Career and Education Opportunities for Architectural Drafters in Norman, Oklahoma
There is a wide variety of career and education opportunities for architectural drafters in the Norman, Oklahoma area. There are currently 1,160 jobs for architectural drafters in Oklahoma and this is projected to grow 8% to about 1,250 jobs by 2016. This is not quite as good as the nation as a whole, where employment opportunities for architectural drafters are expected to grow by about 9.1%. In general, architectural drafters prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
Architectural drafters earn approximately $20 per hour or $43,500 annually on average in Oklahoma. Nationally they average about $21 hourly or $44,490 yearly. Earnings for architectural drafters are better than earnings in the general category of Drafting in Oklahoma and not quite as good as general Drafting category earnings nationally. Jobs in this field include: commercial drafter, oil and gas drafter, and structural drafter.
There are eight schools within twenty-five miles of Norman where you can study to be an architectural drafter, among thirty-seven schools of higher education total in the Norman area. The most common level of education for architectural drafters is an Associate's, or other 2-year degree. You can expect to spend about two years training to become an architectural drafter if you already have a high school diploma.
CAREER DESCRIPTION: Architectural Drafter
In general, architectural drafters prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
Architectural drafters operate computer-aided drafting (CAD) equipment or conventional drafting stations to produce designs, working drawings, charts, forms and records. They also obtain and assemble data to finish architectural designs, visiting job sites to compile measurements as needed. Equally important, architectural drafters have to analyze building codes, by-laws, space and site requirements, and other technical documents and reports to establish their effect on architectural designs. They are often called upon to direct structural, electrical and mechanical designs and decide on a method of presentation to graphically represent building plans. Finally, architectural drafters draw rough and detailed scale plans for foundations, buildings and structures, on the basis of preliminary concepts, sketches, engineering calculations, specification sheets and other data.
Every day, architectural drafters are expected to be able to visualize how things come together and can be organized. They need to think through problems and come up with general rules. It is also important that they see details at a very fine level of focus.
It is important for architectural drafters to lay out and plan interior room arrangements for commercial buildings using computer-assisted drafting (CAD) equipment and software. They are often called upon to develop freehand drawings and lettering to accompany drawings. They also check dimensions of materials to be used and assign numbers to records of materials. They are sometimes expected to ready colored drawings of landscape and interior designs for presentation to client. Somewhat less frequently, architectural drafters are also expected to represent architect on construction site, ensuring builder adherence to layout specifications and advising on layout corrections, under architect's supervision.
They also have to be able to build landscape, architectural and display models And finally, they sometimes have to ready cost estimates, contracts, bidding documents and technical summaries for specific projects under an architect's supervision.
Like many other jobs, architectural drafters must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Norman include:
- Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
- Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
- Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
EDUCATIONAL OPPORTUNITIES: Architectural Drafter Training
Gordon Cooper Technology Center - Shawnee, OK
Gordon Cooper Technology Center, 1 John C Bruton Blvd, Shawnee, OK 74804. Gordon Cooper Technology Center is a small school located in Shawnee, Oklahoma. It is a public school with primarily less-than 2-year programs and has 918 students. Gordon Cooper Technology Center has a one to two year program in Drafting and Design Technology/Technician which graduated five students in 2008.
Oklahoma State University-Oklahoma City - Oklahoma City, OK
Oklahoma State University-Oklahoma City, 900 N Portland, Oklahoma City, OK 73107-6195. Oklahoma State University-Oklahoma City is a medium sized university located in Oklahoma City, Oklahoma. It is a public school with primarily 4-year or above programs and has 5,912 students. Oklahoma State University-Oklahoma City has an associate's degree program in Architectural Drafting and Architectural CAD/CADD which graduated eleven students in 2008.
Mid-Del Technology Center - Midwest City, OK
Mid-Del Technology Center, 1621 Maple Dr, Midwest City, OK 73110-4825. Mid-Del Technology Center is a small school located in Midwest City, Oklahoma. It is a public school with primarily less-than 2-year programs and has 84 students. Mid-Del Technology Center has a one to two year program in Drafting and Design Technology/Technician which graduated two students in 2008.
Mid-America Technology Center - Wayne, OK
Mid-America Technology Center, 27438 State Hwy 59, Wayne, OK 73095-0210. Mid-America Technology Center is a small school located in Wayne, Oklahoma. It is a public school with primarily less-than 2-year programs and has 777 students. Mid-America Technology Center has a one to two year program in Drafting and Design Technology/Technician which graduated ten students in 2008.
ITT Technical Institute-Oklahoma City - Oklahoma City, OK
ITT Technical Institute-Oklahoma City, 50 Penn Place Office Tower, 1900 NW Expressway St.-Ste 305, Oklahoma City, OK 73118. ITT Technical Institute-Oklahoma City is a small school located in Oklahoma City, Oklahoma. It is a private for-profit school with primarily 4-year or above programs. It has 312 students and an admission rate of 43%. ITT Technical Institute-Oklahoma City has an associate's degree program in CAD/CADD Drafting and/or Design Technology/Technician.
Oklahoma City Community College - Oklahoma City, OK
Oklahoma City Community College, 7777 S May Ave, Oklahoma City, OK 73159-9987. Oklahoma City Community College is a large college located in Oklahoma City, Oklahoma. It is a public school with primarily 2-year programs and has 12,550 students. Oklahoma City Community College has a one to two year and an associate's degree program in Architectural Drafting and Architectural CAD/CADD which graduated three and fifteen students respectively in 2008.
Metro Technology Centers - Oklahoma City, OK
Metro Technology Centers, 1900 Springlake Drive, Oklahoma City, OK 73111-5240. Metro Technology Centers is a small school located in Oklahoma City, Oklahoma. It is a public school with primarily 2-year programs and has 987 students. Metro Technology Centers has a less than one year and a one to two year program in Drafting and Design Technology/Technician which graduated one and one students respectively in 2008.
Moore Norman Technology Center - Norman, OK
Moore Norman Technology Center, 4701 12th Avenue NW, Norman, OK 73069-8399. Moore Norman Technology Center is a small school located in Norman, Oklahoma. It is a public school with primarily 2-year programs. It has 857 students and an admission rate of 61%. Moore Norman Technology Center has a one to two year program in Drafting and Design Technology/Technician which graduated four students in 2008.
Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Certified Transfer Station Technical Associate: This certification was developed to address the increased interest in transfer stations and provide transfer station managers and others the opportunity to learn more about transfer station design and operation.
For more information, see the Solid Waste Association of North America website.
LOCATION INFORMATION: Norman, Oklahoma
Norman is located in Cleveland County, Oklahoma. It has a population of over 106,957, which has grown by 11.8% over the last ten years. The cost of living index in Norman, 84, is well below the national average. New single-family homes in Norman are priced at $184,600 on average, which is well above the state average. In 2008, five hundred sixteen new homes were built in Norman, up from four hundred nineteen the previous year.
The three big industries for women in Norman are educational services, health care, and accommodation and food services. For men, it is educational services, accommodation and food services, and construction. The average commute to work is about 21 minutes. More than 39.8% of Norman residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 16.6%, is higher than the state average.
The unemployment rate in Norman is 4.7%, which is less than Oklahoma's average of 7.1%.
The percentage of Norman residents that are affiliated with a religious congregation, 44.3%, is less than both the national and state average. Alameda Baptist Church, Alameda Church of Christ and All Welcome Victory Church are among the churches located in Norman. The largest religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Norman is home to the Cerebral Palsy Institute and the Park on Main as well as Owen Field and Rotary Park. Shopping malls in the area include Colonial Estates Shopping Center, Anatole Shopping Center and Carriage Plaza Shopping Center. Visitors to Norman can choose from Ramada Days Inn, Montford Inn and Guest Inn - Norman for temporary stays in the area.