Career and Education Opportunities for Welders in Durham, North Carolina
Many educational and employment opportunities exist for welders in the Durham, North Carolina area. There are currently 9,100 jobs for welders in North Carolina and this is projected to grow 18% to about 10,780 jobs by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
The income of a welder is about $15 hourly or $32,990 per year on average in North Carolina. In the U.S. as a whole, their income is about $16 per hour or $33,560 annually on average. Earnings for welders are better than earnings in the general category of Foundry and Metal Work in North Carolina and better than general Foundry and Metal Work category earnings nationally.
There are four schools within twenty-five miles of Durham where you can study to be a welder, among twenty-six schools of higher education total in the Durham area. Given that the most common education level for welders is less than a high school diploma, you can expect to spend only a short time studying to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Durham include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Cabinet Maker. Cut, shape, and assemble wooden articles or set up and operate a variety of woodworking machines, such as power saws, jointers, and mortisers to surface, cut, or shape lumber or to fabricate parts for wood products.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Structural and Ornamental Metalwork Metal Fabricator. Fabricate, lay out, and fit parts of structural metal products.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Wake Technical Community College - Raleigh, NC
Wake Technical Community College, 9101 Fayetteville Road, Raleigh, NC 27603-5696. Wake Technical Community College is a large college located in Raleigh, North Carolina. It is a public school with primarily 2-year programs and has 14,839 students. Wake Technical Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated four and seven students respectively in 2008.
Alamance Community College - Graham, NC
Alamance Community College, 1247 Jimmie Kerr Road, Graham, NC 27253-8000. Alamance Community College is a small college located in Graham, North Carolina. It is a public school with primarily 2-year programs and has 4,607 students. Alamance Community College has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated four, zero, and four students respectively in 2008.
Piedmont Community College - Roxboro, NC
Piedmont Community College, 1715 College Dr, Roxboro, NC 27573. Piedmont Community College is a small college located in Roxboro, North Carolina. It is a public school with primarily 2-year programs and has 2,590 students. Piedmont Community College has a less than one year and a one to two year program in Welding Technology/Welder which graduated thirty-four and seventeen students respectively in 2008.
Vance-Granville Community College - Henderson, NC
Vance-Granville Community College, I85 and Poplar Creek Rd, Henderson, NC 27536. Vance-Granville Community College is a small college located in Henderson, North Carolina. It is a public school with primarily 2-year programs and has 4,686 students. Vance-Granville Community College has a one to two year program in Welding Technology/Welder which graduated eight students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Durham, North Carolina
Durham is situated in Durham County, North Carolina. It has a population of over 223,284, which has grown by 19.4% over the last ten years. The cost of living index in Durham, 86, is well below the national average. New single-family homes in Durham are valued at $187,200 on average, which is well above the state average. In 2008, 1,082 new homes were built in Durham, down from 1,574 the previous year.
The three most popular industries for women in Durham are health care, educational services, and professional, scientific, and technical services. For men, it is construction, educational services, and health care. The average commute to work is about 21 minutes. More than 41.8% of Durham residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 18.3%, is higher than the state average.
The unemployment rate in Durham is 7.3%, which is less than North Carolina's average of 10.6%.
The percentage of Durham residents that are affiliated with a religious congregation, 39.3%, is less than both the national and state average. Laymans Church, Holy Infant Church and Homestead Heights Church are among the churches located in Durham. The most prominent religious groups are the Southern Baptist Convention, the United Methodist Church and the Catholic Church.
Durham is home to the Hope Valley Country Club and the Union Building as well as Durham County Stadium and Northgate Park. Shopping centers in the area include South Square Mall, Lakewood Shopping Center and Kings Plaza Shopping Center. Visitors to Durham can choose from Brownestone Inn, Durham-Days Inn ) and Hilton Durham for temporary stays in the area.