Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Plumbers in Warwick, Rhode Island

If you want to be a plumber, the Warwick, Rhode Island area offers many opportunities both for education and employment. There are currently 2,420 working plumbers in Rhode Island; this should grow 10% to 2,670 working plumbers in the state by 2016. This is not quite as good as the national trend for plumbers, which sees this job pool growing by about 15.3% over the next eight years. In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

Income for plumbers is about $25 per hour or $53,790 yearly on average in Rhode Island. Nationally, their income is about $21 per hour or $45,640 annually. Incomes for plumbers are better than in the overall category of Plumbing in Rhode Island, and better than the overall Plumbing category nationally.

There are fifty-one schools of higher education in the Warwick area, including one within twenty-five miles of Warwick where you can get a degree to start your career as a plumber. Given that the most common education level for plumbers is a high school diploma or GED, you can expect to spend only a short time studying to be a plumber if you already have a high school diploma.

CAREER DESCRIPTION: Plumber

Plumber video from the State of New Jersey Dept. of Labor and Workforce Development

In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

Plumbers assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment. They also set up pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools. Equally important, plumbers have to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools. They are often called upon to fill pipes or plumbing fixtures with water or air and observe pressure gauges to uncover and locate leaks. They are expected to measure and bend pipe to required angles, using hand and power tools or machines such as pipe cutters, pipe-threading machines, and pipe-bending machines. Finally, plumbers study building plans and inspect structures to gauge material and equipment needs, to determine the sequence of pipe installations, and to develop installation around obstructions such as electrical wiring.

Every day, plumbers are expected to be able to twist and stretch their arms and legs to get work done. They need to control and manipulate objects at a fine level of detail. It is also important that they control objects and devices with precise control.

It is important for plumbers to keep records of assignments and produce detailed work reports. They are often called upon to clear away debris in a renovation. They also perform complex calculations and planning for special or very large jobs. They are sometimes expected to ready written work cost estimates and negotiate contracts. Somewhat less frequently, plumbers are also expected to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools.

Plumbers sometimes are asked to locate and mark the position of pipe installations and fixtures in structures, using measuring instruments such as rulers and levels. They also have to be able to direct staff working on pipe cutting and preassembly and placement of plumbing systems and components and set up underground storm, sanitary and water piping systems and extend piping to connect fixtures and plumbing to these systems. And finally, they sometimes have to set up oxygen and medical gas in hospitals.

Like many other jobs, plumbers must be reliable and be thorough and dependable.

EDUCATIONAL OPPORTUNITIES: Plumber Training

New England Institute of Technology - Warwick, RI

New England Institute of Technology, 2500 Post Rd, Warwick, RI 02886-2244. New England Institute of Technology is a small school located in Warwick, Rhode Island. It is a private not-for-profit school with primarily 4-year or above programs and has 2,655 students. New England Institute of Technology has a one to two year and an associate's degree program in Plumbing Technology/Plumber which graduated two and twenty-five students respectively in 2008.

CERTIFICATIONS

Standard Journeyman Plumber: The International Code Council's National Contractor Trades Examination Program is an independent testing program designed to provide licensing agencies with information regarding.

For more information, see the International Code Council website.

Standard Residential Plumber: The International Code Council's National Contractor Trades Examination Program is an.

For more information, see the International Code Council website.

Journeyman Plumber: This certification is designed to test the knowledge that a journey level plumber has of the Uniform Plumbing Code published by the International Association of Plumbing and Mechanical Officials (IAPMO).

For more information, see the National Inspection, Testing and Certification Corporation website.

Journeyman Pipefitter-Steamfitter: The NITC journey level pipefitting/steamfitting certification is based on a written examination that consists of 100 multiple choice questions.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Installer 6010: This examination is covered under NITC's scope of accreditation by the American Standards Institute (ANSI).

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Specialist 6005: Candidates shall have successfully completed twenty-four (24) hours of training covering all facets of piped medical gas and medical-surgical vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Maintenance Personnel 6040: Candidates must have completed thirty-two (32) hours of training in the maintenance of medical gas/vacuum systems, and have a minimum of one (1) year experience in the maintenance of medical gas/vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Bulk Medical Gas Systems Installer 6015: Certification to this standard shall be through a method approved by the firm's Quality Control Unit (QCU).

For more information, see the National Inspection, Testing and Certification Corporation website.

IAPMO Mechanical Inspector: IAPMO's National Personnel Certification Program for Inspectors, Plans Examiners and Code Administrators is a nationally recognized, comprehensive testing and certification program that assesses the knowledge of construction codes as an indicator of competence and professionalism.

For more information, see the National Inspection, Testing and Certification Corporation website.

Automatic Sprinkler System Layout: This certification program is for engineering technicians engaged in the layout and detailing of automatic sprinkler systems which must meet existing and proposed code and statutory requirements.

For more information, see the National Institute for Certification in Engineering Technologies website.

LICENSES

Irrigator

Licensing agency: Professional Regulations Division
Address: R.I. Department of Labor and Training, 1511 Pontiac Avenue, Cranston, RI 02920

Phone: (401) 462-8580
Website: Professional Regulations Division R.I. Department of Labor and Training

Plumber

Licensing agency: Professional Regulations Division
Address: R.I. Department of Labor and Training, 1511 Pontiac Avenue, Cranston, RI 02920

Phone: (401) 462-8580
Website: Professional Regulations Division R.I. Department of Labor and Training

LOCATION INFORMATION: Warwick, Rhode Island

Warwick, Rhode Island
Warwick, Rhode Island photo by Marcbela

Warwick is located in Kent County, Rhode Island. It has a population of over 84,483, which has shrunk by 1.5% over the last ten years. The cost of living index in Warwick, 94, is below the national average. New single-family homes in Warwick are priced at $129,500 on average, which is far less than the state average. In 2008, thirty new homes were constructed in Warwick, down from forty-nine the previous year.

The three most popular industries for women in Warwick are health care, educational services, and finance and insurance. For men, it is construction, accommodation and food services, and public administration. The average travel time to work is about 22 minutes. More than 24.5% of Warwick residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 7.9%, is lower than the state average.

The unemployment rate in Warwick is 11.5%, which is less than Rhode Island's average of 12.2%.

The percentage of Warwick residents that are affiliated with a religious congregation, 67.1%, is more than both the national and state average. Warwick Bible Chapel, Warwick Central Baptist Church and Warwick Christian Fellowship Church are all churches located in Warwick. The largest religious groups are the Catholic Church, the Episcopal Church and the Evangelical Lutheran Church in America.

Warwick is home to the Kent County Chamber of Commerce and the Community College of Rhode Island Learning Resources Center as well as Apponaug Historic District and Salter Grove State Park. Shopping malls in the area include Buttonwoods Plaza Shopping Center, Buttonwoods Shopping Center and Clocktower Square Shopping Center. Visitors to Warwick can choose from Fairfield Inn Providence/Warwick, Extended Stay America and Courtyard by Marriott for temporary stays in the area.