Career and Education Opportunities for Layout Technicians in Midland, Texas
Layout technician career and educational opportunities abound in Midland, Texas. About 1,420 people are currently employed as layout technicians in Texas. By 2016, this is expected to shrink 8% to about 1,300 people employed. This is better than the national trend for layout technicians, which sees this job pool shrinking by about 11.6% over the next eight years. In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
Layout technicians earn about $14 hourly or $30,600 yearly on average in Texas and about $16 hourly or $34,920 annually on average nationally. Earnings for layout technicians are better than earnings in the general category of Foundry and Metal Work in Texas and better than general Foundry and Metal Work category earnings nationally.
The Midland area is home to five schools of higher education, including one within twenty-five miles of Midland where you can get a degree as a layout technician. Layout technicians usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Midland include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Odessa College - Odessa, TX
Odessa College, 201 W University, Odessa, TX 79764. Odessa College is a small college located in Odessa, Texas. It is a public school with primarily 2-year programs and has 3,808 students. Odessa College has less than one year, one to two year, and associate's degree programs in Machine Tool Technology/Machinist which graduated nine, zero, and one students respectively in 2008.
LOCATION INFORMATION: Midland, Texas
Midland is situated in Midland County, Texas. It has a population of over 106,561, which has grown by 12.2% over the last ten years. The cost of living index in Midland, 80, is well below the national average. New single-family homes in Midland cost $117,500 on average, which is far less than the state average. In 2008, four hundred eighty-three new homes were built in Midland, down from five hundred fourteen the previous year.
The three big industries for women in Midland are health care, educational services, and mining, quarrying, and oil and gas extraction. For men, it is mining, quarrying, and oil and gas extraction, construction, and health care. The average commute to work is about 17 minutes. More than 27.2% of Midland residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 7.0%, is lower than the state average.
The unemployment rate in Midland is 5.7%, which is less than Texas's average of 8.1%.
The percentage of Midland residents that are affiliated with a religious congregation, 61.5%, is more than both the national and state average. Alamo Heights Church, Ellis Chapel North Church and Primera Iglesia Bautista Church are among the churches located in Midland. The most common religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Midland is home to the Windmill Number Three and the Ranchland Hills Country Club as well as Tolbert Park and Doug Russell Park. Visitors to Midland can choose from Best Inn & Suites - Harrys Bar & Grill, Bradford Inn and Budget Inn for temporary stays in the area.