Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Structural and Ornamental Metalwork Metal Fabricators in Clarksville, Tennessee

There are many career and education opportunities for structural and ornamental metalwork metal fabricators in the Clarksville, Tennessee area. There are currently 2,660 working structural and ornamental metalwork metal fabricators in Tennessee; this should grow 16% to about 3,080 working structural and ornamental metalwork metal fabricators in the state by 2016. This is better than the national trend for structural and ornamental metalwork metal fabricators, which sees this job pool shrinking by about 0.4% over the next eight years. In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators earn about $15 hourly or $33,090 yearly on average in Tennessee and about $15 hourly or $32,400 yearly on average nationally. Earnings for structural and ornamental metalwork metal fabricators are better than earnings in the general category of Assembling and Fabrication in Tennessee and better than general Assembling and Fabrication category earnings nationally.

The Clarksville area is home to twelve schools of higher education, including two within twenty-five miles of Clarksville where you can get a degree as a structural and ornamental metalwork metal fabricator. The most common level of education for structural and ornamental metalwork metal fabricators is a high school diploma or GED. You can expect to spend only a short time training to become a structural and ornamental metalwork metal fabricator if you already have a high school diploma.

CAREER DESCRIPTION: Structural and Ornamental Metalwork Metal Fabricator

Structural and Ornamental Metalwork Metal Fabricator video from the State of New Jersey Dept. of Labor and Workforce Development

In general, structural and ornamental metalwork metal fabricators fabricate, lay out, and fit parts of structural metal products.

Structural and ornamental metalwork metal fabricators position and weld components to fashion complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools. They also move components into position, manually or with hoists or cranes. Equally important, structural and ornamental metalwork metal fabricators have to lay out and examine metal stock or workpieces to be processed to insure that specifications are met. They are often called upon to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes. They are expected to tack-weld fitted components together. Finally, structural and ornamental metalwork metal fabricators smooth workpiece edges and fix taps, tubes, and valves.

Every day, structural and ornamental metalwork metal fabricators are expected to be able to visualize how things come together and can be organized. They need to see details at a very fine level of focus. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for structural and ornamental metalwork metal fabricators to straighten warped or bent components, using sledges or bulldozers. They are often called upon to direct welders to build up low spots or short pieces with weld. They also align and fit components according to given requirements, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers. They are sometimes expected to layout and construct templates and fixtures, using hand tools. Somewhat less frequently, structural and ornamental metalwork metal fabricators are also expected to heat-treat components, using acetylene torches.

Structural and ornamental metalwork metal fabricators sometimes are asked to hammer and grind workpieces to cut and straighten metal. And finally, they sometimes have to verify conformance of workpieces to given requirements, using squares, rulers, and measuring tapes.

Like many other jobs, structural and ornamental metalwork metal fabricators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Clarksville include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Electromechanical Equipment Assembler. Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

EDUCATIONAL OPPORTUNITIES: Structural and Ornamental Metalwork Metal Fabricator Training

Tennessee Technology Center at Dickson - Dickson, TN

Tennessee Technology Center at Dickson, 740 Hwy 46, Dickson, TN 37055. Tennessee Technology Center at Dickson is a small school located in Dickson, Tennessee. It is a public school with primarily 2-year programs and has 435 students. Tennessee Technology Center at Dickson has less than one year, one to two year, and two to four year programs in Machine Shop Technology/Assistant which graduated one, seven, and zero students respectively in 2008.

Tennessee Technology Center at Nashville - Nashville, TN

Tennessee Technology Center at Nashville, 100 White Bridge Rd, Nashville, TN 37209-4515. Tennessee Technology Center at Nashville is a small school located in Nashville, Tennessee. It is a public school with primarily 2-year programs and has 713 students. Tennessee Technology Center at Nashville has a less than one year and a two to four year program in Machine Shop Technology/Assistant which graduated nine and seven students respectively in 2008.

LOCATION INFORMATION: Clarksville, Tennessee

Clarksville, Tennessee
Clarksville, Tennessee photo by Avala

Clarksville is situated in Montgomery County, Tennessee. It has a population of over 119,735, which has grown by 15.7% in the past ten years. The cost of living index in Clarksville, 82, is well below the national average. New single-family homes in Clarksville cost $97,300 on average, which is well below the state average. In 2008, six hundred thirty-five new homes were built in Clarksville, down from 1,038 the previous year.

The top three industries for women in Clarksville are health care, educational services, and accommodation and food services. For men, it is construction, public administration, and accommodation and food services. The average commute to work is about 24 minutes. More than 19.8% of Clarksville residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.8%, is lower than the state average.

The unemployment rate in Clarksville is 8.8%, which is less than Tennessee's average of 10.2%.

The percentage of Clarksville residents that are affiliated with a religious congregation, 45.3%, is less than both the national and state average. Spring Creek Church, South Chapel and Saint John Baptist Church are among the churches located in Clarksville. The most common religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.

Clarksville is home to the Industrial Historic District and the Trice Landing as well as Fairgrounds Park and New Providence Recreation Area. Shopping malls in the area include Governors Square Mall Shopping Center, Clarksville Square Shopping Center and Two Rivers Mall Shopping Center. Visitors to Clarksville can choose from Comfort Inn North, Hampton Inn Clarksville and Guesthouse Clarksville for temporary stays in the area.