Career and Education Opportunities for Chemical Engineers in Columbia, South Carolina
Chemical engineer career and educational opportunities abound in Columbia, South Carolina. About 900 people are currently employed as chemical engineers in South Carolina. By 2016, this is expected to grow by 5% to 950 people employed. This is better than the nation as a whole, where employment opportunities for chemical engineers are expected to shrink by about 2.0%. Chemical engineers generally design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
Income for chemical engineers is about $38 hourly or $79,670 yearly on average in South Carolina. Nationally, their income is about $40 per hour or $84,680 yearly. Incomes for chemical engineers are better than in the overall category of Engineering in South Carolina, and better than the overall Engineering category nationally. Jobs in this field include: fuels engineer, engineering scientist, and polymerization supervisor.
There is one school within twenty-five miles of Columbia where you can study to be a chemical engineer, among twenty schools of higher education total in the Columbia area. Chemical engineers usually hold a Bachelor's degree, so you can expect to spend about four years training to become a chemical engineer if you already have a high school diploma.
CAREER DESCRIPTION: Chemical Engineer
In general, chemical engineers design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
Chemical engineers evaluate chemical equipment and processes to pinpoint ways to optimize performance or to insure adherence to safety and environmental regulations. They also design safety procedures to be employed by staff operating equipment or working in close proximity to on-going chemical reactions. Equally important, chemical engineers have to perform laboratory studies of steps in the manufacture of new products and test proposed processes in small scale operations such as pilot plants. They are often called upon to design processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes. They are expected to design and plan layout of equipment. Finally, chemical engineers perform tests and monitor effectiveness of processes throughout stages of production to establish degree of control over variables such as temperature and pressure.
Every day, chemical engineers are expected to be able to listen to and understand others in meetings. They need to read and understand documents and reports. It is also important that they articulate ideas and problems.
It is important for chemical engineers to layout measurement and control systems for chemical plants on the basis of data collected in laboratory experiments and in pilot plant operations. Somewhat less frequently, chemical engineers are also expected to design safety procedures to be employed by staff operating equipment or working in close proximity to on-going chemical reactions.
Chemical engineers sometimes are asked to decide on most effective arrangement of operations such as mixing and drying. They also have to be able to ready estimates of production costs and production progress summaries for management And finally, they sometimes have to design safety procedures to be employed by staff operating equipment or working in close proximity to on-going chemical reactions.
Like many other jobs, chemical engineers must be able to absorb the factors involved and a problem and provide a well thought out solution and be reliable.
Similar jobs with educational opportunities in Columbia include:
- Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
- Nuclear Engineer. Conduct research on nuclear engineering problems or apply principles and theory of nuclear science to problems concerned with release, control, and utilization of nuclear energy and nuclear waste disposal.
EDUCATIONAL OPPORTUNITIES: Chemical Engineer Training
University of South Carolina-Columbia - Columbia, SC
University of South Carolina-Columbia, , Columbia, SC 29208. University of South Carolina-Columbia is a large university located in Columbia, South Carolina. It is a public school with primarily 4-year or above programs. It has 27,500 students and an admission rate of 59%. University of South Carolina-Columbia has bachelor's degree, master's degree, and doctor's degree programs in Chemical Engineering which graduated twenty-four, five, and twelve students respectively in 2008.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified Water Technologist: The Certified Water Technologist (CWT) program represents the highest professional credential in the industrial and commercial water treatment field.
For more information, see the Association of Water Technologies website.
LOCATION INFORMATION: Columbia, South Carolina
Columbia is located in Richland County, South Carolina. It has a population of over 127,029, which has grown by 9.2% over the last ten years. The cost of living index in Columbia, 86, is well below the national average. New single-family homes in Columbia cost $142,700 on average, which is well below the state average. In 2008, four hundred thirty-four new homes were built in Columbia, down from seven hundred the previous year.
The three most popular industries for women in Columbia are educational services, health care, and public administration. For men, it is educational services, public administration, and accommodation and food services. The average commute to work is about 18 minutes. More than 35.7% of Columbia residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.3%, is higher than the state average.
The unemployment rate in Columbia is 16.1%, which is greater than South Carolina's average of 12.0%.
The percentage of Columbia residents that are affiliated with a religious congregation, 41.6%, is less than both the national and state average. Progressive Church, Bishop Memorial African Methodist Episcopal Church and Lutheran Seminary are among the churches located in Columbia. The largest religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Columbia is home to the Booker T Washington Center and the Longstreet Annex as well as Irwin Park and Columbia Historic District II. Shopping centers in the area include Five Points Shopping Center, Market Place Shopping Center and Columbiana Centre Shopping Center. Visitors to Columbia can choose from Marriott Columbia, Hampton Inn Columbia-SE-Fort Jackson and Embassy Suites Hotel for temporary stays in the area.