Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Product Safety Engineers in El Paso, Texas

Product safety engineers can find both educational opportunities and jobs in the El Paso, Texas area. About 2,460 people are currently employed as product safety engineers in Texas. By 2016, this is expected to grow 16% to 2,860 people employed. This is better than the nation as a whole, where employment opportunities for product safety engineers are expected to grow by about 10.3%. In general, product safety engineers develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.

The income of a product safety engineer is about $36 hourly or $76,410 per year on average in Texas. In the U.S. as a whole, their income is about $34 per hour or $72,490 per year on average. Compared with people working in the overall category of Engineering, people working as product safety engineers in Texas earn less. They earn less than people working in the overall category of Engineering nationally. People working as product safety engineers can fill a number of jobs, such as: product safety manager, product safety coordinator, and product safety consultant.

There are two schools within twenty-five miles of El Paso where you can study to be a product safety engineer, among seventeen schools of higher education total in the El Paso area. Product safety engineers usually hold a Bachelor's degree, so you can expect to spend about four years studying to be a product safety engineer if you already have a high school diploma.

CAREER DESCRIPTION: Product Safety Engineer

Product Safety Engineer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, product safety engineers develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.

Product safety engineers evaluate potential health hazards or damage that could occur from product misuse. They also participate in preparation of product usage and precautionary label instructions. Equally important, product safety engineers have to recommend processes for detection and elimination of physical or other product hazards. They are often called upon to conduct research to review safety levels for products. They are expected to investigate causes of accidents or illnesses pertaining to product usage in order to evolve solutions to minimize or avoid recurrence. Finally, product safety engineers report accident investigation findings.

Every day, product safety engineers are expected to be able to evaluate problems as they arise. It is also important that they listen to and understand others in meetings.

And finally, they sometimes have to recommend processes for detection and elimination of physical or other product hazards.

Like many other jobs, product safety engineers must have exceptional integrity and be thorough and dependable.

Similar jobs with educational opportunities in El Paso include:

  • Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
  • Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
  • Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
  • Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
  • Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
  • Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
  • Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
  • Industrial Engineer. Design, develop, and evaluate integrated systems for managing industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
  • Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
  • Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
  • Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.

EDUCATIONAL OPPORTUNITIES: Product Safety Engineer Training

The University of Texas at El Paso - El Paso, TX

The University of Texas at El Paso, 500 W. University Ave, El Paso, TX 79968-0691. The University of Texas at El Paso is a large university located in El Paso, Texas. It is a public school with primarily 4-year or above programs. It has 20,458 students and an admission rate of 99%. The University of Texas at El Paso has a master's degree and a doctor's degree program in Environmental/Environmental Health Engineering which graduated four and four students respectively in 2008.

New Mexico State University-Main Campus - Las Cruces, NM

New Mexico State University-Main Campus, 2850 Weddell Street, Las Cruces, NM 88003-8001. New Mexico State University-Main Campus is a large university located in Las Cruces, New Mexico. It is a public school with primarily 4-year or above programs. It has 17,198 students and an admission rate of 61%. New Mexico State University-Main Campus has a master's degree program in Environmental/Environmental Health Engineering which graduated five students in 2008.

CERTIFICATIONS

Risk Management for Public Entities: Understand the unique nature of the public sector.

For more information, see the American Institute for CPCU and Insurance Institute of America website.

Certified Energy Manager: Since its inception in 1981, the Certified Energy Manager (CEM®) credential has become widely accepted and used as a measure of professional accomplishment within the energy management field.

For more information, see the Association of Energy Engineers website.

Certified Water Technologist: The Certified Water Technologist (CWT) program represents the highest professional credential in the industrial and commercial water treatment field.

For more information, see the Association of Water Technologies website.

Certified Professional Ergonomist: The BCPE was established to provide a formal process for recognizing practitioners of human factors/ergonomics.

For more information, see the Board of Certification in Professional Ergonomics website.

Certified Environmental Health Technician: CEHT is for individuals who are interested in field intensive environmental health activities--such as testing, sampling, and inspections, and who are required to provide information on safe environmental health practices and to eliminate environmental health hazards.

For more information, see the National Environmental Health Association website.

Inspection and Testing of Water-Based Systems: This certification program was designed for engineering technicians in the automatic fire sprinkler industry who are engaged in the physical and mechanical aspects of inspection, testing, and maintenance of water-based systems including foam and foam-water systems.

For more information, see the National Institute for Certification in Engineering Technologies website.

Registered Radiation Protection Technologist: A Radiation Protection Technologist is a person engaged in providing radiation protection to the radiation worker, the general public, and the environment from the effects of ionizing radiation.

For more information, see the National Registry of Radiation Protection Technologists website.

Municipal Solid Waste Management Systems - Technical Associate: By earning this certification, you will demonstrate knowledge and proficiency that only the top in a field can show.

For more information, see the Solid Waste Association of North America website.

Bioreactor Landfill - Technical Associate: By earning this certification, you will demonstrate knowledge and proficiency in this new technology.

For more information, see the Solid Waste Association of North America website.

LOCATION INFORMATION: El Paso, Texas

El Paso, Texas
El Paso, Texas photo by Camerafiend

El Paso is situated in El Paso County, Texas. It has a population of over 613,190, which has grown by 8.8% over the last ten years. The cost of living index in El Paso, 80, is well below the national average. New single-family homes in El Paso are priced at $150,600 on average, which is well below the state average. In 2008, 2,521 new homes were built in El Paso, down from 2,666 the previous year.

The three big industries for women in El Paso are educational services, health care, and accommodation and food services. For men, it is construction, educational services, and public administration. The average travel time to work is about 22 minutes. More than 18.3% of El Paso residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.2%, is lower than the state average.

The unemployment rate in El Paso is 8.7%, which is greater than Texas's average of 8.1%.

The percentage of El Paso residents that are affiliated with a religious congregation, 63.4%, is more than both the national and state average. Pentecostal Holiness Church, El Divino Redentor United Methodist Church and El Paso Catholic Church are some of the churches located in El Paso. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

El Paso is home to the Wyler Aerial Tramway and the Old Fort Bliss as well as Travis White Park and Feather Lake Wildlife Refuge. Shopping centers in the area include Las Palmas Shopping Center, NorthPark Shopping Center and Cielo Vista Shopping Center. Visitors to El Paso can choose from Holiday Inn El Paso, Best Western Airport Inn and Allstate Motel for temporary stays in the area.