Career and Education Opportunities for Manufacturing Engineers in High Point, North Carolina
If you want to be a manufacturing engineer, the High Point, North Carolina area offers many opportunities both for education and employment. There are currently 1,810 jobs for manufacturing engineers in North Carolina and this is projected to grow by 21% to about 2,190 jobs by 2016. This is better than the national trend for manufacturing engineers, which sees this job pool growing by about 6.7% over the next eight years. In general, manufacturing engineers apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes.
The income of a manufacturing engineer is about $38 hourly or $80,810 annually on average in North Carolina. In the U.S. as a whole, their income is about $42 hourly or $88,570 annually on average. Incomes for manufacturing engineers are better than in the overall category of Engineering in North Carolina, and better than the overall Engineering category nationally. Jobs in this field include: manufacturing applications engineer, automation engineer, and manufacturing director.
There are twenty-nine schools of higher education in the High Point area, including one within twenty-five miles of High Point where you can get a degree to start your career as a manufacturing engineer. Manufacturing engineers usually hold a Bachelor's degree, so you can expect to spend about four years studying to be a manufacturing engineer if you already have a high school diploma.
CAREER DESCRIPTION: Manufacturing Engineer
In general, manufacturing engineers apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. They also may work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
Manufacturing engineers identify opportunities or implement changes to further optimize products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product layout, materials and parts. They also apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality or cost-effectiveness. Equally important, manufacturing engineers have to communicate manufacturing capabilities or other data to enable production processes. They are often called upon to train production personnel in new or existing methods. They are expected to layout testing methods and test finished products or process capabilities to determine standards or validate process requirements. Finally, manufacturing engineers supervise technicians or other engineers.
Every day, manufacturing engineers are expected to be able to read and understand documents and reports. They need to articulate ideas and problems. It is also important that they listen to and understand others in meetings.
Manufacturing engineers sometimes are asked to purchase equipment or parts. They also have to be able to design layouts of equipment or work spaces to attain maximum efficiency and layout or troubleshoot manufacturing equipment. And finally, they sometimes have to furnish technical expertise or support pertaining to manufacturing.
Like many other jobs, manufacturing engineers must be able to absorb the factors involved and a problem and provide a well thought out solution and be reliable.
Similar jobs with educational opportunities in High Point include:
- Agricultural Engineer. Apply knowledge of engineering technology and biological science to agricultural problems concerned with power and machinery, electrification, structures, soil and water conservation, and processing of agricultural products.
- Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
- Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Industrial Engineer. Design, develop, and evaluate integrated systems for managing industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
EDUCATIONAL OPPORTUNITIES: Manufacturing Engineer Training
North Carolina A & T State University - Greensboro, NC
North Carolina A & T State University, 1601 E Market St, Greensboro, NC 27411. North Carolina A & T State University is a large university located in Greensboro, North Carolina. It is a public school with primarily 4-year or above programs. It has 10,148 students and an admission rate of 56%. North Carolina A & T State University has bachelor's degree, master's degree, and doctor's degree programs in Industrial Engineering which graduated twenty-four, eight, and five students respectively in 2008.
Certified Forensic Claims Consultant : AACE International's Certified Forensic Claims Consultant (CFCC) certification program is designed to establish credentials to recognize your professional expertise.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified Energy Manager: Since its inception in 1981, the Certified Energy Manager (CEM®) credential has become widely accepted and used as a measure of professional accomplishment within the energy management field.
For more information, see the Association of Energy Engineers website.
Certified Energy Auditor: The Certified Energy Auditor (CEA) certification identifies professionals as having the required knowledge and experience needed to succeed in the growing field of energy auditing.
For more information, see the Association of Energy Engineers website.
Protective Coatings Specialist: This certification is geared toward individuals who are experienced, knowledgeable and capable of performing work at an advanced level in both the theory and practice of corrosion prevention and control, and who are capable of performing work at an advanced level in the protective coatings field.
For more information, see the NACE International website.
LOCATION INFORMATION: High Point, North Carolina
High Point is located in Guilford County, North Carolina. It has a population of over 101,835, which has grown by 18.6% over the last ten years. The cost of living index in High Point, 83, is well below the national average. New single-family homes in High Point cost $189,700 on average, which is well above the state average. In 2008, two hundred ninety new homes were constructed in High Point, down from four hundred eighty-nine the previous year.
The three most popular industries for women in High Point are health care, educational services, and finance and insurance. For men, it is furniture and related product manufacturing, construction, and accommodation and food services. The average commute to work is about 20 minutes. More than 25.5% of High Point residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.5%, is lower than the state average.
The unemployment rate in High Point is 11.0%, which is greater than North Carolina's average of 10.6%.
The percentage of High Point residents that are affiliated with a religious congregation, 46.7%, is less than the national average but more than the state average. Hickory Chapel, Mount Carmel Church and Conrad Memorial Church are among the churches located in High Point. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
High Point is home to the Emerywood Country Club and the Uwharrie Council Camp as well as Washington Terrace Park and Armstrong Park. Visitors to High Point can choose from Brookline Furniture CO, Hampton Inn High Point and Fairfield Inn and Stes High Point/Archdl for temporary stays in the area.