Career and Education Opportunities for Welders in High Point, North Carolina
Welders can find both educational opportunities and jobs in the High Point, North Carolina area. Currently, 9,100 people work as welders in North Carolina. This is expected to grow 18% to about 10,780 people by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn about $15 hourly or $32,990 annually on average in North Carolina and about $16 per hour or $33,560 yearly on average nationally. Incomes for welders are better than in the overall category of Foundry and Metal Work in North Carolina, and better than the overall Foundry and Metal Work category nationally.
The High Point area is home to twenty-nine schools of higher education, including four within twenty-five miles of High Point where you can get a degree as a welder. Welders usually hold less than a high school diploma, so you can expect to spend only a short time studying to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in High Point include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Davidson County Community College - Thomasville, NC
Davidson County Community College, 297 Davidson Community College Rd, Thomasville, NC 27360-7385. Davidson County Community College is a small college located in Thomasville, North Carolina. It is a public school with primarily 2-year programs and has 3,617 students. Davidson County Community College has a less than one year program in Welding Technology/Welder which graduated nine students in 2008.
Forsyth Technical Community College - Winston Salem, NC
Forsyth Technical Community College, 2100 Silas Creek Pky, Winston Salem, NC 27103-5197. Forsyth Technical Community College is a medium sized college located in Winston Salem, North Carolina. It is a public school with primarily 2-year programs and has 6,748 students. Forsyth Technical Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twelve and six students respectively in 2008.
Rowan-Cabarrus Community College - Salisbury, NC
Rowan-Cabarrus Community College, 1333 Jake Alexander Blvd, Salisbury, NC 28146-1595. Rowan-Cabarrus Community College is a medium sized college located in Salisbury, North Carolina. It is a public school with primarily 2-year programs and has 5,876 students. Rowan-Cabarrus Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated thirty-eight and four students respectively in 2008.
Guilford Technical Community College - Jamestown, NC
Guilford Technical Community College, 601 High Point Rd, Jamestown, NC 27282. Guilford Technical Community College is a large college located in Jamestown, North Carolina. It is a public school with primarily 2-year programs and has 11,289 students. Guilford Technical Community College has a one to two year program in Welding Technology/Welder which graduated ten students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: High Point, North Carolina
High Point is located in Guilford County, North Carolina. It has a population of over 101,835, which has grown by 18.6% over the last ten years. The cost of living index in High Point, 83, is well below the national average. New single-family homes in High Point cost $189,700 on average, which is well above the state average. In 2008, two hundred ninety new homes were constructed in High Point, down from four hundred eighty-nine the previous year.
The three most popular industries for women in High Point are health care, educational services, and finance and insurance. For men, it is furniture and related product manufacturing, construction, and accommodation and food services. The average commute to work is about 20 minutes. More than 25.5% of High Point residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.5%, is lower than the state average.
The unemployment rate in High Point is 11.0%, which is greater than North Carolina's average of 10.6%.
The percentage of High Point residents that are affiliated with a religious congregation, 46.7%, is less than the national average but more than the state average. Hickory Chapel, Mount Carmel Church and Conrad Memorial Church are among the churches located in High Point. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
High Point is home to the Emerywood Country Club and the Uwharrie Council Camp as well as Washington Terrace Park and Armstrong Park. Visitors to High Point can choose from Brookline Furniture CO, Hampton Inn High Point and Fairfield Inn and Stes High Point/Archdl for temporary stays in the area.