Career and Education Opportunities for Welders in Charleston, South Carolina
If you want to be a welder, the Charleston, South Carolina area offers many opportunities both for education and employment. Currently, 6,620 people work as welders in South Carolina. This is expected to grow by 16% to about 7,690 people by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. Welders generally use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn about $15 hourly or $32,620 yearly on average in South Carolina and about $16 hourly or $33,560 per year on average nationally. Incomes for welders are not quite as good as in the overall category of Foundry and Metal Work in South Carolina, and better than the overall Foundry and Metal Work category nationally.
The Charleston area is home to fourteen schools of higher education, including one within twenty-five miles of Charleston where you can get a degree as a welder. Given that the most common education level for welders is less than a high school diploma, you can expect to spend only a short time training to become a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Charleston include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Trident Technical College - Charleston, SC
Trident Technical College, 7000 Rivers Avenue, Charleston, SC 29423-8067. Trident Technical College is a large college located in Charleston, South Carolina. It is a public school with primarily 2-year programs and has 12,758 students. Trident Technical College has a less than one year program in Welding Technology/Welder which graduated ten students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Charleston, South Carolina
Charleston is situated in Charleston County, South Carolina. It has a population of over 111,978, which has grown by 15.9% over the last ten years. The cost of living index in Charleston, 94, is below the national average. New single-family homes in Charleston cost $157,600 on average, which is below the state average. In 2008, five hundred eight new homes were built in Charleston, down from eight hundred seventy-eight the previous year.
The top three industries for women in Charleston are health care, educational services, and accommodation and food services. For men, it is accommodation and food services, construction, and professional, scientific, and technical services. The average commute to work is about 20 minutes. More than 37.5% of Charleston residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.9%, is higher than the state average.
The unemployment rate in Charleston is 10.5%, which is less than South Carolina's average of 12.0%.
The percentage of Charleston residents that are affiliated with a religious congregation, 42.7%, is less than both the national and state average. Plymouth Congregational Church, Lutheran Church of the Redeemer and Holy Trinity Episcopal Church are among the churches located in Charleston. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Charleston is home to the United State Department of Agriculture and the The Center as well as Harmon Field and Stoney Field. Shopping malls in the area include Church Creek Plaza Shopping Center, Citadel Mall Shopping Center and South Windermere Shopping Center. Visitors to Charleston can choose from French Quarter Inn, Fulton Lane Inn and Budget Inn for temporary stays in the area.