Career and Education Opportunities for Mechanical Engineers in Grand Prairie, Texas
Mechanical engineers can find both educational opportunities and jobs in the Grand Prairie, Texas area. About 15,970 people are currently employed as mechanical engineers in Texas. By 2016, this is expected to grow by 18% to 18,870 people employed. This is better than the national trend for mechanical engineers, which sees this job pool growing by about 6.0% over the next eight years. In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment.
Income for mechanical engineers is about $39 per hour or $81,230 annually on average in Texas. Nationally, their income is about $36 per hour or $74,920 annually. Incomes for mechanical engineers are not quite as good as in the overall category of Engineering in Texas, and not quite as good as the overall Engineering category nationally. Mechanical engineers work in a variety of jobs, including: plant engineer, tooling engineer, and hydroelectric plant mechanical engineer.
The Grand Prairie area is home to seventy-four schools of higher education, including one within twenty-five miles of Grand Prairie where you can get a degree as a mechanical engineer. Mechanical engineers usually hold a Bachelor's degree, so it will take about four years to learn to be a mechanical engineer if you already have a high school diploma.
CAREER DESCRIPTION: Mechanical Engineer
In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. They also oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
Mechanical engineers read and interpret blueprints, technical drawings and computer-generated reports. They also design and test models of alternate designs and processing methods to gauge feasibility, operating condition effects, possible new applications and necessity of modification. Equally important, mechanical engineers have to conduct research that tests and analyzes the feasibility, layout, operation and effectiveness of equipment, components and systems. Finally, mechanical engineers specify system components or direct modification of products to insure conformance with engineering layout and performance specifications.
Every day, mechanical engineers are expected to be able to think through problems and come up with general rules. They need to listen to and understand others in meetings. It is also important that they read and understand documents and reports.
It is important for mechanical engineers to talk with engineers and other personnel to execute operating procedures, resolve system malfunctions, and furnish technical data. They are often called upon to recommend layout modifications to remove machine or system malfunctions. They also research and maintain mechanical products, equipment, systems and processes to fit requirements, applying knowledge of engineering principles. They are sometimes expected to assist drafters in developing the structural layout of products using drafting tools or computer-assisted layout (CAD) or drafting equipment and software. Somewhat less frequently, mechanical engineers are also expected to estimate costs and submit bids for engineering or extraction projects, and ready contract documents.
Mechanical engineers sometimes are asked to layout test control apparatus and equipment and develop processes for testing products. They also have to be able to research and analyze customer layout proposals and other data to review the feasibility and maintenance requirements of designs or applications and solicit new business and furnish technical customer service. And finally, they sometimes have to solicit new business and furnish technical customer service.
Like many other jobs, mechanical engineers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.
Similar jobs with educational opportunities in Grand Prairie include:
- Architectural Drafter. Prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
- Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
- CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
- Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
- Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
- Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
- Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
- Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
- Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
- Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
EDUCATIONAL OPPORTUNITIES: Mechanical Engineer Training
Southern Methodist University - Dallas, TX
Southern Methodist University, 6425 Boaz St, Dallas, TX 75275-0221. Southern Methodist University is a large university located in Dallas, Texas. It is a private not-for-profit school with primarily 4-year or above programs. It has 10,965 students and an admission rate of 50%. Southern Methodist University has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated two, eighteen, and three students respectively in 2008.
Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified in Plumbing Design: The Certified in Plumbing Design (CPD) program is an international certification program for engineers and designers of plumbing systems.
For more information, see the American Society of Plumbing Engineers website.
Certified Associate in Materials Handling: MHMS is proud to offer a professional certification program for its members.
For more information, see the Materials Handling and Management Society website.
PV Installer Certification: The target candidate for NABCEP certification is the person responsible for the system installation (e.
For more information, see the North American Board of Certified Energy Practitioners website.
LOCATION INFORMATION: Grand Prairie, Texas
Grand Prairie is situated in Dallas County, Texas. It has a population of over 160,641, which has grown by 26.1% over the last ten years. The cost of living index in Grand Prairie, 90, is well below the national average. New single-family homes in Grand Prairie are priced at $174,200 on average, which is near the state average. In 2008, five hundred forty-four new homes were built in Grand Prairie, down from 1,058 the previous year.
The top three industries for women in Grand Prairie are educational services, health care, and finance and insurance. For men, it is construction, transportation equipment, and professional, scientific, and technical services. The average commute to work is about 27 minutes. More than 19.3% of Grand Prairie residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 5.0%, is lower than the state average.
The unemployment rate in Grand Prairie is 8.7%, which is greater than Texas's average of 8.1%.
The percentage of Grand Prairie residents that are affiliated with a religious congregation, 55.1%, is more than the national average but less than the state average. Abundant Life Assembly of God Church, Celestial Church of Christ and Saint Andrew Church are some of the churches located in Grand Prairie. The largest religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
Grand Prairie is home to Kennedy Middle School Football Stadium and Hendrix Park. Visitors to Grand Prairie can choose from Blue Sky Hospitality, Amerisuites and Comfort Inn for temporary stays in the area.