Career and Education Opportunities for Welders in Milwaukee, Wisconsin
Welders can find many career and educational opportunities in the Milwaukee, Wisconsin area. There are currently 11,880 jobs for welders in Wisconsin and this is projected to grow 9% to about 12,930 jobs by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $17 hourly or $35,710 yearly on average in Wisconsin. Nationally they average about $16 per hour or $33,560 per year. Compared with people working in the overall category of Foundry and Metal Work, people working as welders in Wisconsin earn more. They earn more than people working in the overall category of Foundry and Metal Work nationally.
There are three schools within twenty-five miles of Milwaukee where you can study to be a welder, among thirty-nine schools of higher education total in the Milwaukee area. Welders usually hold less than a high school diploma, so you can expect to spend only a short time training to become a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Milwaukee include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Milwaukee Area Technical College - Milwaukee, WI
Milwaukee Area Technical College, 700 W State St, Milwaukee, WI 53233-1443. Milwaukee Area Technical College is a large college located in Milwaukee, Wisconsin. It is a public school with primarily 2-year programs. It has 18,780 students and an admission rate of 54%. Milwaukee Area Technical College has a one to two year and an associate's degree program in Welding Technology/Welder which graduated twenty-five and six students respectively in 2008.
Waukesha County Technical College - Pewaukee, WI
Waukesha County Technical College, 800 Main Street, Pewaukee, WI 53072-4601. Waukesha County Technical College is a medium sized college located in Pewaukee, Wisconsin. It is a public school with primarily 2-year programs and has 6,955 students. Waukesha County Technical College has a one to two year program in Welding Technology/Welder which graduated nineteen students in 2008.
Gateway Technical College - Kenosha, WI
Gateway Technical College, 3520 30th Ave, Kenosha, WI 53144-1690. Gateway Technical College is a medium sized college located in Kenosha, Wisconsin. It is a public school with primarily 2-year programs and has 7,587 students. Gateway Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twenty and nine students respectively in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
Licensing agency: Dept of Commerce
Address: Safety & Buildings, 201 W. Washington Ave., P.O. Box 7082, Madison, WI 53707-7082
Phone: (608) 261-8500
Website: Dept of Commerce Safety & Buildings
LOCATION INFORMATION: Milwaukee, Wisconsin
Milwaukee is located in Milwaukee County, Wisconsin. It has a population of over 604,477, which has grown by 1.3% over the last ten years. The cost of living index in Milwaukee, 87, is well below the national average. New single-family homes in Milwaukee cost $167,400 on average, which is far less than the state average. In 2008, ninety-six new homes were built in Milwaukee, down from one hundred sixty-seven the previous year.
The three most popular industries for women in Milwaukee are health care, educational services, and finance and insurance. For men, it is administrative and support and waste management services, construction, and accommodation and food services. The average travel time to work is about 23 minutes. More than 18.3% of Milwaukee residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.0%, is lower than the state average.
The unemployment rate in Milwaukee is 10.6%, which is greater than Wisconsin's average of 7.7%.
The percentage of Milwaukee residents that are affiliated with a religious congregation, 47.5%, is less than both the national and state average. Church of the Epiphany, Saint Mark African Methodist Episcopal Church and German Full Gospel Church are among the churches located in Milwaukee. The largest religious groups are the Catholic Church, the Lutheran Church and the Evangelical Lutheran Church in America.
Milwaukee is home to the Caroline Hall and the Wood as well as Cannon Park and Fifth Ward Playground. Shopping malls in the area include Juneau Village Shopping Center, Times Square Shopping Center and Grand Avenue Mall Shopping Center. Visitors to Milwaukee can choose from Edge-O-Town Motel, Manor House Hotel and Days Inn West Allis for temporary stays in the area.