Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Manufacturing Engineers in Norman, Oklahoma

Manufacturing engineer career and educational opportunities abound in Norman, Oklahoma. There are currently 840 working manufacturing engineers in Oklahoma; this should grow 9% to 920 working manufacturing engineers in the state by 2016. This is better than the national trend for manufacturing engineers, which sees this job pool growing by about 6.7% over the next eight years. In general, manufacturing engineers apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes.

Manufacturing engineers earn approximately $36 per hour or $75,510 per year on average in Oklahoma. Nationally they average about $42 per hour or $88,570 annually. Compared with people working in the overall category of Engineering, people working as manufacturing engineers in Oklahoma earn more. They earn more than people working in the overall category of Engineering nationally. People working as manufacturing engineers can fill a number of jobs, such as: automation engineer, engineer, methods, and process engineer.

The Norman area is home to thirty-seven schools of higher education, including one within twenty-five miles of Norman where you can get a degree as a manufacturing engineer. Manufacturing engineers usually hold a Bachelor's degree, so you can expect to spend about four years studying to be a manufacturing engineer if you already have a high school diploma.

CAREER DESCRIPTION: Manufacturing Engineer

In general, manufacturing engineers apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. They also may work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.

Manufacturing engineers identify opportunities or implement changes to further optimize products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product layout, materials and parts. They also apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality or cost-effectiveness. Equally important, manufacturing engineers have to communicate manufacturing capabilities or other data to enable production processes. They are often called upon to train production personnel in new or existing methods. They are expected to layout testing methods and test finished products or process capabilities to determine standards or validate process requirements. Finally, manufacturing engineers supervise technicians or other engineers.

Every day, manufacturing engineers are expected to be able to read and understand documents and reports. They need to articulate ideas and problems. It is also important that they listen to and understand others in meetings.

Manufacturing engineers sometimes are asked to purchase equipment or parts. They also have to be able to design layouts of equipment or work spaces to attain maximum efficiency and layout or troubleshoot manufacturing equipment. And finally, they sometimes have to furnish technical expertise or support pertaining to manufacturing.

Like many other jobs, manufacturing engineers must be able to absorb the factors involved and a problem and provide a well thought out solution and be reliable.

Similar jobs with educational opportunities in Norman include:

  • Aerodynamics Engineer. Perform a variety of engineering work in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques.
  • Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
  • Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
  • Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
  • Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
  • Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
  • Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
  • Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
  • Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
  • Industrial Engineer. Design, develop, and evaluate integrated systems for managing industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
  • Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
  • Petroleum Engineer. Devise methods to improve oil and gas well production and determine the need for new or modified tool designs. Oversee drilling and offer technical advice to achieve economical and satisfactory progress.
  • Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.

EDUCATIONAL OPPORTUNITIES: Manufacturing Engineer Training

University of Oklahoma Norman Campus - Norman, OK

University of Oklahoma Norman Campus, 660 Parrington Oval, Norman, OK 73019-3072. University of Oklahoma Norman Campus is a large university located in Norman, Oklahoma. It is a public school with primarily 4-year or above programs. It has 26,201 students and an admission rate of 73%. University of Oklahoma Norman Campus has bachelor's degree, master's degree, and doctor's degree programs in Industrial Engineering which graduated thirty-six, seven, and eight students respectively in 2008.

CERTIFICATIONS

Certified Forensic Claims Consultant : AACE International's Certified Forensic Claims Consultant (CFCC) certification program is designed to establish credentials to recognize your professional expertise.

For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.

Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.

For more information, see the American Society of Mechanical Engineers International website.

Certified Energy Manager: Since its inception in 1981, the Certified Energy Manager (CEM®) credential has become widely accepted and used as a measure of professional accomplishment within the energy management field.

For more information, see the Association of Energy Engineers website.

Certified Energy Auditor: The Certified Energy Auditor (CEA) certification identifies professionals as having the required knowledge and experience needed to succeed in the growing field of energy auditing.

For more information, see the Association of Energy Engineers website.

Protective Coatings Specialist: This certification is geared toward individuals who are experienced, knowledgeable and capable of performing work at an advanced level in both the theory and practice of corrosion prevention and control, and who are capable of performing work at an advanced level in the protective coatings field.

For more information, see the NACE International website.

LOCATION INFORMATION: Norman, Oklahoma

Norman, Oklahoma
Norman, Oklahoma photo by Okguy

Norman is located in Cleveland County, Oklahoma. It has a population of over 106,957, which has grown by 11.8% over the last ten years. The cost of living index in Norman, 84, is well below the national average. New single-family homes in Norman are priced at $184,600 on average, which is well above the state average. In 2008, five hundred sixteen new homes were built in Norman, up from four hundred nineteen the previous year.

The three big industries for women in Norman are educational services, health care, and accommodation and food services. For men, it is educational services, accommodation and food services, and construction. The average commute to work is about 21 minutes. More than 39.8% of Norman residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 16.6%, is higher than the state average.

The unemployment rate in Norman is 4.7%, which is less than Oklahoma's average of 7.1%.

The percentage of Norman residents that are affiliated with a religious congregation, 44.3%, is less than both the national and state average. Alameda Baptist Church, Alameda Church of Christ and All Welcome Victory Church are among the churches located in Norman. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.

Norman is home to the Cerebral Palsy Institute and the Park on Main as well as Owen Field and Rotary Park. Shopping malls in the area include Colonial Estates Shopping Center, Anatole Shopping Center and Carriage Plaza Shopping Center. Visitors to Norman can choose from Ramada Days Inn, Montford Inn and Guest Inn - Norman for temporary stays in the area.