Career and Education Opportunities for Tool and Die Makers in Raleigh, North Carolina
Many educational and employment opportunities exist for tool and die makers in the Raleigh, North Carolina area. About 2,080 people are currently employed as tool and die makers in North Carolina. By 2016, this is expected to grow 1% to about 2,100 people employed. This is better than the national trend for tool and die makers, which sees this job pool shrinking by about 8.0% over the next eight years. Tool and die makers generally analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
Income for tool and die makers is about $19 per hour or $40,870 per year on average in North Carolina. Nationally, their income is about $22 hourly or $46,430 yearly. Incomes for tool and die makers are better than in the overall category of Foundry and Metal Work in North Carolina, and better than the overall Foundry and Metal Work category nationally.
There are two schools within twenty-five miles of Raleigh where you can study to be a tool and die maker, among twenty-nine schools of higher education total in the Raleigh area. The most common level of education for tool and die makers is a post-secondary certificate. You can expect to spend a short time studying to be a tool and die maker if you already have a high school diploma.
CAREER DESCRIPTION: Tool and Die Maker
In general, tool and die makers analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
Tool and die makers lift and secure machined components on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. They also fit and assemble components to make or modify dies, jigs and tools, using machine tools and hand tools. Equally important, tool and die makers have to file and adjust different components to properly fit them together. They are often called upon to study blueprints or specifications to develop sequences of operations for fabricating tools or assemblies. They are expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators. Finally, tool and die makers decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance.
Every day, tool and die makers are expected to be able to organize information in a variety of ways. They need to maintain precise control of objects and devices through a range of movements. It is also important that they listen to and understand others in meetings.
It is important for tool and die makers to inspect finished dies for smoothness and defects. They are often called upon to prepare and operate conventional or computer numerically controlled machine tools such as lathes and grinders to cut or otherwise shape components to prescribed dimensions and finishes. They also conduct test runs with completed tools or dies to insure that components meet specifications, making adjustments as needed. They are sometimes expected to set pyrometer controls of heat-treating furnaces and feed or place components, tools, or assemblies into furnaces to harden. Somewhat less frequently, tool and die makers are also expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators.
and decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance. And finally, they sometimes have to measure and scribe metal or plastic stock to lay out machining, using instruments such as protractors and rulers.
Like many other jobs, tool and die makers must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Raleigh include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Tool and Die Maker Training
Wake Technical Community College - Raleigh, NC
Wake Technical Community College, 9101 Fayetteville Road, Raleigh, NC 27603-5696. Wake Technical Community College is a large college located in Raleigh, North Carolina. It is a public school with primarily 2-year programs and has 14,839 students. Wake Technical Community College has a one to two year and an associate's degree program in Tool and Die Technology/Technician which graduated zero and six students respectively in 2008.
Central Carolina Community College - Sanford, NC
Central Carolina Community College, 1105 Kelly Dr, Sanford, NC 27330-9840. Central Carolina Community College is a small college located in Sanford, North Carolina. It is a public school with primarily 2-year programs and has 4,753 students. Central Carolina Community College has an associate's degree program in Tool and Die Technology/Technician which graduated eight students in 2008.
LOCATION INFORMATION: Raleigh, North Carolina
Raleigh is located in Wake County, North Carolina. It has a population of over 392,552, which has grown by 42.2% over the last ten years. The cost of living index in Raleigh, 88, is well below the national average. New single-family homes in Raleigh are valued at $217,600 on average, which is far greater than the state average. In 2008, 1,685 new homes were built in Raleigh, down from 3,224 the previous year.
The top three industries for women in Raleigh are educational services, health care, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 22 minutes. More than 44.9% of Raleigh residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.4%, is higher than the state average.
The unemployment rate in Raleigh is 7.2%, which is less than North Carolina's average of 10.6%.
The percentage of Raleigh residents that are affiliated with a religious congregation, 43.8%, is less than both the national and state average. Highland Church, Hillcrest Church and Wake Chapel are all churches located in Raleigh. The most prominent religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.
Raleigh is home to the North Ridge Country Club and the Pamlico Junction as well as Carl Alwin Schenck Memorial Forest and Rothgeb Park. Visitors to Raleigh can choose from Hampton Inn - Capital Blvd. North, Best Western Raleigh Inn and Diamond Hospitality Inc for temporary stays in the area.