Career and Education Opportunities for Welders in Raleigh, North Carolina
For those living in the Raleigh, North Carolina area, there are many career and education opportunities for welders. There are currently 9,100 working welders in North Carolina; this should grow by 18% to 10,780 working welders in the state by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
A person working as a welder can expect to earn about $15 per hour or $32,990 yearly on average in North Carolina and about $16 hourly or $33,560 yearly on average in the U.S. as a whole. Compared with people working in the overall category of Foundry and Metal Work, people working as welders in North Carolina earn more. They earn more than people working in the overall category of Foundry and Metal Work nationally.
There are four schools within twenty-five miles of Raleigh where you can study to be a welder, among twenty-nine schools of higher education total in the Raleigh area. The most common level of education for welders is less than a high school diploma. It will take only a short time to learn to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Raleigh include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Wake Technical Community College - Raleigh, NC
Wake Technical Community College, 9101 Fayetteville Road, Raleigh, NC 27603-5696. Wake Technical Community College is a large college located in Raleigh, North Carolina. It is a public school with primarily 2-year programs and has 14,839 students. Wake Technical Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated four and seven students respectively in 2008.
Central Carolina Community College - Sanford, NC
Central Carolina Community College, 1105 Kelly Dr, Sanford, NC 27330-9840. Central Carolina Community College is a small college located in Sanford, North Carolina. It is a public school with primarily 2-year programs and has 4,753 students. Central Carolina Community College has a one to two year program in Welding Technology/Welder which graduated thirteen students in 2008.
Wayne Community College - Goldsboro, NC
Wayne Community College, 3000 Wayne Memorial Dr, Goldsboro, NC 27533-8002. Wayne Community College is a small college located in Goldsboro, North Carolina. It is a public school with primarily 2-year programs and has 3,376 students. Wayne Community College has a one to two year program in Welding Technology/Welder which graduated two students in 2008.
Johnston Community College - Smithfield, NC
Johnston Community College, 245 College Road, Smithfield, NC 27577-2350. Johnston Community College is a small college located in Smithfield, North Carolina. It is a public school with primarily 2-year programs and has 4,128 students. Johnston Community College has a less than one year program in Welding Technology/Welder which graduated one student in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Raleigh, North Carolina
Raleigh is located in Wake County, North Carolina. It has a population of over 392,552, which has grown by 42.2% over the last ten years. The cost of living index in Raleigh, 88, is well below the national average. New single-family homes in Raleigh are valued at $217,600 on average, which is far greater than the state average. In 2008, 1,685 new homes were built in Raleigh, down from 3,224 the previous year.
The top three industries for women in Raleigh are educational services, health care, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 22 minutes. More than 44.9% of Raleigh residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.4%, is higher than the state average.
The unemployment rate in Raleigh is 7.2%, which is less than North Carolina's average of 10.6%.
The percentage of Raleigh residents that are affiliated with a religious congregation, 43.8%, is less than both the national and state average. Highland Church, Hillcrest Church and Wake Chapel are all churches located in Raleigh. The most prominent religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Raleigh is home to the North Ridge Country Club and the Pamlico Junction as well as Carl Alwin Schenck Memorial Forest and Rothgeb Park. Visitors to Raleigh can choose from Hampton Inn - Capital Blvd. North, Best Western Raleigh Inn and Diamond Hospitality Inc for temporary stays in the area.