Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Heat Treating Equipment Operators in Vancouver, Washington

Vancouver, Washington provides a wide variety of opportunities, both career and educational, for heat treating equipment operators. The national trend for heat treating equipment operators sees this job pool shrinking by about 10.6% over the next eight years. In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Heat treating equipment operators earn approximately $14 hourly or $30,560 yearly on average in Washington. Nationally they average about $15 hourly or $32,030 yearly. Earnings for heat treating equipment operators are not quite as good as earnings in the general category of Foundry and Metal Work in Washington and not quite as good as general Foundry and Metal Work category earnings nationally.

There are four schools within twenty-five miles of Vancouver where you can study to be a heat treating equipment operator, among forty-eight schools of higher education total in the Vancouver area. The most common level of education for heat treating equipment operators is a high school diploma or GED. You can expect to spend only a short time studying to be a heat treating equipment operator if you already have a high school diploma.

CAREER DESCRIPTION: Heat Treating Equipment Operator

In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.

Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.

Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.

Similar jobs with educational opportunities in Vancouver include:

  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training

Mt Hood Community College - Gresham, OR

Mt Hood Community College, 26000 SE Stark St, Gresham, OR 97030. Mt Hood Community College is a medium sized college located in Gresham, Oregon. It is a public school with primarily 2-year programs and has 7,251 students. Mt Hood Community College has 2 areas of study related to Heat Treating Equipment Operator. They are:

  • Machine Tool Technology/Machinist, one to two year and associate's degree which graduated zero and seven students respectively in 2008.
  • Machine Shop Technology/Assistant, associate's degree.

Portland Community College - Portland, OR

Portland Community College, 12000 SW 49th Avenue, Portland, OR 97219-7132. Portland Community College is a large college located in Portland, Oregon. It is a public school with primarily 2-year programs and has 26,657 students. Portland Community College has 2 areas of study related to Heat Treating Equipment Operator. They are:

  • Machine Tool Technology/Machinist, one to two year, associate's degree, and two to four year which graduated four, three, and two students respectively in 2008.
  • Machine Shop Technology/Assistant, less than one year.

Clackamas Community College - Oregon City, OR

Clackamas Community College, 19600 Molalla Ave, Oregon City, OR 97045-8980. Clackamas Community College is a medium sized college located in Oregon City, Oregon. It is a public school with primarily 2-year programs and has 6,701 students. Clackamas Community College has a less than one year and a one to two year program in Machine Tool Technology/Machinist.

Clark College - Vancouver, WA

Clark College, 1933 Fort Vancouver Way, Vancouver, WA 98663-3598. Clark College is a large college located in Vancouver, Washington. It is a public school with primarily 2-year programs and has 10,378 students. Clark College has an associate's degree program in Machine Tool Technology/Machinist which graduated two students in 2008.

LOCATION INFORMATION: Vancouver, Washington

Vancouver, Washington
Vancouver, Washington photo by Matthiasb

Vancouver is located in Clark County, Washington. It has a population of over 163,186, which has grown by 13.7% in the past ten years. The cost of living index in Vancouver, 98, is near the national average. New single-family homes in Vancouver are priced at $95,700 on average, which is far less than the state average. In 2008, two hundred eighty new homes were built in Vancouver, down from four hundred twenty the previous year.

The three most popular industries for women in Vancouver are health care, educational services, and accommodation and food services. For men, it is construction, computer and electronic products, and accommodation and food services. The average travel time to work is about 23 minutes. More than 21.7% of Vancouver residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 7.4%, is lower than the state average.

The unemployment rate in Vancouver is 7.8%, which is less than Washington's average of 8.7%.

The percentage of Vancouver residents that are affiliated with a religious congregation, 27.9%, is less than both the national and state average. The most prominent religious groups are the Catholic Church, the LDS (Mormon) Church and the Evangelical Lutheran Church in America.

Vancouver is home to the Vancouver Square and the Vancouver Plaza as well as Leverich Park and Wintler Park. Shopping malls in the area include Arbours Shopping Center, Millport Shopping Center and Vancouver Village Shopping Center. Visitors to Vancouver can choose from Comfort Suites Vancouver, Homewood Suites Portland-Vancouver and Best Western Hotel and Suites Vacouver Mall Dr for temporary stays in the area.