Career and Education Opportunities for Welders in Newark, New Jersey
There are many career and education opportunities for welders in the Newark, New Jersey area. Currently, 4,500 people work as welders in New Jersey. This is expected to shrink 4% to about 4,300 people by 2016. This is not quite as good as the nation as a whole, where employment opportunities for welders are expected to shrink by about 1.6%. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders earn about $17 hourly or $37,390 yearly on average in New Jersey and about $16 hourly or $33,560 annually on average nationally. Earnings for welders are better than earnings in the general category of Foundry and Metal Work in New Jersey and better than general Foundry and Metal Work category earnings nationally.
The Newark area is home to 318 schools of higher education, including three within twenty-five miles of Newark where you can get a degree as a welder. Welders usually hold less than a high school diploma, so it will take only a short time to learn to be a welder if you already have a high school diploma.
CAREER DESCRIPTION: Welder
In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.
It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.
Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.
Like many other jobs, welders must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in Newark include:
- Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Welder Training
Hohokus School of Trade and Technical Sciences - Paterson, NJ
Hohokus School of Trade and Technical Sciences, 634 Market Street, Paterson, NJ 07513. Hohokus School of Trade and Technical Sciences is a small school located in Paterson, New Jersey. It is a private for-profit school with primarily less-than 2-year programs and has 168 students. Hohokus School of Trade and Technical Sciences has a less than one year program in Welding Technology/Welder which graduated forty-eight students in 2008.
Apex Technical School - New York, NY
Apex Technical School, 635 Ave of the Americas, New York, NY 10011. Apex Technical School is a small school located in New York, New York. It is a private for-profit school with primarily less-than 2-year programs and has 1,089 students. Apex Technical School has a one to two year program in Welding Technology/Welder which graduated 161 students in 2008.
Somerset County Technology Institute - Bridgewater, NJ
Somerset County Technology Institute, 14 Vogt Drive, Bridgewater, NJ 08807-0350. Somerset County Technology Institute is a small school located in Bridgewater, New Jersey. It is a public school with primarily 2-year programs and has 576 students. Somerset County Technology Institute has a less than one year program in Welding Technology/Welder which graduated ten students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: Newark, New Jersey
Newark is located in Essex County, New Jersey. It has a population of over 278,980, which has grown by 2.0% in the past ten years. The cost of living index in Newark, 140, is far greater than the national average. New single-family homes in Newark are priced at $83,500 on average, which is far less than the state average. In 2008, ninety-nine new homes were built in Newark, up from twenty-nine the previous year.
The three big industries for women in Newark are health care, educational services, and finance and insurance. For men, it is construction, administrative and support and waste management services, and accommodation and food services. The average commute to work is about 32 minutes. More than 9.0% of Newark residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 3.0%, is lower than the state average.
The unemployment rate in Newark is 14.8%, which is greater than New Jersey's average of 9.3%.
The percentage of Newark residents that are affiliated with a religious congregation, 57.0%, is more than the national average but less than the state average. First Mount Zion Baptist Church, First Newborn Tabernacle Church and First Presbyterian Church are among the churches located in Newark. The most common religious groups are the Catholic Church, the Muslim Estimate and the American Baptist Churches in the USA.
Newark is home to the Clinton Branch Newark Public Library and the Brills Yard as well as Rippel Field and River Bank Park. Visitors to Newark can choose from Fairfield Inn and Suites, Days Hotel Newark Airport and Broad Street Hotel LLC for temporary stays in the area.