Career and Education Opportunities for Layout Technicians in Norman, Oklahoma
Layout technicians can find both educational opportunities and jobs in the Norman, Oklahoma area. There are currently 100 jobs for layout technicians in Oklahoma and this is projected to shrink by 12% to ninety jobs by 2016. This is not quite as good as the nation as a whole, where employment opportunities for layout technicians are expected to shrink by about 11.6%. Layout technicians generally lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing.
The income of a layout technician is about $11 hourly or $24,310 annually on average in Oklahoma. In the U.S. as a whole, their income is about $16 per hour or $34,920 per year on average. Incomes for layout technicians are not quite as good as in the overall category of Foundry and Metal Work in Oklahoma, and better than the overall Foundry and Metal Work category nationally.
There are thirty-seven schools of higher education in the Norman area, including three within twenty-five miles of Norman where you can get a degree to start your career as a layout technician. Layout technicians usually hold a high school diploma or GED, so it will take only a short time to learn to be a layout technician if you already have a high school diploma.
CAREER DESCRIPTION: Layout Technician
In general, layout technicians lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. They also includes shipfitters.
Layout technicians fit and align fabricated components to be welded or assembled. They also lift and position workpieces in relation to surface plates, manually or with hoists. Equally important, layout technicians have to lay out and fabricate metal structural components such as plates and frames. Finally, layout technicians mark curves and welding symbols onto workpieces, using scribes, soapstones, punches, and hand drills.
Every day, layout technicians are expected to be able to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for layout technicians to locate center lines and verify template positions, using measuring instruments such as gauge blocks and dial indicators. They are often called upon to compute layout dimensions, and decide on and mark reference points on metal stock or workpieces for further processing, such as welding and assembly. They also formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals. They are sometimes expected to formulate locations and sequences of cutting and welding operations, using compasses and rules. Somewhat less frequently, layout technicians are also expected to add dimensional details to blueprints or drawings made by other staff.
Layout technicians sometimes are asked to add dimensional details to blueprints or drawings made by other staff. And finally, they sometimes have to formulate and develop layouts from blueprints and templates, applying knowledge of trigonometry, layout, effects of heat, and properties of metals.
Like many other jobs, layout technicians must be reliable and be thorough and dependable.
Similar jobs with educational opportunities in Norman include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Layout Technician Training
Mid-America Technology Center - Wayne, OK
Mid-America Technology Center, 27438 State Hwy 59, Wayne, OK 73095-0210. Mid-America Technology Center is a small school located in Wayne, Oklahoma. It is a public school with primarily less-than 2-year programs and has 777 students. Mid-America Technology Center has a one to two year program in Machine Tool Technology/Machinist which graduated eight students in 2008.
Gordon Cooper Technology Center - Shawnee, OK
Gordon Cooper Technology Center, 1 John C Bruton Blvd, Shawnee, OK 74804. Gordon Cooper Technology Center is a small school located in Shawnee, Oklahoma. It is a public school with primarily less-than 2-year programs and has 918 students. Gordon Cooper Technology Center has a one to two year program in Machine Shop Technology/Assistant which graduated twenty-two students in 2008.
Moore Norman Technology Center - Norman, OK
Moore Norman Technology Center, 4701 12th Avenue NW, Norman, OK 73069-8399. Moore Norman Technology Center is a small school located in Norman, Oklahoma. It is a public school with primarily 2-year programs. It has 857 students and an admission rate of 61%. Moore Norman Technology Center has a one to two year program in Machine Shop Technology/Assistant which graduated five students in 2008.
LOCATION INFORMATION: Norman, Oklahoma
Norman is located in Cleveland County, Oklahoma. It has a population of over 106,957, which has grown by 11.8% over the last ten years. The cost of living index in Norman, 84, is well below the national average. New single-family homes in Norman are priced at $184,600 on average, which is well above the state average. In 2008, five hundred sixteen new homes were built in Norman, up from four hundred nineteen the previous year.
The three big industries for women in Norman are educational services, health care, and accommodation and food services. For men, it is educational services, accommodation and food services, and construction. The average commute to work is about 21 minutes. More than 39.8% of Norman residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 16.6%, is higher than the state average.
The unemployment rate in Norman is 4.7%, which is less than Oklahoma's average of 7.1%.
The percentage of Norman residents that are affiliated with a religious congregation, 44.3%, is less than both the national and state average. Alameda Baptist Church, Alameda Church of Christ and All Welcome Victory Church are among the churches located in Norman. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Norman is home to the Cerebral Palsy Institute and the Park on Main as well as Owen Field and Rotary Park. Shopping malls in the area include Colonial Estates Shopping Center, Anatole Shopping Center and Carriage Plaza Shopping Center. Visitors to Norman can choose from Ramada Days Inn, Montford Inn and Guest Inn - Norman for temporary stays in the area.