Career and Education Opportunities for Layout Technicians in Oklahoma City, Oklahoma
Layout technicians can find many career and educational opportunities in the Oklahoma City, Oklahoma area. There are currently 100 working layout technicians in Oklahoma; this should shrink by 12% to ninety working layout technicians in the state by 2016. This is not quite as good as the national trend for layout technicians, which sees this job pool shrinking by about 11.6% over the next eight years. In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
Layout technicians earn about $11 per hour or $24,310 annually on average in Oklahoma and about $16 hourly or $34,920 per year on average nationally. Layout technicians earn less than people working in the category of Foundry and Metal Work generally in Oklahoma and more than people in the Foundry and Metal Work category nationally.
The Oklahoma City area is home to forty-four schools of higher education, including four within twenty-five miles of Oklahoma City where you can get a degree as a layout technician. Layout technicians usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Oklahoma City include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Gordon Cooper Technology Center - Shawnee, OK
Gordon Cooper Technology Center, 1 John C Bruton Blvd, Shawnee, OK 74804. Gordon Cooper Technology Center is a small school located in Shawnee, Oklahoma. It is a public school with primarily less-than 2-year programs and has 918 students. Gordon Cooper Technology Center has a one to two year program in Machine Shop Technology/Assistant which graduated twenty-two students in 2008.
Moore Norman Technology Center - Norman, OK
Moore Norman Technology Center, 4701 12th Avenue NW, Norman, OK 73069-8399. Moore Norman Technology Center is a small school located in Norman, Oklahoma. It is a public school with primarily 2-year programs. It has 857 students and an admission rate of 61%. Moore Norman Technology Center has a one to two year program in Machine Shop Technology/Assistant which graduated five students in 2008.
Canadian Valley Technology Center - El Reno, OK
Canadian Valley Technology Center, 6505 E Hwy 66, El Reno, OK 73036. Canadian Valley Technology Center is a small school located in El Reno, Oklahoma. It is a public school with primarily less-than 2-year programs and has 380 students. Canadian Valley Technology Center has a one to two year program in Machine Shop Technology/Assistant which graduated sixteen students in 2008.
Francis Tuttle Technology Center - Oklahoma City, OK
Francis Tuttle Technology Center, 12777 N Rockwell Ave, Oklahoma City, OK 73142-2789. Francis Tuttle Technology Center is a small school located in Oklahoma City, Oklahoma. It is a public school with primarily 2-year programs and has 1,879 students. Francis Tuttle Technology Center has a one to two year program in Machine Tool Technology/Machinist which graduated two students in 2008.
LOCATION INFORMATION: Oklahoma City, Oklahoma
Oklahoma City is located in Oklahoma County, Oklahoma. It has a population of over 551,789, which has grown by 9.0% in the past ten years. The cost of living index in Oklahoma City, 82, is well below the national average. New single-family homes in Oklahoma City cost $142,600 on average, which is below the state average. In 2008, 1,474 new homes were built in Oklahoma City, down from 2,559 the previous year.
The three most popular industries for women in Oklahoma City are health care, educational services, and accommodation and food services. For men, it is construction, public administration, and accommodation and food services. The average travel time to work is about 21 minutes. More than 24.0% of Oklahoma City residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 8.1%, is higher than the state average.
The unemployment rate in Oklahoma City is 6.5%, which is less than Oklahoma's average of 7.1%.
The percentage of Oklahoma City residents that are affiliated with a religious congregation, 65.7%, is more than both the national and state average. Grace Place Baptist Church, Grace Presbyterian Church and Grace United Methodist Church are some of the churches located in Oklahoma City. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Oklahoma City is home to the Colonial Square and the 50 Penn Place as well as Rotary Park and River Park. Shopping malls in the area include 240 Plaza Shopping Center, 74 South Shopping Center and Council Crossings Shopping Center. Visitors to Oklahoma City can choose from Rodeway Inn Oklahoma City, Harvey Janitorial Sales and Market Source for temporary stays in the area.