Career and Education Opportunities for Welders in Houston, Texas
Welder career and educational opportunities abound in Houston, Texas. Currently, 52,730 people work as welders in Texas. This is expected to grow by 25% to 65,750 people by 2016. This is better than the nation as a whole, where employment opportunities for welders are expected to shrink by about 1.6%. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Income for welders is about $15 hourly or $32,910 yearly on average in Texas. Nationally, their income is about $16 per hour or $33,560 per year. Compared with people working in the overall category of Foundry and Metal Work, people working as welders in Texas earn more. They earn more than people working in the overall category of Foundry and Metal Work nationally.
There are eighty-one schools of higher education in the Houston area, including five within twenty-five miles of Houston where you can get a degree to start your career as a welder. Welders usually hold less than a high school diploma, so you can expect to spend only a short time studying to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Houston include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
College of the Mainland - Texas City, TX
College of the Mainland, 1200 Amburn Road, Texas City, TX 77591-2499. College of the Mainland is a small college located in Texas City, Texas. It is a public school with primarily 2-year programs and has 3,585 students. College of the Mainland has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated eight, zero, and zero students respectively in 2008.
San Jacinto Community College - Pasadena, TX
San Jacinto Community College, 8060 Spencer Hwy, Pasadena, TX 77501-2007. San Jacinto Community College is a large college located in Pasadena, Texas. It is a public school with primarily 2-year programs and has 24,677 students. San Jacinto Community College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated ten, fifteen, and two students respectively in 2008.
Lee College - Baytown, TX
Lee College, 511 S Whiting, Baytown, TX 77520. Lee College is a medium sized college located in Baytown, Texas. It is a public school with primarily 2-year programs and has 5,968 students. Lee College has a less than one year and an associate's degree program in Welding Technology/Welder which graduated forty-seven and eight students respectively in 2008.
Lone Star College System - The Woodlands, TX
Lone Star College System, 5000 Research Forest Drive, The Woodlands, TX 77381-4399. Lone Star College System is a large college located in The Woodlands, Texas. It is a public school with primarily 2-year programs and has 41,331 students. Lone Star College System has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated zero, ten, and three students respectively in 2008.
Houston Community College System - Houston, TX
Houston Community College System, 3100 Main Street, Houston, TX 77266-7517. Houston Community College System is a large college located in Houston, Texas. It is a public school with primarily 2-year programs and has 48,087 students. Houston Community College System has a less than one year and a one to two year program in Welding Technology/Welder which graduated nine and nine students respectively in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Houston, Texas
Houston is located in Harris County, Texas. It has a population of over 2,242,193, which has grown by 14.8% in the past ten years. The cost of living index in Houston, 89, is well below the national average. New single-family homes in Houston are valued at $173,500 on average, which is near the state average. In 2008, 3,684 new homes were constructed in Houston, down from 6,035 the previous year.
The top three industries for women in Houston are health care, educational services, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and administrative and support and waste management services. The average commute to work is about 27 minutes. More than 27.0% of Houston residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.7%, is higher than the state average.
The unemployment rate in Houston is 8.0%, which is less than Texas's average of 8.1%.
The percentage of Houston residents that are affiliated with a religious congregation, 50.4%, is more than the national average but less than the state average. El Buen Pastor United Methodist Church, 34th Temple Church of God in Christ and Pentecostal Church of God in Christ are some of the churches located in Houston. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Houston is home to the Champion Rod and Gun Club and the Independence Heights Residential Historic District as well as Hermann Park and Hennessey Park. Shopping centers in the area include Windsor Plaza Shopping Center, Meyerland Plaza Shopping Center and Meyerland Shopping Center. Visitors to Houston can choose from Capital Inn, Bradford Homesuites - Houston Galleria and Best Western Fountainview Inn and Suites for temporary stays in the area.