Career and Education Opportunities for Welding Operators in Nashville-Davidson, Tennessee
Welding operator career and educational opportunities abound in Nashville-Davidson, Tennessee. There are currently 2,020 working welding operators in Tennessee; this should grow 25% to about 2,530 working welding operators in the state by 2016. This is better than the nation as a whole, where employment opportunities for welding operators are expected to shrink by about 7.0%. In general, welding operators set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
Welding operators earn approximately $13 per hour or $27,740 per year on average in Tennessee. Nationally they average about $15 hourly or $31,610 annually. Earnings for welding operators are not quite as good as earnings in the general category of Foundry and Metal Work in Tennessee and not quite as good as general Foundry and Metal Work category earnings nationally.
There are fifty schools of higher education in the Nashville-Davidson area, including two within twenty-five miles of Nashville-Davidson where you can get a degree to start your career as a welding operator. Given that the most common education level for welding operators is a high school diploma or GED, it will take only a short time to learn to be a welding operator if you already have a high school diploma.
CAREER DESCRIPTION: Welding Operator
In general, welding operators set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
Every day, welding operators are expected to be able to articulate ideas and problems. They need to see details at a very fine level of focus. It is also important that they move quickly in order to hold onto or control objects and devices.
It is important for welding operators to give directions to other staff regarding machine set-up and use. They are often called upon to prepare and tend welding machines that join or bond components to fabricate metal products or assemblies. They also load or feed workpieces into welding machines to join or bond components. They are sometimes expected to correct problems by adjusting controls or by stopping machines and opening holding devices. Somewhat less frequently, welding operators are also expected to read blueprints and production schedules to establish product or job instructions and specifications.
Welding operators sometimes are asked to observe meters and machine operations to insure that soldering or brazing processes meet specifications. They also have to be able to tend auxiliary equipment used in welding processes And finally, they sometimes have to prepare and tend welding machines that join or bond components to fabricate metal products or assemblies.
Like many other jobs, welding operators must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Nashville-Davidson include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
EDUCATIONAL OPPORTUNITIES: Welding Operator Training
Miller-Motte Technical College-Goodlettsville - Goodlettsville, TN
Miller-Motte Technical College-Goodlettsville, 801 Space Park North, Goodlettsville, TN 37072. Miller-Motte Technical College-Goodlettsville is a small college located in Goodlettsville, Tennessee. It is a private for-profit school with primarily 2-year programs. It has 178 students and an admission rate of 61%. Miller-Motte Technical College-Goodlettsville has a one to two year and an associate's degree program in Welding Technology/Welder which graduated ten and zero students respectively in 2008.
Tennessee Technology Center at Nashville - Nashville, TN
Tennessee Technology Center at Nashville, 100 White Bridge Rd, Nashville, TN 37209-4515. Tennessee Technology Center at Nashville is a small school located in Nashville, Tennessee. It is a public school with primarily 2-year programs and has 713 students. Tennessee Technology Center at Nashville has a less than one year and a one to two year program in Welding Technology/Welder which graduated six and thirteen students respectively in 2008.
LOCATION INFORMATION: Nashville-Davidson, Tennessee
Nashville-Davidson is located in Williamson County, Tennessee. It has a population of over 596,462, which has grown by 9.3% over the last ten years. The cost of living index in Nashville-Davidson, 86, is well below the national average. New single-family homes in Nashville-Davidson are priced at $196,100 on average, which is well above the state average. In 2008, 1,483 new homes were constructed in Nashville-Davidson, down from 3,070 the previous year.
The three big industries for women in Nashville-Davidson are health care, educational services, and accommodation and food services. For men, it is construction, health care, and professional, scientific, and technical services. The average travel time to work is about 23 minutes. More than 29.7% of Nashville-Davidson residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.0%, is higher than the state average.
The percentage of Nashville-Davidson residents that are affiliated with a religious congregation, 55.2%, is more than both the national and state average. The most common religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.