Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Heat Treating Equipment Operators in Seattle, Washington

Heat treating equipment operators can find many career and educational opportunities in the Seattle, Washington area. The national trend for heat treating equipment operators sees this job pool shrinking by about 10.6% over the next eight years. Heat treating equipment operators generally set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Heat treating equipment operators earn approximately $14 hourly or $30,560 yearly on average in Washington. Nationally they average about $15 per hour or $32,030 annually. Earnings for heat treating equipment operators are not quite as good as earnings in the general category of Foundry and Metal Work in Washington and not quite as good as general Foundry and Metal Work category earnings nationally.

There are sixty-five schools of higher education in the Seattle area, including seven within twenty-five miles of Seattle where you can get a degree to start your career as a heat treating equipment operator. Heat treating equipment operators usually hold a high school diploma or GED, so it will take only a short time to learn to be a heat treating equipment operator if you already have a high school diploma.

CAREER DESCRIPTION: Heat Treating Equipment Operator

In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.

Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.

Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.

Similar jobs with educational opportunities in Seattle include:

  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training

Shoreline Community College - Shoreline, WA

Shoreline Community College, 16101 Greenwood Ave N, Shoreline, WA 98133-5696. Shoreline Community College is a medium sized college located in Shoreline, Washington. It is a public school with primarily 2-year programs and has 5,823 students. Shoreline Community College has a one to two year program in Machine Tool Technology/Machinist which graduated eleven students in 2008.

Clover Park Technical College - Lakewood, WA

Clover Park Technical College, 4500 Steilacoom Blvd SW, Lakewood, WA 98499-4004. Clover Park Technical College is a medium sized college located in Lakewood, Washington. It is a public school with primarily 2-year programs and has 3,781 students. Clover Park Technical College has a less than one year and an associate's degree program in Machine Tool Technology/Machinist which graduated one and four students respectively in 2008.

Everett Community College - Everett, WA

Everett Community College, 2000 Tower Street, Everett, WA 98201. Everett Community College is a medium sized college located in Everett, Washington. It is a public school with primarily 2-year programs and has 5,765 students. Everett Community College has a less than one year and an associate's degree program in Machine Tool Technology/Machinist which graduated seven and one students respectively in 2008.

Green River Community College - Auburn, WA

Green River Community College, 12401 SE 320th St, Auburn, WA 98092-3622. Green River Community College is a medium sized college located in Auburn, Washington. It is a public school with primarily 2-year programs and has 7,544 students. Green River Community College has an associate's degree program in Machine Tool Technology/Machinist which graduated one student in 2008.

Lake Washington Technical College - Kirkland, WA

Lake Washington Technical College, 11605 132nd Ave NE, Kirkland, WA 98034-8506. Lake Washington Technical College is a small college located in Kirkland, Washington. It is a public school with primarily 2-year programs and has 3,010 students. Lake Washington Technical College has an associate's degree program in Machine Tool Technology/Machinist which graduated three students in 2008.

Bates Technical College - Tacoma, WA

Bates Technical College, 1101 S Yakima Ave, Tacoma, WA 98405. Bates Technical College is a medium sized college located in Tacoma, Washington. It is a public school with primarily 2-year programs and has 2,807 students. Bates Technical College has a one to two year and an associate's degree program in Machine Tool Technology/Machinist which graduated four and four students respectively in 2008.

Renton Technical College - Renton, WA

Renton Technical College, 3000 NE Fourth St, Renton, WA 98056-4195. Renton Technical College is a small college located in Renton, Washington. It is a public school with primarily 2-year programs and has 4,708 students. Renton Technical College has a two to four year program in Machine Tool Technology/Machinist which graduated four students in 2008.

LOCATION INFORMATION: Seattle, Washington

Seattle, Washington
Seattle, Washington photo by Dschwen

Seattle is located in King County, Washington. It has a population of over 598,541, which has grown by 6.2% in the past ten years. The cost of living index in Seattle, 126, is far greater than the national average. New single-family homes in Seattle are valued at $206,700 on average, which is well below the state average. In 2008, five hundred ninety-five new homes were built in Seattle, down from seven hundred seventy-five the previous year.

The three big industries for women in Seattle are health care, professional, scientific, and technical services, and educational services. For men, it is professional, scientific, and technical services, construction, and educational services. The average commute to work is about 25 minutes. More than 47.2% of Seattle residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 17.3%, is higher than the state average.

The unemployment rate in Seattle is 7.8%, which is less than Washington's average of 8.7%.

The percentage of Seattle residents that are affiliated with a religious congregation, 37.3%, is less than the national average but more than the state average. The largest religious groups are the Catholic Church, the LDS (Mormon) Church and the Evangelical Lutheran Church in America.

Seattle is home to the Berth 5 and the Akli Point Lighthouse as well as Lincoln Park and Myrtle Edwards Park. Shopping centers in the area include Lake City Shopping Center, Westwood Village Shopping Center and Oak Tree Village Shopping Center. Visitors to Seattle can choose from A-1 Motel, Arlington Suites and Marriott Sea-Tac Airport for temporary stays in the area.