Career and Education Opportunities for Tool and Die Makers in Milwaukee, Wisconsin
Milwaukee, Wisconsin provides a wide variety of opportunities, both career and educational, for tool and die makers. The national trend for tool and die makers sees this job pool shrinking by about 8.0% over the next eight years. Tool and die makers generally analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
Income for tool and die makers is about $22 per hour or $47,770 yearly on average in Wisconsin. Nationally, their income is about $22 per hour or $46,430 annually. Incomes for tool and die makers are better than in the overall category of Foundry and Metal Work in Wisconsin, and better than the overall Foundry and Metal Work category nationally.
There are thirty-nine schools of higher education in the Milwaukee area, including two within twenty-five miles of Milwaukee where you can get a degree to start your career as a tool and die maker. The most common level of education for tool and die makers is a post-secondary certificate. It will take a short time to learn to be a tool and die maker if you already have a high school diploma.
CAREER DESCRIPTION: Tool and Die Maker
In general, tool and die makers analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
Tool and die makers lift and secure machined components on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. They also fit and assemble components to make or modify dies, jigs and tools, using machine tools and hand tools. Equally important, tool and die makers have to file and adjust different components to properly fit them together. They are often called upon to study blueprints or specifications to develop sequences of operations for fabricating tools or assemblies. They are expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators. Finally, tool and die makers decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance.
Every day, tool and die makers are expected to be able to organize information in a variety of ways. They need to maintain precise control of objects and devices through a range of movements. It is also important that they listen to and understand others in meetings.
It is important for tool and die makers to inspect finished dies for smoothness and defects. They are often called upon to prepare and operate conventional or computer numerically controlled machine tools such as lathes and grinders to cut or otherwise shape components to prescribed dimensions and finishes. They also conduct test runs with completed tools or dies to insure that components meet specifications, making adjustments as needed. They are sometimes expected to set pyrometer controls of heat-treating furnaces and feed or place components, tools, or assemblies into furnaces to harden. Somewhat less frequently, tool and die makers are also expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators.
and decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance. And finally, they sometimes have to measure and scribe metal or plastic stock to lay out machining, using instruments such as protractors and rulers.
Like many other jobs, tool and die makers must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Milwaukee include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Printing Press Machine Operator. Set up or operate various types of printing machines, such as offset, letterset, or gravure presses or screen printers to produce print on paper or other materials.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Tool and Die Maker Training
Milwaukee Area Technical College - Milwaukee, WI
Milwaukee Area Technical College, 700 W State St, Milwaukee, WI 53233-1443. Milwaukee Area Technical College is a large college located in Milwaukee, Wisconsin. It is a public school with primarily 2-year programs. It has 18,780 students and an admission rate of 54%. Milwaukee Area Technical College has a less than one year and a two to four year program in Tool and Die Technology/Technician which graduated one and one students respectively in 2008.
Waukesha County Technical College - Pewaukee, WI
Waukesha County Technical College, 800 Main Street, Pewaukee, WI 53072-4601. Waukesha County Technical College is a medium sized college located in Pewaukee, Wisconsin. It is a public school with primarily 2-year programs and has 6,955 students. Waukesha County Technical College has a one to two year program in Tool and Die Technology/Technician which graduated thirteen students in 2008.
LOCATION INFORMATION: Milwaukee, Wisconsin
Milwaukee is located in Milwaukee County, Wisconsin. It has a population of over 604,477, which has grown by 1.3% over the last ten years. The cost of living index in Milwaukee, 87, is well below the national average. New single-family homes in Milwaukee cost $167,400 on average, which is far less than the state average. In 2008, ninety-six new homes were built in Milwaukee, down from one hundred sixty-seven the previous year.
The three most popular industries for women in Milwaukee are health care, educational services, and finance and insurance. For men, it is administrative and support and waste management services, construction, and accommodation and food services. The average travel time to work is about 23 minutes. More than 18.3% of Milwaukee residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.0%, is lower than the state average.
The unemployment rate in Milwaukee is 10.6%, which is greater than Wisconsin's average of 7.7%.
The percentage of Milwaukee residents that are affiliated with a religious congregation, 47.5%, is less than both the national and state average. Church of the Epiphany, Saint Mark African Methodist Episcopal Church and German Full Gospel Church are among the churches located in Milwaukee. The largest religious groups are the Catholic Church, the Lutheran Church and the Evangelical Lutheran Church in America.
Milwaukee is home to the Caroline Hall and the Wood as well as Cannon Park and Fifth Ward Playground. Shopping malls in the area include Juneau Village Shopping Center, Times Square Shopping Center and Grand Avenue Mall Shopping Center. Visitors to Milwaukee can choose from Edge-O-Town Motel, Manor House Hotel and Days Inn West Allis for temporary stays in the area.