Career and Education Opportunities for Heat Treating Equipment Operators in Houston, Texas
For those living in the Houston, Texas area, there are many career and education opportunities for heat treating equipment operators. Currently, 2,110 people work as heat treating equipment operators in Texas. This is expected to grow by 14% to 2,400 people by 2016. This is better than the national trend for heat treating equipment operators, which sees this job pool shrinking by about 10.6% over the next eight years. In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Heat treating equipment operators earn approximately $12 hourly or $25,120 annually on average in Texas. Nationally they average about $15 per hour or $32,030 per year. Earnings for heat treating equipment operators are not quite as good as earnings in the general category of Foundry and Metal Work in Texas and not quite as good as general Foundry and Metal Work category earnings nationally.
There are three schools within twenty-five miles of Houston where you can study to be a heat treating equipment operator, among eighty-one schools of higher education total in the Houston area. The most common level of education for heat treating equipment operators is a high school diploma or GED. It will take only a short time to learn to be a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Houston include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
School of Automotive Machinists - Houston, TX
School of Automotive Machinists, 1911 Antoine, Houston, TX 77055-1803. School of Automotive Machinists is a small school located in Houston, Texas. It is a private for-profit school with primarily less-than 2-year programs. It has 113 students and an admission rate of 100%. School of Automotive Machinists has a less than one year program in Machine Tool Technology/Machinist.
Lee College - Baytown, TX
Lee College, 511 S Whiting, Baytown, TX 77520. Lee College is a medium sized college located in Baytown, Texas. It is a public school with primarily 2-year programs and has 5,968 students. Lee College has a less than one year and an associate's degree program in Machine Tool Technology/Machinist which graduated four and zero students respectively in 2008.
Houston Community College System - Houston, TX
Houston Community College System, 3100 Main Street, Houston, TX 77266-7517. Houston Community College System is a large college located in Houston, Texas. It is a public school with primarily 2-year programs and has 48,087 students. Houston Community College System has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant which graduated eleven, twenty-one, and one students respectively in 2008.
LOCATION INFORMATION: Houston, Texas
Houston is located in Harris County, Texas. It has a population of over 2,242,193, which has grown by 14.8% in the past ten years. The cost of living index in Houston, 89, is well below the national average. New single-family homes in Houston are valued at $173,500 on average, which is near the state average. In 2008, 3,684 new homes were constructed in Houston, down from 6,035 the previous year.
The top three industries for women in Houston are health care, educational services, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and administrative and support and waste management services. The average commute to work is about 27 minutes. More than 27.0% of Houston residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.7%, is higher than the state average.
The unemployment rate in Houston is 8.0%, which is less than Texas's average of 8.1%.
The percentage of Houston residents that are affiliated with a religious congregation, 50.4%, is more than the national average but less than the state average. El Buen Pastor United Methodist Church, 34th Temple Church of God in Christ and Pentecostal Church of God in Christ are some of the churches located in Houston. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Houston is home to the Champion Rod and Gun Club and the Independence Heights Residential Historic District as well as Hermann Park and Hennessey Park. Shopping centers in the area include Windsor Plaza Shopping Center, Meyerland Plaza Shopping Center and Meyerland Shopping Center. Visitors to Houston can choose from Capital Inn, Bradford Homesuites - Houston Galleria and Best Western Fountainview Inn and Suites for temporary stays in the area.