Career and Education Opportunities for Manufacturing Engineers in Albuquerque, New Mexico
There is a wide variety of career and education opportunities for manufacturing engineers in the Albuquerque, New Mexico area. There are currently 1,570 working manufacturing engineers in New Mexico; this should grow 15% to about 1,800 working manufacturing engineers in the state by 2016. This is better than the nation as a whole, where employment opportunities for manufacturing engineers are expected to grow by about 6.7%. In general, manufacturing engineers apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes.
A person working as a manufacturing engineer can expect to earn about $47 hourly or $99,260 per year on average in New Mexico and about $42 per hour or $88,570 annually on average in the U.S. as a whole. Earnings for manufacturing engineers are better than earnings in the general category of Engineering in New Mexico and better than general Engineering category earnings nationally. Jobs in this field include: methods engineer, lean manufacturing engineer, and manufacturing engineering manager.
The Albuquerque area is home to seventeen schools of higher education, including one within twenty-five miles of Albuquerque where you can get a degree as a manufacturing engineer. The most common level of education for manufacturing engineers is a Bachelor's degree. It will take about four years to learn to be a manufacturing engineer if you already have a high school diploma.
CAREER DESCRIPTION: Manufacturing Engineer
In general, manufacturing engineers apply knowledge of materials and engineering theory and methods to design, integrate, and improve manufacturing systems or related processes. They also may work with commercial or industrial designers to refine product designs to increase producibility and decrease costs.
Manufacturing engineers identify opportunities or implement changes to further optimize products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product layout, materials and parts. They also apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality or cost-effectiveness. Equally important, manufacturing engineers have to communicate manufacturing capabilities or other data to enable production processes. They are often called upon to train production personnel in new or existing methods. They are expected to layout testing methods and test finished products or process capabilities to determine standards or validate process requirements. Finally, manufacturing engineers supervise technicians or other engineers.
Every day, manufacturing engineers are expected to be able to read and understand documents and reports. They need to articulate ideas and problems. It is also important that they listen to and understand others in meetings.
Manufacturing engineers sometimes are asked to purchase equipment or parts. They also have to be able to design layouts of equipment or work spaces to attain maximum efficiency and layout or troubleshoot manufacturing equipment. And finally, they sometimes have to furnish technical expertise or support pertaining to manufacturing.
Like many other jobs, manufacturing engineers must be able to absorb the factors involved and a problem and provide a well thought out solution and be reliable.
Similar jobs with educational opportunities in Albuquerque include:
- Chemical Engineer. Design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
- Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
- Nuclear Engineer. Conduct research on nuclear engineering problems or apply principles and theory of nuclear science to problems concerned with release, control, and utilization of nuclear energy and nuclear waste disposal.
- Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
EDUCATIONAL OPPORTUNITIES: Manufacturing Engineer Training
University of New Mexico-Main Campus - Albuquerque, NM
University of New Mexico-Main Campus, , Albuquerque, NM 87131-0001. University of New Mexico-Main Campus is a large university located in Albuquerque, New Mexico. It is a public school with primarily 4-year or above programs. It has 24,105 students and an admission rate of 71%. University of New Mexico-Main Campus has a master's degree program in Manufacturing Engineering which graduated four students in 2008.
Certified Forensic Claims Consultant : AACE International's Certified Forensic Claims Consultant (CFCC) certification program is designed to establish credentials to recognize your professional expertise.
For more information, see the AACE International (Association for the Advancement of Cost Engineering through total cost management) website.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified Energy Manager: Since its inception in 1981, the Certified Energy Manager (CEM®) credential has become widely accepted and used as a measure of professional accomplishment within the energy management field.
For more information, see the Association of Energy Engineers website.
Certified Energy Auditor: The Certified Energy Auditor (CEA) certification identifies professionals as having the required knowledge and experience needed to succeed in the growing field of energy auditing.
For more information, see the Association of Energy Engineers website.
Protective Coatings Specialist: This certification is geared toward individuals who are experienced, knowledgeable and capable of performing work at an advanced level in both the theory and practice of corrosion prevention and control, and who are capable of performing work at an advanced level in the protective coatings field.
For more information, see the NACE International website.
LOCATION INFORMATION: Albuquerque, New Mexico
Albuquerque is situated in Bernalillo County, New Mexico. It has a population of over 521,999, which has grown by 16.4% in the past ten years. The cost of living index in Albuquerque, 89, is well below the national average. New single-family homes in Albuquerque cost $176,100 on average, which is above the state average. In 2008, 1,067 new homes were built in Albuquerque, down from 2,096 the previous year.
The three big industries for women in Albuquerque are health care, educational services, and accommodation and food services. For men, it is construction, professional, scientific, and technical services, and educational services. The average commute to work is about 20 minutes. More than 31.8% of Albuquerque residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 13.4%, is higher than the state average.
The unemployment rate in Albuquerque is 6.9%, which is less than New Mexico's average of 7.5%.
The percentage of Albuquerque residents that are affiliated with a religious congregation, 54.7%, is more than the national average but less than the state average. Heights Seventh Day Adventist Church, Hope Church and Baptist Student Union are some of the churches located in Albuquerque. The most common religious groups are the Catholic Church, the Southern Baptist Convention and the Non-Charismatic Churches Independent.
Albuquerque is home to the Menaul School Historic District and the Volcano Ranch as well as Cutler Park and Eunice Kaloch Park. Shopping centers in the area include Del Norte Parkade Shopping Center, Westway Shopping Center and Winrock Shopping Center. Visitors to Albuquerque can choose from Winrock Inn-Best Western, New Mexico State Government - Health Department- Behavioral Health Services Divi and Motel 6 for temporary stays in the area.