Career and Education Opportunities for Heat Treating Equipment Operators in Gresham, Oregon
Heat treating equipment operators can find many career and educational opportunities in the Gresham, Oregon area. There are currently 270 working heat treating equipment operators in Oregon; this should grow 8% to 300 working heat treating equipment operators in the state by 2016. This is better than the national trend for heat treating equipment operators, which sees this job pool shrinking by about 10.6% over the next eight years. In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Heat treating equipment operators earn approximately $17 per hour or $35,870 annually on average in Oregon. Nationally they average about $15 per hour or $32,030 per year. Earnings for heat treating equipment operators are better than earnings in the general category of Foundry and Metal Work in Oregon and not quite as good as general Foundry and Metal Work category earnings nationally.
There are four schools within twenty-five miles of Gresham where you can study to be a heat treating equipment operator, among forty-six schools of higher education total in the Gresham area. Given that the most common education level for heat treating equipment operators is a high school diploma or GED, you can expect to spend only a short time training to become a heat treating equipment operator if you already have a high school diploma.
CAREER DESCRIPTION: Heat Treating Equipment Operator
In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.
It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.
Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.
Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Gresham include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training
Mt Hood Community College - Gresham, OR
Mt Hood Community College, 26000 SE Stark St, Gresham, OR 97030. Mt Hood Community College is a medium sized college located in Gresham, Oregon. It is a public school with primarily 2-year programs and has 7,251 students. Mt Hood Community College has 2 areas of study related to Heat Treating Equipment Operator. They are:
- Machine Tool Technology/Machinist, one to two year and associate's degree which graduated zero and seven students respectively in 2008.
- Machine Shop Technology/Assistant, associate's degree.
Portland Community College - Portland, OR
Portland Community College, 12000 SW 49th Avenue, Portland, OR 97219-7132. Portland Community College is a large college located in Portland, Oregon. It is a public school with primarily 2-year programs and has 26,657 students. Portland Community College has 2 areas of study related to Heat Treating Equipment Operator. They are:
- Machine Tool Technology/Machinist, one to two year, associate's degree, and two to four year which graduated four, three, and two students respectively in 2008.
- Machine Shop Technology/Assistant, less than one year.
Clackamas Community College - Oregon City, OR
Clackamas Community College, 19600 Molalla Ave, Oregon City, OR 97045-8980. Clackamas Community College is a medium sized college located in Oregon City, Oregon. It is a public school with primarily 2-year programs and has 6,701 students. Clackamas Community College has a less than one year and a one to two year program in Machine Tool Technology/Machinist.
Clark College - Vancouver, WA
Clark College, 1933 Fort Vancouver Way, Vancouver, WA 98663-3598. Clark College is a large college located in Vancouver, Washington. It is a public school with primarily 2-year programs and has 10,378 students. Clark College has an associate's degree program in Machine Tool Technology/Machinist which graduated two students in 2008.
LOCATION INFORMATION: Gresham, Oregon
Gresham is situated in Multnomah County, Oregon. It has a population of over 101,221, which has grown by 12.2% over the last ten years. The cost of living index in Gresham, 100, is near the national average. New single-family homes in Gresham cost $219,200 on average, which is above the state average. In 2008, one hundred three new homes were built in Gresham, down from three hundred five the previous year.
The top three industries for women in Gresham are health care, accommodation and food services, and educational services. For men, it is construction, accommodation and food services, and administrative and support and waste management services. The average travel time to work is about 27 minutes. More than 18.4% of Gresham residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 4.9%, is lower than the state average.
The unemployment rate in Gresham is 10.8%, which is greater than Oregon's average of 10.6%.
The percentage of Gresham residents that are affiliated with a religious congregation, 45.7%, is less than the national average but more than the state average. The largest religious groups are the Catholic Church, the Presbyterian Church (USA) and the Charismatic Churches Independent.
Gresham is home to the Linnemann and the Ruby Junction Maintenance Facility-Portland Light Rail System as well as Kane City Park and Davis City Park. Visitors to Gresham can choose from Best Western, Gresham Suites and Shilo Inn-Gresham for temporary stays in the area.