Career and Education Opportunities for Numerical Control Tool Programmers in El Paso, Texas
Numerical control tool programmer career and educational opportunities abound in El Paso, Texas. About 1,030 people are currently employed as numerical control tool programmers in Texas. By 2016, this is expected to grow 18% to about 1,220 people employed. This is better than the national trend for numerical control tool programmers, which sees this job pool shrinking by about 15.4% over the next eight years. In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.
Numerical control tool programmers earn approximately $20 hourly or $42,700 annually on average in Texas. Nationally they average about $21 hourly or $44,310 yearly. Earnings for numerical control tool programmers are better than earnings in the general category of Computer Controls in Texas and better than general Computer Controls category earnings nationally.
The El Paso area is home to seventeen schools of higher education, including two within twenty-five miles of El Paso where you can get a degree as a numerical control tool programmer. Numerical control tool programmers usually hold an Associate's, or other 2-year degree, so it will take about two years to learn to be a numerical control tool programmer if you already have a high school diploma.
CAREER DESCRIPTION: Numerical Control Tool Programmer
In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.
Numerical control tool programmers analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and layout data so as to calculate dimensions and feed rates. They also decide on the sequence of machine operations, and decide on the proper cutting tools needed to machine workpieces into the desired shapes. Equally important, numerical control tool programmers have to modify existing programs to enhance efficiency. They are often called upon to decide on reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures. They are expected to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications. Finally, numerical control tool programmers revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved.
Every day, numerical control tool programmers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they imediately see the relationships between collections of numbers, images, and patterns.
It is important for numerical control tool programmers to enter computer commands to store or retrieve components patterns or programs that transfer data to other media. They are often called upon to ready geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper. They also compare encoded tapes or computer printouts with original part specifications and blueprints to confirm precision of instructions. They are sometimes expected to enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers. Somewhat less frequently, numerical control tool programmers are also expected to write instruction sheets and cutter lists for a machine's controller so as to guide setup and encode numerical control tapes.
Numerical control tool programmers sometimes are asked to draw machine tool paths on pattern film, using colored markers and following guidelines for tool speed and efficiency. and revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved. And finally, they sometimes have to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications.
Like many other jobs, numerical control tool programmers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.
EDUCATIONAL OPPORTUNITIES: Numerical Control Tool Programmer Training
El Paso Community College - El Paso, TX
El Paso Community College, 919 Hunter Drive, El Paso, TX 79915-1908. El Paso Community College is a large college located in El Paso, Texas. It is a public school with primarily 2-year programs and has 25,833 students. El Paso Community College has a less than one year and an associate's degree program in Computer Programming/Programmer which graduated zero and seven students respectively in 2008.
New Mexico State University-Dona Ana - Las Cruces, NM
New Mexico State University-Dona Ana, 3400 S Espina, Las Cruces, NM 88003-8001. New Mexico State University-Dona Ana is a medium sized university located in Las Cruces, New Mexico. It is a public school with primarily 2-year programs and has 8,336 students. New Mexico State University-Dona Ana has a one to two year and an associate's degree program in Data Processing and Data Processing Technology/Technician which graduated three and nineteen students respectively in 2008.
LOCATION INFORMATION: El Paso, Texas
El Paso is situated in El Paso County, Texas. It has a population of over 613,190, which has grown by 8.8% over the last ten years. The cost of living index in El Paso, 80, is well below the national average. New single-family homes in El Paso are priced at $150,600 on average, which is well below the state average. In 2008, 2,521 new homes were built in El Paso, down from 2,666 the previous year.
The three big industries for women in El Paso are educational services, health care, and accommodation and food services. For men, it is construction, educational services, and public administration. The average travel time to work is about 22 minutes. More than 18.3% of El Paso residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.2%, is lower than the state average.
The unemployment rate in El Paso is 8.7%, which is greater than Texas's average of 8.1%.
The percentage of El Paso residents that are affiliated with a religious congregation, 63.4%, is more than both the national and state average. Pentecostal Holiness Church, El Divino Redentor United Methodist Church and El Paso Catholic Church are some of the churches located in El Paso. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.
El Paso is home to the Wyler Aerial Tramway and the Old Fort Bliss as well as Travis White Park and Feather Lake Wildlife Refuge. Shopping centers in the area include Las Palmas Shopping Center, NorthPark Shopping Center and Cielo Vista Shopping Center. Visitors to El Paso can choose from Holiday Inn El Paso, Best Western Airport Inn and Allstate Motel for temporary stays in the area.