Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Electromechanical Equipment Assemblers in New York, New York

There are many career and education opportunities for electromechanical equipment assemblers in the New York, New York area. About 5,020 people are currently employed as electromechanical equipment assemblers in New York. By 2016, this is expected to shrink 18% to 4,110 people employed. This is not quite as good as the national trend for electromechanical equipment assemblers, which sees this job pool shrinking by about 10.3% over the next eight years. Electromechanical equipment assemblers generally assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.

Electromechanical equipment assemblers earn approximately $13 hourly or $28,500 per year on average in New York. Nationally they average about $14 hourly or $29,360 per year. Compared with people working in the overall category of Assembling and Fabrication, people working as electromechanical equipment assemblers in New York earn more. They earn more than people working in the overall category of Assembling and Fabrication nationally.

There are 335 schools of higher education in the New York area, including two within twenty-five miles of New York where you can get a degree to start your career as an electromechanical equipment assembler. The most common level of education for electromechanical equipment assemblers is a high school diploma or GED. You can expect to spend only a short time studying to be an electromechanical equipment assembler if you already have a high school diploma.

CAREER DESCRIPTION: Electromechanical Equipment Assembler

Electromechanical Equipment Assembler video from the State of New Jersey Dept. of Labor and Workforce Development

In general, electromechanical equipment assemblers assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, and appliances.

Electromechanical equipment assemblers assemble components or units, and position, align, and fasten units to assemblies or frames, using hand tools and power tools. They also connect cables and wiring, according to given requirements. Finally, electromechanical equipment assemblers position and adjust components for proper fit and assembly.

Every day, electromechanical equipment assemblers are expected to be able to control and manipulate objects at a fine level of detail. They need to move quickly in order to hold onto or control objects and devices.

It is important for electromechanical equipment assemblers to read blueprints and specifications to establish component components and assembly sequences of electromechanical units. They are often called upon to inspect and adjust completed units to insure that units meet specifications and customer order requirements. They also attach name plates and mark identifying data on components. They are sometimes expected to disassemble units to remove components or to crate them for shipping. Somewhat less frequently, electromechanical equipment assemblers are also expected to measure components to establish tolerances, using precision measuring instruments such as micrometers and verniers.

Electromechanical equipment assemblers sometimes are asked to clean and lubricate components and subassemblies, using grease paddles or oilcans. And finally, they sometimes have to read blueprints and specifications to establish component components and assembly sequences of electromechanical units.

Like many other jobs, electromechanical equipment assemblers must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in New York include:

EDUCATIONAL OPPORTUNITIES: Electromechanical Equipment Assembler Training

Union County College - Cranford, NJ

Union County College, 1033 Springfield Ave, Cranford, NJ 07016-1599. Union County College is a large college located in Cranford, New Jersey. It is a public school with primarily 2-year programs and has 11,866 students. Union County College has an associate's degree program in Electromechanical Technology/Electromechanical Engineering Technology which graduated ten students in 2008.

CUNY New York City College of Technology - Brooklyn, NY

CUNY New York City College of Technology, 300 Jay St, Brooklyn, NY 11201-2983. CUNY New York City College of Technology is a large college located in Brooklyn, New York. It is a public school with primarily 4-year or above programs. It has 14,102 students and an admission rate of 88%. CUNY New York City College of Technology has an associate's degree program in Electromechanical Technology/Electromechanical Engineering Technology which graduated twenty-two students in 2008.

CERTIFICATIONS

IPC J-STD-001 Requirements for Soldered Electrical & Electronic Assemblies: The IPC/EIA J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies has emerged as the preeminent authority for electronics assembly manufacturing.

For more information, see the IPC (Institute of Interconnecting and Packaging Electronic Circuits) website.

IPC-A-600 Acceptability of Printed Circuit Boards: The IPC-A-600 Training and Certification Program helps all segments of the electronics interconnection industry improve their understanding of printed board quality issues; greatly enhances communication between PCB manufacturers, their suppliers and their customers; and provides a valuable portable credential to industry professionals as well as recognition for their companies.

For more information, see the IPC (Institute of Interconnecting and Packaging Electronic Circuits) website.

LOCATION INFORMATION: New York, New York

New York, New York
New York, New York photo by UpstateNYer

New York is situated in New York County, New York. It has a population of over 8,363,710, which has grown by 4.4% in the past ten years. The cost of living index in New York, 177, is far greater than the national average.

The three big industries for women in New York are health care, educational services, and professional, scientific, and technical services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 40 minutes. More than 27.4% of New York residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 11.6%, is lower than the state average.

The unemployment rate in New York is 10.3%, which is greater than New York's average of 8.7%.

The percentage of New York residents that are affiliated with a religious congregation, 70.0%, is more than both the national and state average. Saint Lukes Roman Catholic Church, Saint Ann's Episcopal Church and Trinity Church are some of the churches located in New York. The most prominent religious groups are the Catholic Church, the Muslim Estimate and the American Baptist Churches in the USA.

New York is home to the Cadman Plaza and the Flushing Station as well as Victory Field and Whitman Park. Visitors to New York can choose from Boland Corporate Housing, Club Quarters Inc - Reservations and Allied Hotel Marketing Limited for temporary stays in the area.