Career and Education Opportunities for Heat Treating Equipment Operators in Portland, Oregon
Portland, Oregon provides a wide variety of opportunities, both career and educational, for heat treating equipment operators. There are currently 270 working heat treating equipment operators in Oregon; this should grow 8% to about 300 working heat treating equipment operators in the state by 2016. This is better than the nation as a whole, where employment opportunities for heat treating equipment operators are expected to shrink by about 10.6%. Heat treating equipment operators generally set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Heat treating equipment operators earn approximately $17 hourly or $35,870 annually on average in Oregon. Nationally they average about $15 hourly or $32,030 yearly. Compared with people working in the overall category of Foundry and Metal Work, people working as heat treating equipment operators in Oregon earn more. They earn less than people working in the overall category of Foundry and Metal Work nationally.
There are five schools within twenty-five miles of Portland where you can study to be a heat treating equipment operator, among fifty-nine schools of higher education total in the Portland area. The most common level of education for heat treating equipment operators is a high school diploma or GED. It will take only a short time to learn to be a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Portland include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
Mt Hood Community College - Gresham, OR
Mt Hood Community College, 26000 SE Stark St, Gresham, OR 97030. Mt Hood Community College is a medium sized college located in Gresham, Oregon. It is a public school with primarily 2-year programs and has 7,251 students. Mt Hood Community College has 2 areas of study related to Heat Treating Equipment Operator. They are:
- Machine Tool Technology/Machinist, one to two year and associate's degree which graduated zero and seven students respectively in 2008.
- Machine Shop Technology/Assistant, associate's degree.
Portland Community College - Portland, OR
Portland Community College, 12000 SW 49th Avenue, Portland, OR 97219-7132. Portland Community College is a large college located in Portland, Oregon. It is a public school with primarily 2-year programs and has 26,657 students. Portland Community College has 2 areas of study related to Heat Treating Equipment Operator. They are:
- Machine Tool Technology/Machinist, one to two year, associate's degree, and two to four year which graduated four, three, and two students respectively in 2008.
- Machine Shop Technology/Assistant, less than one year.
Clackamas Community College - Oregon City, OR
Clackamas Community College, 19600 Molalla Ave, Oregon City, OR 97045-8980. Clackamas Community College is a medium sized college located in Oregon City, Oregon. It is a public school with primarily 2-year programs and has 6,701 students. Clackamas Community College has a less than one year and a one to two year program in Machine Tool Technology/Machinist.
Chemeketa Community College - Salem, OR
Chemeketa Community College, 4000 Lancaster Dr NE, Salem, OR 97305. Chemeketa Community College is a large college located in Salem, Oregon. It is a public school with primarily 2-year programs and has 7,000 students. Chemeketa Community College has a one to two year program in Machine Shop Technology/Assistant which graduated five students in 2008.
Clark College - Vancouver, WA
Clark College, 1933 Fort Vancouver Way, Vancouver, WA 98663-3598. Clark College is a large college located in Vancouver, Washington. It is a public school with primarily 2-year programs and has 10,378 students. Clark College has an associate's degree program in Machine Tool Technology/Machinist which graduated two students in 2008.
LOCATION INFORMATION: Portland, Oregon
Portland is located in Multnomah County, Oregon. It has a population of over 557,706, which has grown by 5.4% in the past ten years. The cost of living index in Portland, 103, is above the national average. New single-family homes in Portland are priced at $194,700 on average, which is below the state average. In 2008, six hundred forty-eight new homes were constructed in Portland, down from 1,205 the previous year.
The three big industries for women in Portland are health care, educational services, and professional, scientific, and technical services. For men, it is professional, scientific, and technical services, construction, and accommodation and food services. The average commute to work is about 23 minutes. More than 32.6% of Portland residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 11.4%, is higher than the state average.
The unemployment rate in Portland is 10.7%, which is greater than Oregon's average of 10.6%.
The percentage of Portland residents that are affiliated with a religious congregation, 45.7%, is less than the national average but more than the state average. The largest religious groups are the Catholic Church, the Presbyterian Church (USA) and the Charismatic Churches Independent.
Portland is home to the Barnes Yard and the Haig as well as Cottonwood Bay City Park and Wallace City Park. Visitors to Portland can choose from Motel 6, Shilo Inns & Resorts and Comfort Inn Portland for temporary stays in the area.