Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Brownsville, Texas

There is a wide variety of career and education opportunities for structural and ornamental metalwork metal fabricators in the Brownsville, Texas area. Currently, 12,740 people work as structural and ornamental metalwork metal fabricators in Texas. This is expected to grow by 15% to about 14,690 people by 2016. This is better than the nation as a whole, where employment opportunities for structural and ornamental metalwork metal fabricators are expected to shrink by about 0.4%. Structural and ornamental metalwork metal fabricators generally fabricate, lay out, and fit parts of structural metal products.

A person working as a structural and ornamental metalwork metal fabricator can expect to earn about $13 per hour or $29,040 annually on average in Texas and about $15 hourly or $32,400 annually on average in the U.S. as a whole. Compared with people working in the overall category of Assembling and Fabrication, people working as structural and ornamental metalwork metal fabricators in Texas earn more. They earn more than people working in the overall category of Assembling and Fabrication nationally.

The Brownsville area is home to ten schools of higher education, including one within twenty-five miles of Brownsville where you can get a degree as a structural and ornamental metalwork metal fabricator. The most common level of education for structural and ornamental metalwork metal fabricators is a high school diploma or GED. You can expect to spend only a short time training to become a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Brownsville include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Electromechanical Equipment Assembler. Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.
  • Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

Texas Southmost College - Brownsville, TX

Texas Southmost College, 80 Fort Brown, Brownsville, TX 78520. Texas Southmost College is a large college located in Brownsville, Texas. It is a public school with primarily 2-year programs. Texas Southmost College has a one to two year program in Machine Shop Technology/Assistant.

LOCATION INFORMATION: Brownsville, Texas

Brownsville, Texas
Brownsville, Texas photo by Jaedza

Brownsville is situated in Cameron County, Texas. It has a population of over 175,494, which has grown by 25.6% over the last ten years. The cost of living index in Brownsville, 78, is well below the national average. New single-family homes in Brownsville cost $102,100 on average, which is far less than the state average. In 2008, four hundred sixty-four new homes were constructed in Brownsville, down from eight hundred sixty-one the previous year.

The top three industries for women in Brownsville are educational services, health care, and accommodation and food services. For men, it is construction, educational services, and accommodation and food services. The average commute to work is about 20 minutes. More than 13.4% of Brownsville residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 5.1%, is lower than the state average.

The unemployment rate in Brownsville is 10.8%, which is greater than Texas's average of 8.1%.

The percentage of Brownsville residents that are affiliated with a religious congregation, 52.8%, is more than the national average but less than the state average. El Calvario Lutheran Church, Primera Iglesia Presbiteriana Mexicana Church and Church of Christ are some of the churches located in Brownsville. The most prominent religious groups are the Catholic Church, the Southern Baptist Convention and the United Methodist Church.

Brownsville is home to the Resaca de la Palma Battlefield and the Miguel Fernandez Hide Yard as well as Friendship Gardens and Washington Park. Visitors to Brownsville can choose from Best Western Rose Garden Inn, Comfort Inn and Best Value Colonial Hotel for temporary stays in the area.