Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.

Career and Education Opportunities for Mechanical Engineers in Raleigh, North Carolina

There is a wide variety of career and education opportunities for mechanical engineers in the Raleigh, North Carolina area. About 4,700 people are currently employed as mechanical engineers in North Carolina. By 2016, this is expected to grow 8% to 5,080 people employed. This is better than the national trend for mechanical engineers, which sees this job pool growing by about 6.0% over the next eight years. Mechanical engineers generally perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment.

A person working as a mechanical engineer can expect to earn about $33 per hour or $68,870 yearly on average in North Carolina and about $36 hourly or $74,920 annually on average in the U.S. as a whole. Earnings for mechanical engineers are not quite as good as earnings in the general category of Engineering in North Carolina and not quite as good as general Engineering category earnings nationally. People working as mechanical engineers can fill a number of jobs, such as: heating engineer, failure analysis technician, and tool design engineer.

There are twenty-nine schools of higher education in the Raleigh area, including two within twenty-five miles of Raleigh where you can get a degree to start your career as a mechanical engineer. Given that the most common education level for mechanical engineers is a Bachelor's degree, you can expect to spend about four years studying to be a mechanical engineer if you already have a high school diploma.

CAREER DESCRIPTION: Mechanical Engineer

Mechanical Engineer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. They also oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.

Mechanical engineers read and interpret blueprints, technical drawings and computer-generated reports. They also design and test models of alternate designs and processing methods to gauge feasibility, operating condition effects, possible new applications and necessity of modification. Equally important, mechanical engineers have to conduct research that tests and analyzes the feasibility, layout, operation and effectiveness of equipment, components and systems. Finally, mechanical engineers specify system components or direct modification of products to insure conformance with engineering layout and performance specifications.

Every day, mechanical engineers are expected to be able to think through problems and come up with general rules. They need to listen to and understand others in meetings. It is also important that they read and understand documents and reports.

It is important for mechanical engineers to talk with engineers and other personnel to execute operating procedures, resolve system malfunctions, and furnish technical data. They are often called upon to recommend layout modifications to remove machine or system malfunctions. They also research and maintain mechanical products, equipment, systems and processes to fit requirements, applying knowledge of engineering principles. They are sometimes expected to assist drafters in developing the structural layout of products using drafting tools or computer-assisted layout (CAD) or drafting equipment and software. Somewhat less frequently, mechanical engineers are also expected to estimate costs and submit bids for engineering or extraction projects, and ready contract documents.

Mechanical engineers sometimes are asked to layout test control apparatus and equipment and develop processes for testing products. They also have to be able to research and analyze customer layout proposals and other data to review the feasibility and maintenance requirements of designs or applications and solicit new business and furnish technical customer service. And finally, they sometimes have to solicit new business and furnish technical customer service.

Like many other jobs, mechanical engineers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.

Similar jobs with educational opportunities in Raleigh include:

  • Aerodynamics Engineer. Perform a variety of engineering work in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques.
  • Agricultural Engineer. Apply knowledge of engineering technology and biological science to agricultural problems concerned with power and machinery, electrification, structures, soil and water conservation, and processing of agricultural products.
  • Architect. Plan and design structures, such as private residences, office buildings, and other structural property.
  • Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
  • CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
  • Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
  • Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
  • Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
  • Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
  • Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
  • Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
  • Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
  • Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
  • Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
  • Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
  • Industrial Engineer. Design, develop, and evaluate integrated systems for managing industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
  • Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
  • Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
  • Nuclear Engineer. Conduct research on nuclear engineering problems or apply principles and theory of nuclear science to problems concerned with release, control, and utilization of nuclear energy and nuclear waste disposal.
  • Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.

EDUCATIONAL OPPORTUNITIES: Mechanical Engineer Training

North Carolina State University at Raleigh - Raleigh, NC

North Carolina State University at Raleigh, 2101 Hillsborough Street, Raleigh, NC 27695-7001. North Carolina State University at Raleigh is a large university located in Raleigh, North Carolina. It is a public school with primarily 4-year or above programs. It has 32,871 students and an admission rate of 60%. North Carolina State University at Raleigh has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated eight, thirty-three, and ten students respectively in 2008.

Duke University - Durham, NC

Duke University, 103 Allen Bldg, Durham, NC 27708. Duke University is a large university located in Durham, North Carolina. It is a private not-for-profit school with primarily 4-year or above programs. It has 13,871 students and an admission rate of 23%. Duke University has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated ten, seven, and ten students respectively in 2008.


Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.

For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.

Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.

For more information, see the American Society of Mechanical Engineers International website.

Certified in Plumbing Design: The Certified in Plumbing Design (CPD) program is an international certification program for engineers and designers of plumbing systems.

For more information, see the American Society of Plumbing Engineers website.

Certified Associate in Materials Handling: MHMS is proud to offer a professional certification program for its members.

For more information, see the Materials Handling and Management Society website.

PV Installer Certification: The target candidate for NABCEP certification is the person responsible for the system installation (e.

For more information, see the North American Board of Certified Energy Practitioners website.

LOCATION INFORMATION: Raleigh, North Carolina

Raleigh, North Carolina
Raleigh, North Carolina photo by Jmturner

Raleigh is located in Wake County, North Carolina. It has a population of over 392,552, which has grown by 42.2% over the last ten years. The cost of living index in Raleigh, 88, is well below the national average. New single-family homes in Raleigh are valued at $217,600 on average, which is far greater than the state average. In 2008, 1,685 new homes were built in Raleigh, down from 3,224 the previous year.

The top three industries for women in Raleigh are educational services, health care, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average commute to work is about 22 minutes. More than 44.9% of Raleigh residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 14.4%, is higher than the state average.

The unemployment rate in Raleigh is 7.2%, which is less than North Carolina's average of 10.6%.

The percentage of Raleigh residents that are affiliated with a religious congregation, 43.8%, is less than both the national and state average. Highland Church, Hillcrest Church and Wake Chapel are all churches located in Raleigh. The most prominent religious groups are the Southern Baptist Convention, the Catholic Church and the United Methodist Church.

Raleigh is home to the North Ridge Country Club and the Pamlico Junction as well as Carl Alwin Schenck Memorial Forest and Rothgeb Park. Visitors to Raleigh can choose from Hampton Inn - Capital Blvd. North, Best Western Raleigh Inn and Diamond Hospitality Inc for temporary stays in the area.