Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Buffing Machine Operators in Raleigh, North Carolina

Many educational and employment opportunities exist for buffing machine operators in the Raleigh, North Carolina area. There are currently 2,290 working buffing machine operators in North Carolina; this should shrink 7% to 2,130 working buffing machine operators in the state by 2016. This is better than the national trend for buffing machine operators, which sees this job pool shrinking by about 15.9% over the next eight years. In general, buffing machine operators set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

Buffing machine operators earn about $14 per hour or $29,640 yearly on average in North Carolina and about $14 hourly or $29,460 annually on average nationally. Incomes for buffing machine operators are not quite as good as in the overall category of Foundry and Metal Work in North Carolina, and not quite as good as the overall Foundry and Metal Work category nationally.

There are twenty-nine schools of higher education in the Raleigh area, including five within twenty-five miles of Raleigh where you can get a degree to start your career as a buffing machine operator. Buffing machine operators usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a buffing machine operator if you already have a high school diploma.

CAREER DESCRIPTION: Buffing Machine Operator

In general, buffing machine operators set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.

Buffing machine operators inspect or measure finished workpieces to establish conformance to given requirements, using measuring instruments such as gauges or micrometers. They also observe machine operations to uncover any problems; make needed adjustments to fix problems. Equally important, buffing machine operators have to activate machine start-up switches to grind or cut workpieces, according to given requirements. Finally, buffing machine operators prepare grinding tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces.

Every day, buffing machine operators are expected to be able to maintain precise control of objects and devices through a range of movements. It is also important that they respond quickly in general.

It is important for buffing machine operators to lift and position workpieces, manually or with hoists, and secure them in hoppers or on machine tables or chucks, using clamps. They are often called upon to measure workpieces and lay out work, using precision measuring devices. They also set and adjust machine controls in line with product specifications, utilizing knowledge of machine operation. They are sometimes expected to move machine controls to index workpieces, and to modify machines for pre-selected operational settings. Somewhat less frequently, buffing machine operators are also expected to adjust air cylinders and setting stops to set traverse lengths and feed arm strokes.

Buffing machine operators sometimes are asked to prepare grinding tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic workpieces. and maintain stocks of machine components and machining tools. And finally, they sometimes have to set and adjust machine controls in line with product specifications, utilizing knowledge of machine operation.

Like many other jobs, buffing machine operators must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Raleigh include:

  • Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Buffing Machine Operator Training

Wake Technical Community College - Raleigh, NC

Wake Technical Community College, 9101 Fayetteville Road, Raleigh, NC 27603-5696. Wake Technical Community College is a large college located in Raleigh, North Carolina. It is a public school with primarily 2-year programs and has 14,839 students. Wake Technical Community College has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant.

Central Carolina Community College - Sanford, NC

Central Carolina Community College, 1105 Kelly Dr, Sanford, NC 27330-9840. Central Carolina Community College is a small college located in Sanford, North Carolina. It is a public school with primarily 2-year programs and has 4,753 students. Central Carolina Community College has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant which graduated seven, five, and zero students respectively in 2008.

Wayne Community College - Goldsboro, NC

Wayne Community College, 3000 Wayne Memorial Dr, Goldsboro, NC 27533-8002. Wayne Community College is a small college located in Goldsboro, North Carolina. It is a public school with primarily 2-year programs and has 3,376 students. Wayne Community College has a one to two year and an associate's degree program in Machine Shop Technology/Assistant which graduated zero and three students respectively in 2008.

Johnston Community College - Smithfield, NC

Johnston Community College, 245 College Road, Smithfield, NC 27577-2350. Johnston Community College is a small college located in Smithfield, North Carolina. It is a public school with primarily 2-year programs and has 4,128 students. Johnston Community College has less than one year, one to two year, and associate's degree programs in Machine Shop Technology/Assistant which graduated one, one, and zero students respectively in 2008.

Durham Technical Community College - Durham, NC

Durham Technical Community College, 1637 Lawson St, Durham, NC 27703-5023. Durham Technical Community College is a medium sized college located in Durham, North Carolina. It is a public school with primarily 2-year programs and has 5,214 students. Durham Technical Community College has a less than one year and a one to two year program in Machine Shop Technology/Assistant which graduated two and two students respectively in 2008.

CERTIFICATIONS

Precision Sheet Metal Operator: PSMO Certification is the metal fabricating industry's first comprehensive exam designed to assess a candidate's knowledge of fundamental precision sheet metal fabrication processes in shearing, sawing, press brake, turret punch press, laser cutting, and mechanical finishing.

For more information, see the Fabricators & Manufacturers Association, International website.

LOCATION INFORMATION: Raleigh, North Carolina

Raleigh, North Carolina
Raleigh, North Carolina photo by Jmturner

Raleigh is located in Wake County, North Carolina. It has a population of over 392,552, which has grown by 42.2% over the last ten years. The cost of living index in Raleigh, 88, is well below the national average. New single-family homes in Raleigh are valued at $217,600 on average, which is far greater than the state average. In 2008, 1,685 new homes were built in Raleigh, down from 3,224 the previous year.

The top three industries for women in Raleigh are educational services, health care, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 22 minutes. More than 44.9% of Raleigh residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.4%, is higher than the state average.

The unemployment rate in Raleigh is 7.2%, which is less than North Carolina's average of 10.6%.

The percentage of Raleigh residents that are affiliated with a religious congregation, 43.8%, is less than both the national and state average. Highland Church, Hillcrest Church and Wake Chapel are all churches located in Raleigh. The most prominent religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.

Raleigh is home to the North Ridge Country Club and the Pamlico Junction as well as Carl Alwin Schenck Memorial Forest and Rothgeb Park. Visitors to Raleigh can choose from Hampton Inn - Capital Blvd. North, Best Western Raleigh Inn and Diamond Hospitality Inc for temporary stays in the area.