Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.

Career and Education Opportunities for Mechanical Engineers in Irving, Texas

Irving, Texas provides a wide variety of opportunities, both career and educational, for mechanical engineers. Currently, 15,970 people work as mechanical engineers in Texas. This is expected to grow 18% to 18,870 people by 2016. This is better than the nation as a whole, where employment opportunities for mechanical engineers are expected to grow by about 6.0%. Mechanical engineers generally perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment.

Mechanical engineers earn approximately $39 hourly or $81,230 yearly on average in Texas. Nationally they average about $36 per hour or $74,920 yearly. Compared with people working in the overall category of Engineering, people working as mechanical engineers in Texas earn less. They earn less than people working in the overall category of Engineering nationally. People working as mechanical engineers can fill a number of jobs, such as: solar engineer, supplier quality engineer , and brake engineer.

The Irving area is home to eighty-three schools of higher education, including two within twenty-five miles of Irving where you can get a degree as a mechanical engineer. Mechanical engineers usually hold a Bachelor's degree, so you can expect to spend about four years studying to be a mechanical engineer if you already have a high school diploma.

CAREER DESCRIPTION: Mechanical Engineer

Mechanical Engineer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. They also oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.

Mechanical engineers read and interpret blueprints, technical drawings and computer-generated reports. They also design and test models of alternate designs and processing methods to gauge feasibility, operating condition effects, possible new applications and necessity of modification. Equally important, mechanical engineers have to conduct research that tests and analyzes the feasibility, layout, operation and effectiveness of equipment, components and systems. Finally, mechanical engineers specify system components or direct modification of products to insure conformance with engineering layout and performance specifications.

Every day, mechanical engineers are expected to be able to think through problems and come up with general rules. They need to listen to and understand others in meetings. It is also important that they read and understand documents and reports.

It is important for mechanical engineers to talk with engineers and other personnel to execute operating procedures, resolve system malfunctions, and furnish technical data. They are often called upon to recommend layout modifications to remove machine or system malfunctions. They also research and maintain mechanical products, equipment, systems and processes to fit requirements, applying knowledge of engineering principles. They are sometimes expected to assist drafters in developing the structural layout of products using drafting tools or computer-assisted layout (CAD) or drafting equipment and software. Somewhat less frequently, mechanical engineers are also expected to estimate costs and submit bids for engineering or extraction projects, and ready contract documents.

Mechanical engineers sometimes are asked to layout test control apparatus and equipment and develop processes for testing products. They also have to be able to research and analyze customer layout proposals and other data to review the feasibility and maintenance requirements of designs or applications and solicit new business and furnish technical customer service. And finally, they sometimes have to solicit new business and furnish technical customer service.

Like many other jobs, mechanical engineers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.

Similar jobs with educational opportunities in Irving include:

  • Architectural Drafter. Prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
  • Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
  • CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
  • Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
  • Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
  • Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
  • Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
  • Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
  • Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
  • Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
  • Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
  • Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
  • Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
  • Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
  • Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
  • Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.

EDUCATIONAL OPPORTUNITIES: Mechanical Engineer Training

University of North Texas - Denton, TX

University of North Texas, Chestnut Ave., Denton, TX 76203-1277. University of North Texas is a large university located in Denton, Texas. It is a public school with primarily 4-year or above programs. It has 34,795 students and an admission rate of 64%. University of North Texas has a bachelor's degree and a master's degree program in Mechanical Engineering.

Southern Methodist University - Dallas, TX

Southern Methodist University, 6425 Boaz St, Dallas, TX 75275-0221. Southern Methodist University is a large university located in Dallas, Texas. It is a private not-for-profit school with primarily 4-year or above programs. It has 10,965 students and an admission rate of 50%. Southern Methodist University has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated two, eighteen, and three students respectively in 2008.


Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.

For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.

Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.

For more information, see the American Society of Mechanical Engineers International website.

Certified in Plumbing Design: The Certified in Plumbing Design (CPD) program is an international certification program for engineers and designers of plumbing systems.

For more information, see the American Society of Plumbing Engineers website.

Certified Associate in Materials Handling: MHMS is proud to offer a professional certification program for its members.

For more information, see the Materials Handling and Management Society website.

PV Installer Certification: The target candidate for NABCEP certification is the person responsible for the system installation (e.

For more information, see the North American Board of Certified Energy Practitioners website.


Irving, Texas
Irving, Texas photo by Ansem27

Irving is located in Dallas County, Texas. It has a population of over 201,358, which has grown by 5.1% in the past ten years. The cost of living index in Irving, 91, is below the national average. New single-family homes in Irving cost $273,600 on average, which is far greater than the state average. In 2008, four hundred fifty-seven new homes were built in Irving, down from seven hundred ninety-five the previous year.

The three big industries for women in Irving are finance and insurance, educational services, and health care. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 24 minutes. More than 30.0% of Irving residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.2%, is higher than the state average.

The unemployment rate in Irving is 7.8%, which is less than Texas's average of 8.1%.

The percentage of Irving residents that are affiliated with a religious congregation, 55.1%, is more than the national average but less than the state average. African Baptist Church of Irving, Plymouth Park Church and Chapel of the Bells Church are all churches located in Irving. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Irving is home to the Dallas Gun Club and the Trinity Valley Marketplace as well as Senter Park and Revere Park. Shopping centers in the area include Irving Shopping Center, Plymouth Park Shopping Center and MacArthur Park Shopping Center. Visitors to Irving can choose from American Hospitality Services Corporation, Best Western DFW Airport and Four Seasons Resort and Club Dallas at Las Colinas for temporary stays in the area.