Career and Education Opportunities for Heat Treating Equipment Operators in Milwaukee, Wisconsin
Heat treating equipment operators can find both educational opportunities and jobs in the Milwaukee, Wisconsin area. The national trend for heat treating equipment operators sees this job pool shrinking by about 10.6% over the next eight years. Heat treating equipment operators generally set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
The income of a heat treating equipment operator is about $14 hourly or $30,780 yearly on average in Wisconsin. In the U.S. as a whole, their income is about $15 per hour or $32,030 per year on average. Earnings for heat treating equipment operators are not quite as good as earnings in the general category of Foundry and Metal Work in Wisconsin and not quite as good as general Foundry and Metal Work category earnings nationally.
There are thirty-nine schools of higher education in the Milwaukee area, including three within twenty-five miles of Milwaukee where you can get a degree to start your career as a heat treating equipment operator. Given that the most common education level for heat treating equipment operators is a high school diploma or GED, you can expect to spend only a short time training to become a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Milwaukee include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
Milwaukee Area Technical College - Milwaukee, WI
Milwaukee Area Technical College, 700 W State St, Milwaukee, WI 53233-1443. Milwaukee Area Technical College is a large college located in Milwaukee, Wisconsin. It is a public school with primarily 2-year programs. It has 18,780 students and an admission rate of 54%. Milwaukee Area Technical College has 2 areas of study related to Heat Treating Equipment Operator. They are:
- Machine Tool Technology/Machinist, less than one year, one to two year, and associate's degree.
- Machine Shop Technology/Assistant, less than one year and one to two year which graduated zero and fourteen students respectively in 2008.
Waukesha County Technical College - Pewaukee, WI
Waukesha County Technical College, 800 Main Street, Pewaukee, WI 53072-4601. Waukesha County Technical College is a medium sized college located in Pewaukee, Wisconsin. It is a public school with primarily 2-year programs and has 6,955 students. Waukesha County Technical College has 2 areas of study related to Heat Treating Equipment Operator. They are:
- Machine Tool Technology/Machinist, one to two year which graduated 4 students in 2008.
- Machine Shop Technology/Assistant, one to two year which graduated 1 student in 2008.
Gateway Technical College - Kenosha, WI
Gateway Technical College, 3520 30th Ave, Kenosha, WI 53144-1690. Gateway Technical College is a medium sized college located in Kenosha, Wisconsin. It is a public school with primarily 2-year programs and has 7,587 students. Gateway Technical College has a one to two year and an associate's degree program in Machine Tool Technology/Machinist which graduated zero and thirteen students respectively in 2008.
LOCATION INFORMATION: Milwaukee, Wisconsin
Milwaukee is located in Milwaukee County, Wisconsin. It has a population of over 604,477, which has grown by 1.3% over the last ten years. The cost of living index in Milwaukee, 87, is well below the national average. New single-family homes in Milwaukee cost $167,400 on average, which is far less than the state average. In 2008, ninety-six new homes were built in Milwaukee, down from one hundred sixty-seven the previous year.
The three most popular industries for women in Milwaukee are health care, educational services, and finance and insurance. For men, it is administrative and support and waste management services, construction, and accommodation and food services. The average travel time to work is about 23 minutes. More than 18.3% of Milwaukee residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.0%, is lower than the state average.
The unemployment rate in Milwaukee is 10.6%, which is greater than Wisconsin's average of 7.7%.
The percentage of Milwaukee residents that are affiliated with a religious congregation, 47.5%, is less than both the national and state average. Church of the Epiphany, Saint Mark African Methodist Episcopal Church and German Full Gospel Church are among the churches located in Milwaukee. The largest religious groups are the Catholic Church, the Lutheran Church and the Evangelical Lutheran Church in America.
Milwaukee is home to the Caroline Hall and the Wood as well as Cannon Park and Fifth Ward Playground. Shopping malls in the area include Juneau Village Shopping Center, Times Square Shopping Center and Grand Avenue Mall Shopping Center. Visitors to Milwaukee can choose from Edge-O-Town Motel, Manor House Hotel and Days Inn West Allis for temporary stays in the area.