Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Tool and Die Makers in High Point, North Carolina

There is a wide variety of career and education opportunities for tool and die makers in the High Point, North Carolina area. Currently, 2,080 people work as tool and die makers in North Carolina. This is expected to grow by 1% to about 2,100 people by 2016. This is better than the nation as a whole, where employment opportunities for tool and die makers are expected to shrink by about 8.0%. In general, tool and die makers analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.

The income of a tool and die maker is about $19 hourly or $40,870 yearly on average in North Carolina. In the U.S. as a whole, their income is about $22 per hour or $46,430 yearly on average. Tool and die makers earn more than people working in the category of Foundry and Metal Work generally in North Carolina and more than people in the Foundry and Metal Work category nationally.

The High Point area is home to twenty-nine schools of higher education, including one within twenty-five miles of High Point where you can get a degree as a tool and die maker. Given that the most common education level for tool and die makers is a post-secondary certificate, you can expect to spend a short time training to become a tool and die maker if you already have a high school diploma.

CAREER DESCRIPTION: Tool and Die Maker

Tool and Die Maker video from the State of New Jersey Dept. of Labor and Workforce Development

In general, tool and die makers analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.

Tool and die makers lift and secure machined components on surface plates or worktables, using hoists, vises, v-blocks, or angle plates. They also fit and assemble components to make or modify dies, jigs and tools, using machine tools and hand tools. Equally important, tool and die makers have to file and adjust different components to properly fit them together. They are often called upon to study blueprints or specifications to develop sequences of operations for fabricating tools or assemblies. They are expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators. Finally, tool and die makers decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance.

Every day, tool and die makers are expected to be able to organize information in a variety of ways. They need to maintain precise control of objects and devices through a range of movements. It is also important that they listen to and understand others in meetings.

It is important for tool and die makers to inspect finished dies for smoothness and defects. They are often called upon to prepare and operate conventional or computer numerically controlled machine tools such as lathes and grinders to cut or otherwise shape components to prescribed dimensions and finishes. They also conduct test runs with completed tools or dies to insure that components meet specifications, making adjustments as needed. They are sometimes expected to set pyrometer controls of heat-treating furnaces and feed or place components, tools, or assemblies into furnaces to harden. Somewhat less frequently, tool and die makers are also expected to verify dimensions and clearances of finished components for conformance to given requirements, using measuring instruments such as calipers and dial indicators.

and decide on metals to be used from a range of metals and alloys, on the basis of properties such as hardness and heat tolerance. And finally, they sometimes have to measure and scribe metal or plastic stock to lay out machining, using instruments such as protractors and rulers.

Like many other jobs, tool and die makers must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in High Point include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Tool and Die Maker Training

Rockingham Community College - Wentworth, NC

Rockingham Community College, Hwy 65w County Home Rd, Wentworth, NC 27375-0038. Rockingham Community College is a small college located in Wentworth, North Carolina. It is a public school with primarily 2-year programs and has 2,098 students. Rockingham Community College has a less than one year program in Tool and Die Technology/Technician which graduated four students in 2008.

LOCATION INFORMATION: High Point, North Carolina

High Point, North Carolina
High Point, North Carolina photo by Yassie

High Point is located in Guilford County, North Carolina. It has a population of over 101,835, which has grown by 18.6% over the last ten years. The cost of living index in High Point, 83, is well below the national average. New single-family homes in High Point cost $189,700 on average, which is well above the state average. In 2008, two hundred ninety new homes were constructed in High Point, down from four hundred eighty-nine the previous year.

The three most popular industries for women in High Point are health care, educational services, and finance and insurance. For men, it is furniture and related product manufacturing, construction, and accommodation and food services. The average commute to work is about 20 minutes. More than 25.5% of High Point residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.5%, is lower than the state average.

The unemployment rate in High Point is 11.0%, which is greater than North Carolina's average of 10.6%.

The percentage of High Point residents that are affiliated with a religious congregation, 46.7%, is less than the national average but more than the state average. Hickory Chapel, Mount Carmel Church and Conrad Memorial Church are among the churches located in High Point. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.

High Point is home to the Emerywood Country Club and the Uwharrie Council Camp as well as Washington Terrace Park and Armstrong Park. Visitors to High Point can choose from Brookline Furniture CO, Hampton Inn High Point and Fairfield Inn and Stes High Point/Archdl for temporary stays in the area.