Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Electronics Engineering Technicians in High Point, North Carolina

High Point, North Carolina provides a wide variety of opportunities, both career and educational, for electronics engineering technicians. The national trend for electronics engineering technicians sees this job pool shrinking by about 2.2% over the next eight years. Electronics engineering technicians generally lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics.

Electronics engineering technicians earn about $23 hourly or $49,140 per year on average in North Carolina and about $25 hourly or $53,240 yearly on average nationally. Compared with people working in the overall category of Engineering Technologies, people working as electronics engineering technicians in North Carolina earn less. They earn less than people working in the overall category of Engineering Technologies nationally. People working as electronics engineering technicians can fill a number of jobs, such as: electronic specialist, electrical equipment technician, and electrical mechanical fabrication technician.

There are seven schools within twenty-five miles of High Point where you can study to be an electronics engineering technician, among twenty-nine schools of higher education total in the High Point area. Given that the most common education level for electronics engineering technicians is an Associate's, or other 2-year degree, it will take about two years to learn to be an electronics engineering technician if you already have a high school diploma.

CAREER DESCRIPTION: Electronics Engineering Technician

In general, electronics engineering technicians lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. They also usually work under direction of engineering staff.

Electronics engineering technicians adjust and remove faulty or improperly functioning circuitry and electronics components, using hand tools and soldering irons. They also test electronics units, using standard test equipment, and analyze results to review performance and decide on need for adjustment. Equally important, electronics engineering technicians have to read blueprints and engineering instructions for assembling electronics units, applying knowledge of electronic theory. Finally, electronics engineering technicians furnish user applications and engineering support and recommendations for new and existing equipment with regard to installation, upgrades and enhancement.

Every day, electronics engineering technicians are expected to be able to listen to and understand others in meetings. They need to read and understand documents and reports. It is also important that they prioritize information for further consideration.

It is important for electronics engineering technicians to perform preventative maintenance and calibration of equipment and systems. They are often called upon to maintain working knowledge of state-of-the-art tools or software by reading or attending conferences, workshops or other training. They also assemble and maintain circuitry or electronic components in line with engineering instructions and knowledge of electronics, using hand and power tools. They are sometimes expected to maintain system logs and manuals to document testing and operation of equipment. Somewhat less frequently, electronics engineering technicians are also expected to write computer or microprocessor software programs.

Electronics engineering technicians sometimes are asked to layout basic circuitry and draft sketches for clarification of details and layout documentation under engineers' direction, using drafting instruments and computer aided layout (CAD) equipment. They also have to be able to survey satellite receival sites for proper signal level and furnish technical assistance in dish location and installation, transporting dishes as needed and build prototypes from rough sketches or plans. And finally, they sometimes have to assemble and maintain circuitry or electronic components in line with engineering instructions and knowledge of electronics, using hand and power tools.

Like many other jobs, electronics engineering technicians must be reliable and believe in cooperation and coordination.

Similar jobs with educational opportunities in High Point include:

  • CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
  • Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
  • Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
  • Industrial Engineering Technician. Apply engineering theory and principles to problems of industrial layout or manufacturing production, usually under the direction of engineering staff. May study and record time, motion, and speed involved in performance of production, maintenance, and other worker operations for such purposes as establishing standard production rates or improving efficiency.
  • Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
  • Mechanical Engineering Technician. Apply theory and principles of mechanical engineering to modify, develop, and test machinery and equipment under direction of engineering staff or physical scientists.

EDUCATIONAL OPPORTUNITIES: Electronics Engineering Technician Training

Rowan-Cabarrus Community College - Salisbury, NC

Rowan-Cabarrus Community College, 1333 Jake Alexander Blvd, Salisbury, NC 28146-1595. Rowan-Cabarrus Community College is a medium sized college located in Salisbury, North Carolina. It is a public school with primarily 2-year programs and has 5,876 students. Rowan-Cabarrus Community College has an associate's degree program in Electrical, Electronic & Communications Engineering Technology/Technician which graduated eight students in 2008.

Davidson County Community College - Thomasville, NC

Davidson County Community College, 297 Davidson Community College Rd, Thomasville, NC 27360-7385. Davidson County Community College is a small college located in Thomasville, North Carolina. It is a public school with primarily 2-year programs and has 3,617 students. Davidson County Community College has less than one year, one to two year, and associate's degree programs in Electrical, Electronic & Communications Engineering Technology/Technician which graduated zero, zero, and six students respectively in 2008.

Guilford Technical Community College - Jamestown, NC

Guilford Technical Community College, 601 High Point Rd, Jamestown, NC 27282. Guilford Technical Community College is a large college located in Jamestown, North Carolina. It is a public school with primarily 2-year programs and has 11,289 students. Guilford Technical Community College has 2 areas of study related to Electronics Engineering Technician. They are:

  • Electrical, Electronic & Communications Engineering Technology/Technician, one to two year and associate's degree which graduated zero and four students respectively in 2008.
  • Telecommunications Technology/Technician, one to two year and associate's degree which graduated zero and three students respectively in 2008.

ITT Technical InstituteHigh Point - High Point, NC

ITT Technical InstituteHigh Point, 4050 Piedmont Parkway, Ste 110, High Point, NC 27265. ITT Technical InstituteHigh Point is a small school located in High Point, North Carolina. It is a private for-profit school with primarily 4-year or above programs. It has 172 students and an admission rate of 36%. ITT Technical InstituteHigh Point has an associate's degree program in Electrical, Electronic & Communications Engineering Technology/Technician.

Forsyth Technical Community College - Winston Salem, NC

Forsyth Technical Community College, 2100 Silas Creek Pky, Winston Salem, NC 27103-5197. Forsyth Technical Community College is a medium sized college located in Winston Salem, North Carolina. It is a public school with primarily 2-year programs and has 6,748 students. Forsyth Technical Community College has 2 areas of study related to Electronics Engineering Technician. They are:

  • Electrical, Electronic & Communications Engineering Technology/Technician, less than one year and associate's degree which graduated two and six students respectively in 2008.
  • Computer Engineering Technology/Technician, associate's degree which graduated 10 students in 2008.

Rockingham Community College - Wentworth, NC

Rockingham Community College, Hwy 65w County Home Rd, Wentworth, NC 27375-0038. Rockingham Community College is a small college located in Wentworth, North Carolina. It is a public school with primarily 2-year programs and has 2,098 students. Rockingham Community College has 2 areas of study related to Electronics Engineering Technician. They are:

  • Electrical, Electronic & Communications Engineering Technology/Technician, less than one year, one to two year, and associate's degree which graduated zero, one, and zero students respectively in 2008.
  • Electrical & Electronic Engineering Technologies/Technicians, Other Specialties, less than one year and one to two year which graduated one and two students respectively in 2008.

North Carolina A & T State University - Greensboro, NC

North Carolina A & T State University, 1601 E Market St, Greensboro, NC 27411. North Carolina A & T State University is a large university located in Greensboro, North Carolina. It is a public school with primarily 4-year or above programs. It has 10,148 students and an admission rate of 56%. North Carolina A & T State University has 2 areas of study related to Electronics Engineering Technician. They are:

  • Electrical, Electronic & Communications Engineering Technology/Technician, bachelor's degree which graduated 1 student in 2008.
  • Electrical & Electronic Engineering Technologies/Technicians, Other Specialties, bachelor's degree.

CERTIFICATIONS

Calibration Technician: The Certified Calibration Technician tests, calibrates, maintains and repairs electrical, mechanical, electromechanical, analytical and electronic measuring, recording and indicating instruments and equipment for conformance to established standards.

For more information, see the American Society for Quality website.

Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.

For more information, see the American Society of Mechanical Engineers International website.

Certified Lighting Efficiency Professional: AEE's Certified Lighting Efficiency Professional (CLEP) program is designed to provide recognition for professionals who have distinguished themselves as leaders in the field of lighting efficiency.

For more information, see the Association of Energy Engineers website.

Consumer Electronics Service Technician: Consumer Electronics Service Technicians are expected to have knowledge and abilities to operate, install and service home.

For more information, see the ETA International website.

Certified Industrial Electronics Technician: A technician with two or more years of combined work and electronics training may apply for the Journeyman exam.

For more information, see the ETA International website.

Student Electronics Technician (High School Level): Training electronics workers as entry level, apprenticed, installer personnel should include the following 19 Categories: Electrical Theory, Electronic Components, Soldering-Desoldering and Tools, Block Diagrams, Schematics-Wiring Diagrams, Cabling, Power Supplies, Test Equipment & Measurements, Safety Precautions, Mathematics and Formulas, Electronic Circuits: Series and Parallel, Amplifiers, Interfacing of Electronics Products, Digital Concepts and Circuitry, Computer Electronics, Computer Applications, Audio & Video Systems, Optical Electronics, Telecommunications Basics, and Technician Work Procedures.

For more information, see the ETA International website.

RF Line Sweeping: RF Line Sweeping, or FDR, Frequency Domain Reflectometry, certification by the Electronics Technicians Association, Internationa, has two assessments: The 16 category knowledge written multiple-choice examination, and the practical hands-on physical abilities and skills demonstration documented during a formal training course.

For more information, see the ETA International website.

Associate Certified Electronics Technician: Knowledge areas include: Electrical Theory, Electronic Components, Soldering-Desoldering & Tools, Block Diagrams - Schematics - Wiring Diagrams, Cabling, Power Supplies, test Equipment & Measurements, Safety Precautions, Mathematics & Formulas, Radio Communication Technology, Electronic Circuits: Series & Parallel, Amplifiers, Interfacing of Electronics Products, Digital Concepts & Circuitry, Computer Electronics, Computer Applications, Audio & Video Systems, Optical Electronics, Telecommunications Basics, Technician Work Procedures.

For more information, see the ETA International website.

Certified Apprentice Lighting Technician: NALMCO offers a home study certification program, the Certified Apprentice Lighting Technician (CALT), which is indispensable for both entry-level and midlevel lighting management personnel.

For more information, see the International Association of Lighting Management Companies website.

Certified Senior Lighting Technician: NALMCO offers a home study certification program, the Certified Senior Lighting Technician (CSLT) which is indispensable for both entry-level and midlevel lighting management personnel.

For more information, see the International Association of Lighting Management Companies website.

Electron Microscopy Technologist: The Microscopy Society of America (MSA), the world's largest professional association of microscopists, provides the only certification of technologists in biological transmission electron microscopy available in the Americas.

For more information, see the Microscopy Society of America website.

Corrosion Technician: This certification is geared towards personnel with little experience but who possess some basic knowledge of corrosion and corrosion control, who are capable of performing routine, but well-defined work under the close direction of Specialist or Senior Technologist personnel.

For more information, see the NACE International website.

EMC (Electromagnetic Compatibility) Technician: iNARTE's EMC certification is applicable to professional engineers and technicians practicing in EMC fields to include bonding, grounding, shielding, EMI prediction, EMI analysis, conducted and radiated interference, lightning protection and more.

For more information, see the National Association of Radio and Telecommunications Engineers, Inc. website.

ESD (Electrostatic Discharge) Technician: ESD Control certification is appropriate for engineers and technicians whose training and experience have primarily focused on problems, engineering design and corrective measures associated with minimizing or eliminating electrostatic discharge.

For more information, see the National Association of Radio and Telecommunications Engineers, Inc. website.

Junior Telecommunications Technician: Telecommunications certification is applicable to professionals involved in the science and practice of communications by electromagnetic means.

For more information, see the National Association of Radio and Telecommunications Engineers, Inc. website.

System Operator Certification: The System Operator Certification Program awards certification credentials to those individuals who demonstrate that they have attained sufficient knowledge relating to NERC reliability standards and the basic principles of bulk power system operations by passing one of four specialty examinations.

For more information, see the North American Electric Reliability Corporation website.

Broadband Distribution Specialist: Certifies proficiency in the subject matter related to the RF distribution of signals.

For more information, see the Society of Cable Telecommunications Engineers website.

Certified Manufacturing Technologist: This certification primarily benefits new manufacturing engineers and experienced manufacturers without other credentials.

For more information, see the Society of Manufacturing Engineers website.

LICENSES

Scale Technician

Licensing agency: NC Department of Agriculture & Consumer Services
Address: Standards Division, 2 West Edenton Street, Raleigh, NC 27601

Phone: (919) 733-3313
Website: NC Department of Agriculture & Consumer Services Standards Division

LOCATION INFORMATION: High Point, North Carolina

High Point, North Carolina
High Point, North Carolina photo by Yassie

High Point is located in Guilford County, North Carolina. It has a population of over 101,835, which has grown by 18.6% over the last ten years. The cost of living index in High Point, 83, is well below the national average. New single-family homes in High Point cost $189,700 on average, which is well above the state average. In 2008, two hundred ninety new homes were constructed in High Point, down from four hundred eighty-nine the previous year.

The three most popular industries for women in High Point are health care, educational services, and finance and insurance. For men, it is furniture and related product manufacturing, construction, and accommodation and food services. The average commute to work is about 20 minutes. More than 25.5% of High Point residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 6.5%, is lower than the state average.

The unemployment rate in High Point is 11.0%, which is greater than North Carolina's average of 10.6%.

The percentage of High Point residents that are affiliated with a religious congregation, 46.7%, is less than the national average but more than the state average. Hickory Chapel, Mount Carmel Church and Conrad Memorial Church are among the churches located in High Point. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.

High Point is home to the Emerywood Country Club and the Uwharrie Council Camp as well as Washington Terrace Park and Armstrong Park. Visitors to High Point can choose from Brookline Furniture CO, Hampton Inn High Point and Fairfield Inn and Stes High Point/Archdl for temporary stays in the area.