Career and Education Opportunities for Heat Treating Equipment Operators in Columbia, South Carolina
There are many career and education opportunities for heat treating equipment operators in the Columbia, South Carolina area. The national trend for heat treating equipment operators sees this job pool shrinking by about 10.6% over the next eight years. In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
A person working as a heat treating equipment operator can expect to earn about $16 per hour or $33,680 yearly on average in South Carolina and about $15 hourly or $32,030 per year on average in the U.S. as a whole. Incomes for heat treating equipment operators are better than in the overall category of Foundry and Metal Work in South Carolina, and not quite as good as the overall Foundry and Metal Work category nationally.
There are twenty schools of higher education in the Columbia area, including two within twenty-five miles of Columbia where you can get a degree to start your career as a heat treating equipment operator. The most common level of education for heat treating equipment operators is a high school diploma or GED. You can expect to spend only a short time training to become a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Columbia include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
Midlands Technical College - West Columbia, SC
Midlands Technical College, 1260 Lexington Drive, West Columbia, SC 29170-2176. Midlands Technical College is a large college located in West Columbia, South Carolina. It is a public school with primarily 2-year programs and has 11,157 students. Midlands Technical College has less than one year, one to two year, and associate's degree programs in Machine Tool Technology/Machinist which graduated eighteen, five, and eight students respectively in 2008.
Orangeburg Calhoun Technical College - Orangeburg, SC
Orangeburg Calhoun Technical College, 3250 Saint Matthews Rd, Orangeburg, SC 29118-8299. Orangeburg Calhoun Technical College is a small college located in Orangeburg, South Carolina. It is a public school with primarily 2-year programs and has 2,605 students. Orangeburg Calhoun Technical College has an associate's degree program in Machine Tool Technology/Machinist which graduated six students in 2008.
LOCATION INFORMATION: Columbia, South Carolina
Columbia is located in Richland County, South Carolina. It has a population of over 127,029, which has grown by 9.2% over the last ten years. The cost of living index in Columbia, 86, is well below the national average. New single-family homes in Columbia cost $142,700 on average, which is well below the state average. In 2008, four hundred thirty-four new homes were built in Columbia, down from seven hundred the previous year.
The three most popular industries for women in Columbia are educational services, health care, and public administration. For men, it is educational services, public administration, and accommodation and food services. The average commute to work is about 18 minutes. More than 35.7% of Columbia residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.3%, is higher than the state average.
The unemployment rate in Columbia is 16.1%, which is greater than South Carolina's average of 12.0%.
The percentage of Columbia residents that are affiliated with a religious congregation, 41.6%, is less than both the national and state average. Progressive Church, Bishop Memorial African Methodist Episcopal Church and Lutheran Seminary are among the churches located in Columbia. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Columbia is home to the Booker T Washington Center and the Longstreet Annex as well as Irwin Park and Columbia Historic District II. Shopping centers in the area include Five Points Shopping Center, Market Place Shopping Center and Columbiana Centre Shopping Center. Visitors to Columbia can choose from Marriott Columbia, Hampton Inn Columbia-SE-Fort Jackson and Embassy Suites Hotel for temporary stays in the area.