Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Plumbers in High Point, North Carolina

There are many career and education opportunities for plumbers in the High Point, North Carolina area. About 13,060 people are currently employed as plumbers in North Carolina. By 2016, this is expected to grow 29% to 16,840 people employed. This is better than the nation as a whole, where employment opportunities for plumbers are expected to grow by about 15.3%. Plumbers generally assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

The income of a plumber is about $17 per hour or $36,100 yearly on average in North Carolina. In the U.S. as a whole, their income is about $21 hourly or $45,640 per year on average. Compared with people working in the overall category of Plumbing, people working as plumbers in North Carolina earn more. They earn more than people working in the overall category of Plumbing nationally.

There are two schools within twenty-five miles of High Point where you can study to be a plumber, among twenty-nine schools of higher education total in the High Point area. Given that the most common education level for plumbers is a high school diploma or GED, it will take only a short time to learn to be a plumber if you already have a high school diploma.

CAREER DESCRIPTION: Plumber

Plumber video from the State of New Jersey Dept. of Labor and Workforce Development

In general, plumbers assemble, install, and repair pipes, fittings, and fixtures of heating, water, and drainage systems, according to specifications and plumbing codes.

Plumbers assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment. They also set up pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools. Equally important, plumbers have to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools. They are often called upon to fill pipes or plumbing fixtures with water or air and observe pressure gauges to uncover and locate leaks. They are expected to measure and bend pipe to required angles, using hand and power tools or machines such as pipe cutters, pipe-threading machines, and pipe-bending machines. Finally, plumbers study building plans and inspect structures to gauge material and equipment needs, to determine the sequence of pipe installations, and to develop installation around obstructions such as electrical wiring.

Every day, plumbers are expected to be able to twist and stretch their arms and legs to get work done. They need to control and manipulate objects at a fine level of detail. It is also important that they control objects and devices with precise control.

It is important for plumbers to keep records of assignments and produce detailed work reports. They are often called upon to clear away debris in a renovation. They also perform complex calculations and planning for special or very large jobs. They are sometimes expected to ready written work cost estimates and negotiate contracts. Somewhat less frequently, plumbers are also expected to trim openings in structures to deal with pipes and pipe fittings, using hand and power tools.

Plumbers sometimes are asked to locate and mark the position of pipe installations and fixtures in structures, using measuring instruments such as rulers and levels. They also have to be able to direct staff working on pipe cutting and preassembly and placement of plumbing systems and components and set up underground storm, sanitary and water piping systems and extend piping to connect fixtures and plumbing to these systems. And finally, they sometimes have to set up oxygen and medical gas in hospitals.

Like many other jobs, plumbers must be reliable and be thorough and dependable.

EDUCATIONAL OPPORTUNITIES: Plumber Training

Forsyth Technical Community College - Winston Salem, NC

Forsyth Technical Community College, 2100 Silas Creek Pky, Winston Salem, NC 27103-5197. Forsyth Technical Community College is a medium sized college located in Winston Salem, North Carolina. It is a public school with primarily 2-year programs and has 6,748 students. Forsyth Technical Community College has a less than one year and a one to two year program in Plumbing Technology/Plumber which graduated four and six students respectively in 2008.

Guilford Technical Community College - Jamestown, NC

Guilford Technical Community College, 601 High Point Rd, Jamestown, NC 27282. Guilford Technical Community College is a large college located in Jamestown, North Carolina. It is a public school with primarily 2-year programs and has 11,289 students. Guilford Technical Community College has a one to two year program in Plumbing Technology/Plumber which graduated one student in 2008.

CERTIFICATIONS

Standard Journeyman Plumber: The International Code Council's National Contractor Trades Examination Program is an independent testing program designed to provide licensing agencies with information regarding.

For more information, see the International Code Council website.

Standard Residential Plumber: The International Code Council's National Contractor Trades Examination Program is an.

For more information, see the International Code Council website.

Journeyman Plumber: This certification is designed to test the knowledge that a journey level plumber has of the Uniform Plumbing Code published by the International Association of Plumbing and Mechanical Officials (IAPMO).

For more information, see the National Inspection, Testing and Certification Corporation website.

Journeyman Pipefitter-Steamfitter: The NITC journey level pipefitting/steamfitting certification is based on a written examination that consists of 100 multiple choice questions.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Installer 6010: This examination is covered under NITC's scope of accreditation by the American Standards Institute (ANSI).

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Specialist 6005: Candidates shall have successfully completed twenty-four (24) hours of training covering all facets of piped medical gas and medical-surgical vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Medical Gas Maintenance Personnel 6040: Candidates must have completed thirty-two (32) hours of training in the maintenance of medical gas/vacuum systems, and have a minimum of one (1) year experience in the maintenance of medical gas/vacuum systems.

For more information, see the National Inspection, Testing and Certification Corporation website.

Bulk Medical Gas Systems Installer 6015: Certification to this standard shall be through a method approved by the firm's Quality Control Unit (QCU).

For more information, see the National Inspection, Testing and Certification Corporation website.

IAPMO Mechanical Inspector: IAPMO's National Personnel Certification Program for Inspectors, Plans Examiners and Code Administrators is a nationally recognized, comprehensive testing and certification program that assesses the knowledge of construction codes as an indicator of competence and professionalism.

For more information, see the National Inspection, Testing and Certification Corporation website.

Automatic Sprinkler System Layout: This certification program is for engineering technicians engaged in the layout and detailing of automatic sprinkler systems which must meet existing and proposed code and statutory requirements.

For more information, see the National Institute for Certification in Engineering Technologies website.

LOCATION INFORMATION: High Point, North Carolina

High Point, North Carolina
High Point, North Carolina photo by Yassie

High Point is located in Guilford County, North Carolina. It has a population of over 101,835, which has grown by 18.6% over the last ten years. The cost of living index in High Point, 83, is well below the national average. New single-family homes in High Point cost $189,700 on average, which is well above the state average. In 2008, two hundred ninety new homes were constructed in High Point, down from four hundred eighty-nine the previous year.

The three most popular industries for women in High Point are health care, educational services, and finance and insurance. For men, it is furniture and related product manufacturing, construction, and accommodation and food services. The average commute to work is about 20 minutes. More than 25.5% of High Point residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.5%, is lower than the state average.

The unemployment rate in High Point is 11.0%, which is greater than North Carolina's average of 10.6%.

The percentage of High Point residents that are affiliated with a religious congregation, 46.7%, is less than the national average but more than the state average. Hickory Chapel, Mount Carmel Church and Conrad Memorial Church are among the churches located in High Point. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.

High Point is home to the Emerywood Country Club and the Uwharrie Council Camp as well as Washington Terrace Park and Armstrong Park. Visitors to High Point can choose from Brookline Furniture CO, Hampton Inn High Point and Fairfield Inn and Stes High Point/Archdl for temporary stays in the area.