Career and Education Opportunities for Product Safety Engineers in Irving, Texas
Irving, Texas provides a wide variety of opportunities, both career and educational, for product safety engineers. There are currently 2,460 working product safety engineers in Texas; this should grow by 16% to 2,860 working product safety engineers in the state by 2016. This is better than the national trend for product safety engineers, which sees this job pool growing by about 10.3% over the next eight years. In general, product safety engineers develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
Product safety engineers earn approximately $36 per hour or $76,410 per year on average in Texas. Nationally they average about $34 per hour or $72,490 annually. Incomes for product safety engineers are not quite as good as in the overall category of Engineering in Texas, and not quite as good as the overall Engineering category nationally. Product safety engineers work in a variety of jobs, including: product safety manager, system safety engineer, and product safety tester.
There are eighty-three schools of higher education in the Irving area, including one within twenty-five miles of Irving where you can get a degree to start your career as a product safety engineer. Product safety engineers usually hold a Bachelor's degree, so you can expect to spend about four years studying to be a product safety engineer if you already have a high school diploma.
CAREER DESCRIPTION: Product Safety Engineer
In general, product safety engineers develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
Product safety engineers evaluate potential health hazards or damage that could occur from product misuse. They also participate in preparation of product usage and precautionary label instructions. Equally important, product safety engineers have to recommend processes for detection and elimination of physical or other product hazards. They are often called upon to conduct research to review safety levels for products. They are expected to investigate causes of accidents or illnesses pertaining to product usage in order to evolve solutions to minimize or avoid recurrence. Finally, product safety engineers report accident investigation findings.
Every day, product safety engineers are expected to be able to evaluate problems as they arise. It is also important that they listen to and understand others in meetings.
And finally, they sometimes have to recommend processes for detection and elimination of physical or other product hazards.
Like many other jobs, product safety engineers must have exceptional integrity and be thorough and dependable.
Similar jobs with educational opportunities in Irving include:
- Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
- Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
- Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
- Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
EDUCATIONAL OPPORTUNITIES: Product Safety Engineer Training
Southern Methodist University - Dallas, TX
Southern Methodist University, 6425 Boaz St, Dallas, TX 75275-0221. Southern Methodist University is a large university located in Dallas, Texas. It is a private not-for-profit school with primarily 4-year or above programs. It has 10,965 students and an admission rate of 50%. Southern Methodist University has a bachelor's degree and a master's degree program in Environmental/Environmental Health Engineering which graduated two and four students respectively in 2008.
Risk Management for Public Entities: Understand the unique nature of the public sector.
For more information, see the American Institute for CPCU and Insurance Institute of America website.
Certified Energy Manager: Since its inception in 1981, the Certified Energy Manager (CEM®) credential has become widely accepted and used as a measure of professional accomplishment within the energy management field.
For more information, see the Association of Energy Engineers website.
Certified Water Technologist: The Certified Water Technologist (CWT) program represents the highest professional credential in the industrial and commercial water treatment field.
For more information, see the Association of Water Technologies website.
Certified Professional Ergonomist: The BCPE was established to provide a formal process for recognizing practitioners of human factors/ergonomics.
For more information, see the Board of Certification in Professional Ergonomics website.
Certified Environmental Health Technician: CEHT is for individuals who are interested in field intensive environmental health activities--such as testing, sampling, and inspections, and who are required to provide information on safe environmental health practices and to eliminate environmental health hazards.
For more information, see the National Environmental Health Association website.
Inspection and Testing of Water-Based Systems: This certification program was designed for engineering technicians in the automatic fire sprinkler industry who are engaged in the physical and mechanical aspects of inspection, testing, and maintenance of water-based systems including foam and foam-water systems.
Registered Radiation Protection Technologist: A Radiation Protection Technologist is a person engaged in providing radiation protection to the radiation worker, the general public, and the environment from the effects of ionizing radiation.
For more information, see the National Registry of Radiation Protection Technologists website.
Municipal Solid Waste Management Systems - Technical Associate: By earning this certification, you will demonstrate knowledge and proficiency that only the top in a field can show.
For more information, see the Solid Waste Association of North America website.
Bioreactor Landfill - Technical Associate: By earning this certification, you will demonstrate knowledge and proficiency in this new technology.
For more information, see the Solid Waste Association of North America website.
LOCATION INFORMATION: Irving, Texas
Irving is located in Dallas County, Texas. It has a population of over 201,358, which has grown by 5.1% in the past ten years. The cost of living index in Irving, 91, is below the national average. New single-family homes in Irving cost $273,600 on average, which is far greater than the state average. In 2008, four hundred fifty-seven new homes were built in Irving, down from seven hundred ninety-five the previous year.
The three big industries for women in Irving are finance and insurance, educational services, and health care. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 24 minutes. More than 30.0% of Irving residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.2%, is higher than the state average.
The unemployment rate in Irving is 7.8%, which is less than Texas's average of 8.1%.
The percentage of Irving residents that are affiliated with a religious congregation, 55.1%, is more than the national average but less than the state average. African Baptist Church of Irving, Plymouth Park Church and Chapel of the Bells Church are all churches located in Irving. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Irving is home to the Dallas Gun Club and the Trinity Valley Marketplace as well as Senter Park and Revere Park. Shopping centers in the area include Irving Shopping Center, Plymouth Park Shopping Center and MacArthur Park Shopping Center. Visitors to Irving can choose from American Hospitality Services Corporation, Best Western DFW Airport and Four Seasons Resort and Club Dallas at Las Colinas for temporary stays in the area.