Career and Education Opportunities for Welders in Greensboro, North Carolina
Many educational and employment opportunities exist for welders in the Greensboro, North Carolina area. Currently, 9,100 people work as welders in North Carolina. This is expected to grow 18% to 10,780 people by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn approximately $15 hourly or $32,990 per year on average in North Carolina. Nationally they average about $16 hourly or $33,560 annually. Earnings for welders are better than earnings in the general category of Foundry and Metal Work in North Carolina and better than general Foundry and Metal Work category earnings nationally.
The Greensboro area is home to thirty schools of higher education, including four within twenty-five miles of Greensboro where you can get a degree as a welder. Welders usually hold less than a high school diploma, so it will take only a short time to learn to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Greensboro include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Davidson County Community College - Thomasville, NC
Davidson County Community College, 297 Davidson Community College Rd, Thomasville, NC 27360-7385. Davidson County Community College is a small college located in Thomasville, North Carolina. It is a public school with primarily 2-year programs and has 3,617 students. Davidson County Community College has a less than one year program in Welding Technology/Welder which graduated nine students in 2008.
Forsyth Technical Community College - Winston Salem, NC
Forsyth Technical Community College, 2100 Silas Creek Pky, Winston Salem, NC 27103-5197. Forsyth Technical Community College is a medium sized college located in Winston Salem, North Carolina. It is a public school with primarily 2-year programs and has 6,748 students. Forsyth Technical Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twelve and six students respectively in 2008.
Alamance Community College - Graham, NC
Alamance Community College, 1247 Jimmie Kerr Road, Graham, NC 27253-8000. Alamance Community College is a small college located in Graham, North Carolina. It is a public school with primarily 2-year programs and has 4,607 students. Alamance Community College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated four, zero, and four students respectively in 2008.
Guilford Technical Community College - Jamestown, NC
Guilford Technical Community College, 601 High Point Rd, Jamestown, NC 27282. Guilford Technical Community College is a large college located in Jamestown, North Carolina. It is a public school with primarily 2-year programs and has 11,289 students. Guilford Technical Community College has a one to two year program in Welding Technology/Welder which graduated ten students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Greensboro, North Carolina
Greensboro is situated in Guilford County, North Carolina. It has a population of over 250,642, which has grown by 11.9% over the last ten years. The cost of living index in Greensboro, 84, is well below the national average. New single-family homes in Greensboro are priced at $140,500 on average, which is well below the state average. In 2008, seven hundred fifty-three new homes were built in Greensboro, down from 1,516 the previous year.
The top three industries for women in Greensboro are educational services, health care, and finance and insurance. For men, it is construction, accommodation and food services, and educational services. The average travel time to work is about 20 minutes. More than 33.9% of Greensboro residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 10.8%, is higher than the state average.
The unemployment rate in Greensboro is 10.5%, which is less than North Carolina's average of 10.6%.
The percentage of Greensboro residents that are affiliated with a religious congregation, 46.7%, is less than the national average but more than the state average. Muirs Chapel, Mount Tabor Church and Bass Chapel are all churches located in Greensboro. The most common religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Greensboro is home to the Holden Plaza and the English Market as well as Shannon Woods Park and Lake Daniel Park. Shopping centers in the area include Greenbriar Mall, Golden Gate Shopping Center and Carolina Circle Shopping Mall. Visitors to Greensboro can choose from Greensboro Days Inn, Execustay by Marriot and Biltmore Hotel for temporary stays in the area.