Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Welders in Seattle, Washington

There is a wide variety of career and education opportunities for welders in the Seattle, Washington area. About 8,030 people are currently employed as welders in Washington. By 2016, this is expected to grow 10% to 8,840 people employed. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Welders earn approximately $19 hourly or $40,380 annually on average in Washington. Nationally they average about $16 hourly or $33,560 annually. Incomes for welders are better than in the overall category of Foundry and Metal Work in Washington, and better than the overall Foundry and Metal Work category nationally.

There are ten schools within twenty-five miles of Seattle where you can study to be a welder, among sixty-five schools of higher education total in the Seattle area. Given that the most common education level for welders is less than a high school diploma, it will take only a short time to learn to be a welder if you already have a high school diploma.

CAREER DESCRIPTION: Welder

In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.

Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.

It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.

Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.

Like many other jobs, welders must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Seattle include:

  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
  • Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
  • Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Welder Training

Pierce College at Fort Steilacoom - Lakewood, WA

Pierce College at Fort Steilacoom, 9401 Farwest Dr SW, Lakewood, WA 98498-1999. Pierce College at Fort Steilacoom is a medium sized college located in Lakewood, Washington. It is a public school with primarily 2-year programs and has 6,632 students. Pierce College at Fort Steilacoom has a less than one year and a one to two year program in Welding Technology/Welder which graduated forty-seven and fourteen students respectively in 2008.

Clover Park Technical College - Lakewood, WA

Clover Park Technical College, 4500 Steilacoom Blvd SW, Lakewood, WA 98499-4004. Clover Park Technical College is a medium sized college located in Lakewood, Washington. It is a public school with primarily 2-year programs and has 3,781 students. Clover Park Technical College has a one to two year program in Welding Technology/Welder which graduated two students in 2008.

Everett Community College - Everett, WA

Everett Community College, 2000 Tower Street, Everett, WA 98201. Everett Community College is a medium sized college located in Everett, Washington. It is a public school with primarily 2-year programs and has 5,765 students. Everett Community College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated one, one, and two students respectively in 2008.

Green River Community College - Auburn, WA

Green River Community College, 12401 SE 320th St, Auburn, WA 98092-3622. Green River Community College is a medium sized college located in Auburn, Washington. It is a public school with primarily 2-year programs and has 7,544 students. Green River Community College has a less than one year and an associate's degree program in Welding Technology/Welder which graduated twenty-two and two students respectively in 2008.

Lake Washington Technical College - Kirkland, WA

Lake Washington Technical College, 11605 132nd Ave NE, Kirkland, WA 98034-8506. Lake Washington Technical College is a small college located in Kirkland, Washington. It is a public school with primarily 2-year programs and has 3,010 students. Lake Washington Technical College has a one to two year and an associate's degree program in Welding Technology/Welder which graduated twelve and six students respectively in 2008.

Bates Technical College - Tacoma, WA

Bates Technical College, 1101 S Yakima Ave, Tacoma, WA 98405. Bates Technical College is a medium sized college located in Tacoma, Washington. It is a public school with primarily 2-year programs and has 2,807 students. Bates Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated four and one students respectively in 2008.

Seattle Community College-South Campus - Seattle, WA

Seattle Community College-South Campus, 6000 16th Ave SW, Seattle, WA 98106-1499. Seattle Community College-South Campus is a medium sized college located in Seattle, Washington. It is a public school with primarily 4-year or above programs and has 5,319 students. Seattle Community College-South Campus has a one to two year and an associate's degree program in Welding Technology/Welder which graduated one and one students respectively in 2008.

Olympic College - Bremerton, WA

Olympic College, 1600 Chester Ave, Bremerton, WA 98337-1699. Olympic College is a medium sized college located in Bremerton, Washington. It is a public school with primarily 4-year or above programs and has 6,596 students. Olympic College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated seventy-three, one, and four students respectively in 2008.

Renton Technical College - Renton, WA

Renton Technical College, 3000 NE Fourth St, Renton, WA 98056-4195. Renton Technical College is a small college located in Renton, Washington. It is a public school with primarily 2-year programs and has 4,708 students. Renton Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twelve and five students respectively in 2008.

Edmonds Community College - Lynnwood, WA

Edmonds Community College, 20000 68th Ave W, Lynnwood, WA 98036-5912. Edmonds Community College is a medium sized college located in Lynnwood, Washington. It is a public school with primarily 2-year programs and has 7,823 students. Edmonds Community College has a one to two year program in Welding Technology/Welder which graduated one student in 2008.

CERTIFICATIONS

Radiographic Interpreter: The program, based upon requirements contained within AWS B5.

For more information, see the American Welding Society website.

Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.

For more information, see the American Welding Society website.

LOCATION INFORMATION: Seattle, Washington

Seattle, Washington
Seattle, Washington photo by Dschwen

Seattle is located in King County, Washington. It has a population of over 598,541, which has grown by 6.2% in the past ten years. The cost of living index in Seattle, 126, is far greater than the national average. New single-family homes in Seattle are valued at $206,700 on average, which is well below the state average. In 2008, five hundred ninety-five new homes were built in Seattle, down from seven hundred seventy-five the previous year.

The three big industries for women in Seattle are health care, professional, scientific, and technical services, and educational services. For men, it is professional, scientific, and technical services, construction, and educational services. The average commute to work is about 25 minutes. More than 47.2% of Seattle residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 17.3%, is higher than the state average.

The unemployment rate in Seattle is 7.8%, which is less than Washington's average of 8.7%.

The percentage of Seattle residents that are affiliated with a religious congregation, 37.3%, is less than the national average but more than the state average. The largest religious groups are the Catholic Church, the LDS (Mormon) Church and the Evangelical Lutheran Church in America.

Seattle is home to the Berth 5 and the Akli Point Lighthouse as well as Lincoln Park and Myrtle Edwards Park. Shopping centers in the area include Lake City Shopping Center, Westwood Village Shopping Center and Oak Tree Village Shopping Center. Visitors to Seattle can choose from A-1 Motel, Arlington Suites and Marriott Sea-Tac Airport for temporary stays in the area.