Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Numerical Control Tool Programmers in Arlington, Texas

Many educational and employment opportunities exist for numerical control tool programmers in the Arlington, Texas area. There are currently 1,030 working numerical control tool programmers in Texas; this should grow by 18% to 1,220 working numerical control tool programmers in the state by 2016. This is better than the national trend for numerical control tool programmers, which sees this job pool shrinking by about 15.4% over the next eight years. In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.

A person working as a numerical control tool programmer can expect to earn about $20 per hour or $42,700 yearly on average in Texas and about $21 hourly or $44,310 per year on average in the U.S. as a whole. Incomes for numerical control tool programmers are better than in the overall category of Computer Controls in Texas, and better than the overall Computer Controls category nationally.

There are eleven schools within twenty-five miles of Arlington where you can study to be a numerical control tool programmer, among eighty-seven schools of higher education total in the Arlington area. The most common level of education for numerical control tool programmers is an Associate's, or other 2-year degree. You can expect to spend about two years studying to be a numerical control tool programmer if you already have a high school diploma.

CAREER DESCRIPTION: Numerical Control Tool Programmer

Numerical Control Tool Programmer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, numerical control tool programmers develop programs to control machining or processing of parts by automatic machine tools, equipment, or systems.

Numerical control tool programmers analyze job orders, drawings, blueprints, specifications, printed circuit board pattern films, and layout data so as to calculate dimensions and feed rates. They also decide on the sequence of machine operations, and decide on the proper cutting tools needed to machine workpieces into the desired shapes. Equally important, numerical control tool programmers have to modify existing programs to enhance efficiency. They are often called upon to decide on reference points, machine cutting paths, or hole locations, and compute angular and linear dimensions, radii, and curvatures. They are expected to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications. Finally, numerical control tool programmers revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved.

Every day, numerical control tool programmers are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they imediately see the relationships between collections of numbers, images, and patterns.

It is important for numerical control tool programmers to enter computer commands to store or retrieve components patterns or programs that transfer data to other media. They are often called upon to ready geometric layouts from graphic displays, using computer-assisted drafting software or drafting instruments and graph paper. They also compare encoded tapes or computer printouts with original part specifications and blueprints to confirm precision of instructions. They are sometimes expected to enter coordinates of hole locations into program memories by depressing pedals or buttons of programmers. Somewhat less frequently, numerical control tool programmers are also expected to write instruction sheets and cutter lists for a machine's controller so as to guide setup and encode numerical control tapes.

Numerical control tool programmers sometimes are asked to draw machine tool paths on pattern film, using colored markers and following guidelines for tool speed and efficiency. and revise programs and/or tapes to remove errors, and retest programs to check that problems have been solved. And finally, they sometimes have to observe machines on trial runs or conduct computer simulations to insure that programs and machinery will function properly and produce items that meet specifications.

Like many other jobs, numerical control tool programmers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.

EDUCATIONAL OPPORTUNITIES: Numerical Control Tool Programmer Training

Westwood College-Ft Worth - Fort Worth, TX

Westwood College-Ft Worth, 4232 North Freeway, Fort Worth, TX 76137. Westwood College-Ft Worth is a small college located in Fort Worth, Texas. It is a private for-profit school with primarily 2-year programs. It has 370 students and an admission rate of 58%. Westwood College-Ft Worth has an associate's degree program in Computer Programming/Programmer.

Brookhaven College - Farmers Branch, TX

Brookhaven College, 3939 Valley View Ln, Farmers Branch, TX 75244-4997. Brookhaven College is a large college located in Farmers Branch, Texas. It is a public school with primarily 2-year programs and has 11,173 students. Brookhaven College has 2 areas of study related to Numerical Control Tool Programmer. They are:

  • Computer Programming/Programmer, one to two year and associate's degree which graduated one and four students respectively in 2008.
  • Data Processing and Data Processing Technology/Technician, one to two year and associate's degree which graduated six and one students respectively in 2008.

El Centro College - Dallas, TX

El Centro College, 801 Main, Dallas, TX 75202-3604. El Centro College is a medium sized college located in Dallas, Texas. It is a public school with primarily 2-year programs and has 8,114 students. El Centro College has 2 areas of study related to Numerical Control Tool Programmer. They are:

  • Computer Programming/Programmer, one to two year and associate's degree which graduated two and four students respectively in 2008.
  • Data Processing and Data Processing Technology/Technician, one to two year and associate's degree which graduated five and one students respectively in 2008.

Westwood College-Dallas - Dallas, TX

Westwood College-Dallas, 8390 LBJ Frwy, Exec Center 1-Ste 100, Dallas, TX 75243. Westwood College-Dallas is a small college located in Dallas, Texas. It is a private for-profit school with primarily 2-year programs. It has 504 students and an admission rate of 48%. Westwood College-Dallas has an associate's degree program in Computer Programming/Programmer.

Interactive Learning Systems - Dallas, TX

Interactive Learning Systems, 8585 No. Stemmons Fwy . Suite C-15, Dallas, TX 75247. Interactive Learning Systems is a small school located in Dallas, Texas. It is a private for-profit school with primarily less-than 2-year programs and has 27 students. Interactive Learning Systems has a one to two year program in Computer Programming/Programmer.

Mountain View College - Dallas, TX

Mountain View College, 4849 W Illinois, Dallas, TX 75211-6599. Mountain View College is a medium sized college located in Dallas, Texas. It is a public school with primarily 2-year programs and has 7,126 students. Mountain View College has 2 areas of study related to Numerical Control Tool Programmer. They are:

  • Computer Programming/Programmer, one to two year and associate's degree.
  • Data Processing and Data Processing Technology/Technician, one to two year and associate's degree which graduated three and zero students respectively in 2008.

Tarrant County College District - Fort Worth, TX

Tarrant County College District, 1500 Houston St, Fort Worth, TX 76102-6599. Tarrant County College District is a large college located in Fort Worth, Texas. It is a public school with primarily 2-year programs and has 39,596 students. Tarrant County College District has a less than one year and an associate's degree program in Computer Programming/Programmer which graduated four and eight students respectively in 2008.

Richland College - Dallas, TX

Richland College, 12800 Abrams Rd, Dallas, TX 75243-2199. Richland College is a large college located in Dallas, Texas. It is a public school with primarily 2-year programs and has 15,917 students. Richland College has 2 areas of study related to Numerical Control Tool Programmer. They are:

  • Computer Programming/Programmer, one to two year and associate's degree which graduated five and six students respectively in 2008.
  • Data Processing and Data Processing Technology/Technician, one to two year and associate's degree which graduated eight and two students respectively in 2008.

North Lake College - Irving, TX

North Lake College, 5001 N MacArthur Blvd, Irving, TX 75038-3899. North Lake College is a large college located in Irving, Texas. It is a public school with primarily 2-year programs and has 10,174 students. North Lake College has 2 areas of study related to Numerical Control Tool Programmer. They are:

  • Computer Programming/Programmer, one to two year and associate's degree which graduated three and four students respectively in 2008.
  • Data Processing and Data Processing Technology/Technician, one to two year and associate's degree which graduated thirteen and one students respectively in 2008.

Collin County Community College District - Plano, TX

Collin County Community College District, 4800 Preston Park Blvd., Plano, TX 75093. Collin County Community College District is a large college located in Plano, Texas. It is a public school with primarily 2-year programs and has 21,000 students. Collin County Community College District has less than one year, one to two year, and associate's degree programs in Computer Programming/Programmer.

Cedar Valley College - Lancaster, TX

Cedar Valley College, 3030 N Dallas Ave, Lancaster, TX 75134-3799. Cedar Valley College is a medium sized college located in Lancaster, Texas. It is a public school with primarily 2-year programs and has 5,223 students. Cedar Valley College has 2 areas of study related to Numerical Control Tool Programmer. They are:

  • Computer Programming/Programmer, one to two year and associate's degree.
  • Data Processing and Data Processing Technology/Technician, one to two year and associate's degree which graduated five and two students respectively in 2008.

LOCATION INFORMATION: Arlington, Texas

Arlington, Texas
Arlington, Texas photo by Alienevil

Arlington is located in Tarrant County, Texas. It has a population of over 374,417, which has grown by 12.4% in the past ten years. The cost of living index in Arlington, 89, is well below the national average. New single-family homes in Arlington are priced at $154,300 on average, which is well below the state average. In 2008, four hundred twenty-six new homes were constructed in Arlington, down from eight hundred twelve the previous year.

The three most popular industries for women in Arlington are educational services, health care, and finance and insurance. For men, it is construction, accommodation and food services, and administrative and support and waste management services. The average travel time to work is about 27 minutes. More than 30.4% of Arlington residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 8.8%, is higher than the state average.

The unemployment rate in Arlington is 7.5%, which is less than Texas's average of 8.1%.

The percentage of Arlington residents that are affiliated with a religious congregation, 52.5%, is more than the national average but less than the state average. Advent Lutheran Church, Pleasantview Baptist Church and Central Assembly of God Church are some of the churches located in Arlington. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.

Arlington is home to the Festival Marketplace and the The Parks at Arlington as well as Arlington Tennis Center - University of Texas and Doug Russel Park. Visitors to Arlington can choose from Budget Host International, Baymont Inns & Suites and Candlewood Suites for temporary stays in the area.