Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Mechanical Engineers in New York, New York

New York, New York provides a wide variety of opportunities, both career and educational, for mechanical engineers. About 9,480 people are currently employed as mechanical engineers in New York. By 2016, this is expected to shrink 2% to 9,290 people employed. This is not quite as good as the national trend for mechanical engineers, which sees this job pool growing by about 6.0% over the next eight years. In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment.

Mechanical engineers earn about $35 hourly or $73,010 per year on average in New York and about $36 per hour or $74,920 annually on average nationally. Compared with people working in the overall category of Engineering, people working as mechanical engineers in New York earn less. They earn less than people working in the overall category of Engineering nationally. Jobs in this field include: design engineer, facilities mechanical design engineer, and plant equipment engineer.

There are 335 schools of higher education in the New York area, including fourteen within twenty-five miles of New York where you can get a degree to start your career as a mechanical engineer. Mechanical engineers usually hold a Bachelor's degree, so you can expect to spend about four years studying to be a mechanical engineer if you already have a high school diploma.

CAREER DESCRIPTION: Mechanical Engineer

Mechanical Engineer video from the State of New Jersey Dept. of Labor and Workforce Development

In general, mechanical engineers perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. They also oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.

Mechanical engineers read and interpret blueprints, technical drawings and computer-generated reports. They also design and test models of alternate designs and processing methods to gauge feasibility, operating condition effects, possible new applications and necessity of modification. Equally important, mechanical engineers have to conduct research that tests and analyzes the feasibility, layout, operation and effectiveness of equipment, components and systems. Finally, mechanical engineers specify system components or direct modification of products to insure conformance with engineering layout and performance specifications.

Every day, mechanical engineers are expected to be able to think through problems and come up with general rules. They need to listen to and understand others in meetings. It is also important that they read and understand documents and reports.

It is important for mechanical engineers to talk with engineers and other personnel to execute operating procedures, resolve system malfunctions, and furnish technical data. They are often called upon to recommend layout modifications to remove machine or system malfunctions. They also research and maintain mechanical products, equipment, systems and processes to fit requirements, applying knowledge of engineering principles. They are sometimes expected to assist drafters in developing the structural layout of products using drafting tools or computer-assisted layout (CAD) or drafting equipment and software. Somewhat less frequently, mechanical engineers are also expected to estimate costs and submit bids for engineering or extraction projects, and ready contract documents.

Mechanical engineers sometimes are asked to layout test control apparatus and equipment and develop processes for testing products. They also have to be able to research and analyze customer layout proposals and other data to review the feasibility and maintenance requirements of designs or applications and solicit new business and furnish technical customer service. And finally, they sometimes have to solicit new business and furnish technical customer service.

Like many other jobs, mechanical engineers must be thorough and dependable and be able to absorb the factors involved and a problem and provide a well thought out solution.

Similar jobs with educational opportunities in New York include:

  • Agricultural Engineer. Apply knowledge of engineering technology and biological science to agricultural problems concerned with power and machinery, electrification, structures, soil and water conservation, and processing of agricultural products.
  • Architect. Plan and design structures, such as private residences, office buildings, and other structural property.
  • Architectural Drafter. Prepare detailed drawings of architectural designs and plans for buildings and structures according to specifications provided by architect.
  • Biomedical Engineer. Apply knowledge of engineering, biology, and biomechanical principles to the design, development, and evaluation of biological and health systems and products, such as artificial organs, prostheses, instrumentation, medical information systems, and health management and care delivery systems.
  • CAD/CAM Specialist. Prepare detailed working diagrams of machinery and mechanical devices, including dimensions, and other engineering information.
  • Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
  • Civil Draftsman. Prepare drawings and topographical and relief maps used in civil engineering projects, such as highways, bridges, pipelines, flood control projects, and water and sewerage control systems.
  • Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
  • Civil Engineering Technician. Apply theory and principles of civil engineering in planning, designing, and overseeing construction and maintenance of structures and facilities under the direction of engineering staff or physical scientists.
  • Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
  • Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
  • Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
  • Electronics Engineering Technician. Lay out, build, and modify developmental and production electronic components, parts, and systems, such as computer equipment, missile control instrumentation, electron tubes, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics. Usually work under direction of engineering staff.
  • Equipment Engineering Technician. Apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or commercial plants and laboratories. Usually work under direction of engineering staff.
  • Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
  • Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
  • Industrial Engineer. Design, develop, and evaluate integrated systems for managing industrial production processes including human work factors, quality control, inventory control, logistics and material flow, cost analysis, and production coordination.
  • Manufacturing Engineer. Apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. May work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
  • Materials Engineer. Evaluate materials and develop machinery and processes to manufacture materials for use in products that must meet specialized design and performance specifications. Develop new uses for known materials. Includes those working with composite materials or specializing in one type of material, such as graphite, metal and metal alloys, ceramics and glass, plastics and polymers, and naturally occurring materials.
  • Nuclear Engineer. Conduct research on nuclear engineering problems or apply principles and theory of nuclear science to problems concerned with release, control, and utilization of nuclear energy and nuclear waste disposal.
  • Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.

EDUCATIONAL OPPORTUNITIES: Mechanical Engineer Training

Hofstra University - Hempstead, NY

Hofstra University, 100 Hofstra University, Hempstead, NY 11549. Hofstra University is a large university located in Hempstead, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 12,253 students and an admission rate of 54%. Hofstra University has a bachelor's degree program in Mechanical Engineering which graduated twelve students in 2008.

New York Institute of Technology-Manhattan Campus - New York, NY

New York Institute of Technology-Manhattan Campus, 1855 Broadway, New York, NY 10023-7692. New York Institute of Technology-Manhattan Campus is a small school located in New York, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 2,633 students and an admission rate of 66%. New York Institute of Technology-Manhattan Campus has a bachelor's degree program in Mechanical Engineering which graduated two students in 2008.

CUNY LaGuardia Community College - Long Island City, NY

CUNY LaGuardia Community College, 31-10 Thomson Ave, Long Island City, NY 11101. CUNY LaGuardia Community College is a large college located in Long Island City, New York. It is a public school with primarily 2-year programs and has 15,285 students. CUNY LaGuardia Community College has an associate's degree program in Mechanical Engineering which graduated five students in 2008.

Columbia University in the City of New York - New York, NY

Columbia University in the City of New York, 116 St and Broadway, New York, NY 10027. Columbia University in the City of New York is a large university located in New York, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 22,940 students and an admission rate of 11%. Columbia University in the City of New York has bachelor's degree, master's degree, post-master's certificate, and doctor's degree programs in Mechanical Engineering which graduated thirty-eight, twenty-five, nine, and two students respectively in 2008.

CUNY City College - New York, NY

CUNY City College, 160 Convent Ave, New York, NY 10031-9101. CUNY City College is a large college located in New York, New York. It is a public school with primarily 4-year or above programs. It has 15,022 students and an admission rate of 42%. CUNY City College has a bachelor's degree and a master's degree program in Mechanical Engineering which graduated forty-six and thirty-three students respectively in 2008.

New York Institute of Technology-Old Westbury - Old Westbury, NY

New York Institute of Technology-Old Westbury, Northern Blvd, Old Westbury, NY 11568-8000. New York Institute of Technology-Old Westbury is a medium sized school located in Old Westbury, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 5,297 students and an admission rate of 78%. New York Institute of Technology-Old Westbury has a bachelor's degree program in Mechanical Engineering which graduated twenty-two students in 2008.

Rutgers University-New Brunswick - New Brunswick, NJ

Rutgers University-New Brunswick, 83 Somerset St, New Brunswick, NJ 08901-1281. Rutgers University-New Brunswick is a large university located in New Brunswick, New Jersey. It is a public school with primarily 4-year or above programs. It has 36,041 students and an admission rate of 56%. Rutgers University-New Brunswick has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated ninety-seven, eighteen, and eight students respectively in 2008.

Polytechnic Institute of New York University - Brooklyn, NY

Polytechnic Institute of New York University, Six Metrotech Ctr, Brooklyn, NY 11201. Polytechnic Institute of New York University is a small university located in Brooklyn, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 3,983 students and an admission rate of 73%. Polytechnic Institute of New York University has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated twenty-nine, nine, and two students respectively in 2008.

CUNY Graduate School and University Center - New York, NY

CUNY Graduate School and University Center, 365 Fifth Ave, New York, NY 10016-4309. CUNY Graduate School and University Center is a medium sized university located in New York, New York. It is a public school with primarily 4-year or above programs and has 5,827 students. CUNY Graduate School and University Center has a post-master's certificate and a doctor's degree program in Mechanical Engineering which graduated four and two students respectively in 2008.

Stevens Institute of Technology - Hoboken, NJ

Stevens Institute of Technology, Castle Point On Hudson, Hoboken, NJ 07030-5991. Stevens Institute of Technology is a medium sized school located in Hoboken, New Jersey. It is a private not-for-profit school with primarily 4-year or above programs. It has 5,513 students and an admission rate of 53%. Stevens Institute of Technology has a bachelor's degree and a master's degree program in Mechanical Engineering which graduated seventy-four and fifty-four students respectively in 2008.

SUNY Maritime College - Throggs Neck, NY

SUNY Maritime College, 6 Pennyfield Avenue, Throggs Neck, NY 10465-4198. SUNY Maritime College is a small college located in Throggs Neck, New York. It is a public school with primarily 4-year or above programs. It has 1,602 students and an admission rate of 69%. SUNY Maritime College has a bachelor's degree program in Mechanical Engineering which graduated twelve students in 2008.

New Jersey Institute of Technology - Newark, NJ

New Jersey Institute of Technology, University Heights, Newark, NJ 07102. New Jersey Institute of Technology is a medium sized school located in Newark, New Jersey. It is a public school with primarily 4-year or above programs. It has 8,398 students and an admission rate of 66%. New Jersey Institute of Technology has bachelor's degree, master's degree, and doctor's degree programs in Mechanical Engineering which graduated eighty, thirty-four, and four students respectively in 2008.

Cooper Union for the Advancement of Science and Art - New York, NY

Cooper Union for the Advancement of Science and Art, 7 East 7th Street, New York, NY 10003-7120. Cooper Union for the Advancement of Science and Art is a small school located in New York, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 969 students and an admission rate of 9%. Cooper Union for the Advancement of Science and Art has a bachelor's degree and a master's degree program in Mechanical Engineering which graduated twenty-eight and one students respectively in 2008.

Manhattan College - Bronx, NY

Manhattan College, Manhattan College Pky, Bronx, NY 10471-4098. Manhattan College is a small college located in Bronx, New York. It is a private not-for-profit school with primarily 4-year or above programs. It has 3,446 students and an admission rate of 51%. Manhattan College has a bachelor's degree and a master's degree program in Mechanical Engineering which graduated thirty-six and nine students respectively in 2008.

CERTIFICATIONS

Planning and Scheduling Professional: The PSP certification is to recognize specialists who meet a demanding set of planning and scheduling criteria by a rigorous examination, experience, education and ethical qualificaion.

For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.

Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.

For more information, see the American Society of Mechanical Engineers International website.

Certified in Plumbing Design: The Certified in Plumbing Design (CPD) program is an international certification program for engineers and designers of plumbing systems.

For more information, see the American Society of Plumbing Engineers website.

Certified Associate in Materials Handling: MHMS is proud to offer a professional certification program for its members.

For more information, see the Materials Handling and Management Society website.

PV Installer Certification: The target candidate for NABCEP certification is the person responsible for the system installation (e.

For more information, see the North American Board of Certified Energy Practitioners website.

LOCATION INFORMATION: New York, New York

New York, New York
New York, New York photo by UpstateNYer

New York is situated in New York County, New York. It has a population of over 8,363,710, which has grown by 4.4% in the past ten years. The cost of living index in New York, 177, is far greater than the national average.

The three big industries for women in New York are health care, educational services, and professional, scientific, and technical services. For men, it is construction, professional, scientific, and technical services, and accommodation and food services. The average travel time to work is about 40 minutes. More than 27.4% of New York residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 11.6%, is lower than the state average.

The unemployment rate in New York is 10.3%, which is greater than New York's average of 8.7%.

The percentage of New York residents that are affiliated with a religious congregation, 70.0%, is more than both the national and state average. Saint Lukes Roman Catholic Church, Saint Ann's Episcopal Church and Trinity Church are some of the churches located in New York. The most prominent religious groups are the Catholic Church, the Muslim Estimate and the American Baptist Churches in the USA.

New York is home to the Cadman Plaza and the Flushing Station as well as Victory Field and Whitman Park. Visitors to New York can choose from Boland Corporate Housing, Club Quarters Inc - Reservations and Allied Hotel Marketing Limited for temporary stays in the area.