Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Plumbers in Houston, Texas

There are many career and education opportunities for plumbers in the Houston, Texas area. There are currently 31,910 working plumbers in Texas; this should grow by 23% to 39,360 working plumbers in the state by 2016. This is better than the nation as a whole, where employment opportunities for plumbers are expected to grow by about 15.3%. In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

A person working as a plumber can expect to earn about $19 per hour or $41,490 per year on average in Texas and about $21 per hour or $45,640 annually on average in the U.S. as a whole. Incomes for plumbers are better than in the overall category of Plumbing in Texas, and better than the overall Plumbing category nationally.

The Houston area is home to eighty-one schools of higher education, including two within twenty-five miles of Houston where you can get a degree as a plumber. Given that the most common education level for plumbers is a high school diploma or GED, it will take only a short time to learn to be a plumber if you already have a high school diploma.

CAREER DESCRIPTION: Plumber

Plumber video from the State of New Jersey Dept. of Labor and Workforce Development

In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

Plumbers assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment. They also set up pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools. Equally important, plumbers have to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools. They are often called upon to fill pipes or plumbing fixtures with water or air and observe pressure gauges to uncover and locate leaks. They are expected to measure and bend pipe to required angles, using hand and power tools or machines such as pipe cutters, pipe-threading machines, and pipe-bending machines. Finally, plumbers study building plans and inspect structures to gauge material and equipment needs, to determine the sequence of pipe installations, and to develop installation around obstructions such as electrical wiring.

Every day, plumbers are expected to be able to twist and stretch their arms and legs to get work done. They need to control and manipulate objects at a fine level of detail. It is also important that they control objects and devices with precise control.

It is important for plumbers to keep records of assignments and produce detailed work reports. They are often called upon to clear away debris in a renovation. They also perform complex calculations and planning for special or very large jobs. They are sometimes expected to ready written work cost estimates and negotiate contracts. Somewhat less frequently, plumbers are also expected to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools.

Plumbers sometimes are asked to locate and mark the position of pipe installations and fixtures in structures, using measuring instruments such as rulers and levels. They also have to be able to direct staff working on pipe cutting and preassembly and placement of plumbing systems and components and set up underground storm, sanitary and water piping systems and extend piping to connect fixtures and plumbing to these systems. And finally, they sometimes have to set up oxygen and medical gas in hospitals.

Like many other jobs, plumbers must be reliable and be thorough and dependable.

EDUCATIONAL OPPORTUNITIES: Plumber Training

Lee College - Baytown, TX

Lee College, 511 S Whiting, Baytown, TX 77520. Lee College is a medium sized college located in Baytown, Texas. It is a public school with primarily 2-year programs and has 5,968 students. Lee College has a less than one year and an associate's degree program in Pipefitting/Pipefitter and Sprinkler Fitter which graduated fifty-three and zero students respectively in 2008.

Everest Institute-Bissonnet - Houston, TX

Everest Institute-Bissonnet, 9700 Bissonnet St-Ste 1400, Houston, TX 77036-8001. Everest Institute-Bissonnet is a small school located in Houston, Texas. It is a private for-profit school with primarily less-than 2-year programs. It has 557 students and an admission rate of 46%. Everest Institute-Bissonnet has a less than one year program in Plumbing Technology/Plumber which graduated twenty-two students in 2008.

CERTIFICATIONS

Standard Journeyman Plumber: The International Code Council's National Contractor Trades Examination Program is an independent testing program designed to provide licensing agencies with information regarding.

For more information, see the International Code Council website.

Standard Residential Plumber: The International Code Council's National Contractor Trades Examination Program is an.

For more information, see the International Code Council website.

Journeyman Plumber: This certification is designed to test the knowledge that a journey level plumber has of the Uniform Plumbing Code published by the International Association of Plumbing and Mechanical Officials (IAPMO).

For more information, see the National Inspection, Testing and Certification Corporation website.

Journeyman Pipefitter-Steamfitter: The NITC journey level pipefitting/steamfitting certification is based on a written examination that consists of 100 multiple choice questions.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Installer 6010: This examination is covered under NITC's scope of accreditation by the American Standards Institute (ANSI).

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Specialist 6005: Candidates shall have successfully completed twenty-four (24) hours of training covering all facets of piped medical gas and medical-surgical vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Maintenance Personnel 6040: Candidates must have completed thirty-two (32) hours of training in the maintenance of medical gas/vacuum systems, and have a minimum of one (1) year experience in the maintenance of medical gas/vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Bulk Medical Gas Systems Installer 6015: Certification to this standard shall be through a method approved by the firm's Quality Control Unit (QCU).

For more information, see the National Inspection, Testing and Certification Corporation website.

IAPMO Mechanical Inspector: IAPMO's National Personnel Certification Program for Inspectors, Plans Examiners and Code Administrators is a nationally recognized, comprehensive testing and certification program that assesses the knowledge of construction codes as an indicator of competence and professionalism.

For more information, see the National Inspection, Testing and Certification Corporation website.

Automatic Sprinkler System Layout: This certification program is for engineering technicians engaged in the layout and detailing of automatic sprinkler systems which must meet existing and proposed code and statutory requirements.

For more information, see the National Institute for Certification in Engineering Technologies website.

LICENSES

PLUMBER

Licensing agency: Texas State Board of Plumbing Examiners
Address: PO Box 4200, Austin, TX 78765-4200

Phone: (512) 458-2145
Website: Texas State Board of Plumbing Examiners

LOCATION INFORMATION: Houston, Texas

Houston, Texas
Houston, Texas photo by Hequals2henry

Houston is located in Harris County, Texas. It has a population of over 2,242,193, which has grown by 14.8% in the past ten years. The cost of living index in Houston, 89, is well below the national average. New single-family homes in Houston are valued at $173,500 on average, which is near the state average. In 2008, 3,684 new homes were constructed in Houston, down from 6,035 the previous year.

The top three industries for women in Houston are health care, educational services, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and administrative and support and waste management services. The average commute to work is about 27 minutes. More than 27.0% of Houston residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.7%, is higher than the state average.

The unemployment rate in Houston is 8.0%, which is less than Texas's average of 8.1%.

The percentage of Houston residents that are affiliated with a religious congregation, 50.4%, is more than the national average but less than the state average. El Buen Pastor United Methodist Church, 34th Temple Church of God in Christ and Pentecostal Church of God in Christ are some of the churches located in Houston. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Houston is home to the Champion Rod and Gun Club and the Independence Heights Residential Historic District as well as Hermann Park and Hennessey Park. Shopping centers in the area include Windsor Plaza Shopping Center, Meyerland Plaza Shopping Center and Meyerland Shopping Center. Visitors to Houston can choose from Capital Inn, Bradford Homesuites - Houston Galleria and Best Western Fountainview Inn and Suites for temporary stays in the area.