Career and Education Opportunities for Chemical Engineers in Manchester, New Hampshire
Chemical engineers can find both educational opportunities and jobs in the Manchester, New Hampshire area. The national trend for chemical engineers sees this job pool shrinking by about 2.0% over the next eight years. Chemical engineers generally design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
The income of a chemical engineer is about $35 per hour or $73,390 annually on average in New Hampshire. In the U.S. as a whole, their income is about $40 hourly or $84,680 yearly on average. Incomes for chemical engineers are not quite as good as in the overall category of Engineering in New Hampshire, and better than the overall Engineering category nationally. People working as chemical engineers can fill a number of jobs, such as: sand analyst, polymerization supervisor, and poly area supervisor.
The Manchester area is home to forty-two schools of higher education, including one within twenty-five miles of Manchester where you can get a degree as a chemical engineer. Given that the most common education level for chemical engineers is a Bachelor's degree, you can expect to spend about four years studying to be a chemical engineer if you already have a high school diploma.
CAREER DESCRIPTION: Chemical Engineer
In general, chemical engineers design chemical plant equipment and devise processes for manufacturing chemicals and products, such as gasoline, synthetic rubber, and pulp, by applying principles and technology of chemistry, physics, and engineering.
Chemical engineers evaluate chemical equipment and processes to pinpoint ways to optimize performance or to insure adherence to safety and environmental regulations. They also design safety procedures to be employed by staff operating equipment or working in close proximity to on-going chemical reactions. Equally important, chemical engineers have to perform laboratory studies of steps in the manufacture of new products and test proposed processes in small scale operations such as pilot plants. They are often called upon to design processes to separate components of liquids or gases or generate electrical currents using controlled chemical processes. They are expected to design and plan layout of equipment. Finally, chemical engineers perform tests and monitor effectiveness of processes throughout stages of production to establish degree of control over variables such as temperature and pressure.
Every day, chemical engineers are expected to be able to listen to and understand others in meetings. They need to read and understand documents and reports. It is also important that they articulate ideas and problems.
It is important for chemical engineers to layout measurement and control systems for chemical plants on the basis of data collected in laboratory experiments and in pilot plant operations. Somewhat less frequently, chemical engineers are also expected to design safety procedures to be employed by staff operating equipment or working in close proximity to on-going chemical reactions.
Chemical engineers sometimes are asked to decide on most effective arrangement of operations such as mixing and drying. They also have to be able to ready estimates of production costs and production progress summaries for management And finally, they sometimes have to design safety procedures to be employed by staff operating equipment or working in close proximity to on-going chemical reactions.
Like many other jobs, chemical engineers must be able to absorb the factors involved and a problem and provide a well thought out solution and be reliable.
Similar jobs with educational opportunities in Manchester include:
- Aerodynamics Engineer. Perform a variety of engineering work in designing, constructing, and testing aircraft, missiles, and spacecraft. May conduct basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. May recommend improvements in testing equipment and techniques.
- Civil Engineer. Perform engineering duties in planning, designing, and overseeing construction and maintenance of building structures, and facilities, such as roads, railroads, airports, bridges, harbors, channels, dams, irrigation projects, pipelines, power plants, water and sewage systems, and waste disposal units. Includes architectural, structural, and geo-technical engineers.
- Computer Engineer. Research, design, and test computer or computer-related equipment for commercial, industrial, or scientific use. May supervise the manufacturing and installation of computer or computer-related equipment and components.
- Electrical Engineer. Design, develop, or supervise the manufacturing and installation of electrical equipment, components, or systems for commercial, industrial, or scientific use.
- Electronics Engineer. Research, design, and test electronic components and systems for commercial, industrial, or scientific use utilizing knowledge of electronic theory and materials properties. Design electronic circuits and components for use in fields such as telecommunications, aerospace guidance and propulsion control, acoustics, or instruments and controls.
- Fire Prevention Research Engineer. Research causes of fires, determine fire protection methods, and design or recommend materials or equipment such as structural components or fire-detection equipment to assist organizations in safeguarding life and property against fire, explosion, and related hazards.
- Health, Safety, and Environment Manager. Plan, implement, and coordinate safety programs, requiring application of engineering principles and technology, to prevent or correct unsafe environmental working conditions.
- Mechanical Engineer. Perform engineering duties in planning and designing tools, engines, and other mechanically functioning equipment. Oversee installation, operation, and repair of such equipment as centralized heat, gas, and steam systems.
- Product Safety Engineer. Develop and conduct tests to evaluate product safety levels and recommend measures to reduce or eliminate hazards.
EDUCATIONAL OPPORTUNITIES: Chemical Engineer Training
University of New Hampshire-Main Campus - Durham, NH
University of New Hampshire-Main Campus, 105 Main St., Thompson Hall, Durham, NH 03824-3547. University of New Hampshire-Main Campus is a large university located in Durham, New Hampshire. It is a public school with primarily 4-year or above programs. It has 14,964 students and an admission rate of 65%. University of New Hampshire-Main Campus has a bachelor's degree and a master's degree program in Chemical Engineering which graduated fifteen and four students respectively in 2008.
Geometric Dimensioning & Tolerancing Professional - Technologist: ASME GDTP Certification provides the means to recognize proficiency in the understanding and application of the geometric dimensioning and tolerancing (GD&T) principles expressed in the ASME Y14.
For more information, see the American Society of Mechanical Engineers International website.
Certified Water Technologist: The Certified Water Technologist (CWT) program represents the highest professional credential in the industrial and commercial water treatment field.
For more information, see the Association of Water Technologies website.
Licensing agency: NH Joint Board of Licensure and Certification
Address: 57 Regional Drive, Concord, NH 03301-8518
Phone: (603) 271-2219
Website: NH Joint Board of Licensure and Certification
LOCATION INFORMATION: Manchester, New Hampshire
Manchester is situated in Hillsborough County, New Hampshire. It has a population of over 108,586, which has grown by 1.5% in the past ten years. The cost of living index in Manchester, 120, is far greater than the national average. New single-family homes in Manchester are valued at $138,300 on average, which is far less than the state average. In 2008, eighty-eight new homes were constructed in Manchester, down from ninety-four the previous year.
The top three industries for women in Manchester are health care, educational services, and finance and insurance. For men, it is construction, accommodation and food services, and computer and electronic products. The average travel time to work is about 21 minutes. More than 22.3% of Manchester residents have a bachelor's degree, which is lower than the state average. The percentage of residents with a graduate degree, 7.0%, is lower than the state average.
The unemployment rate in Manchester is 7.6%, which is greater than New Hampshire's average of 6.5%.
The percentage of Manchester residents that are affiliated with a religious congregation, 58.1%, is more than both the national and state average. Bethel Christian Fellowship Church, Saint Pauls United Methodist Church and Blessed Sacrament Roman Catholic Church are among the churches located in Manchester. The most common religious groups are the Catholic Church, the United Church of Christ and the Greek Orthodox Archdiocese of America.
Manchester is home to the Spaulding House and the New Hampshire Youth Development Center as well as Derryfield Park and Crystal Lake Park. Shopping malls in the area include Hampshire Plaza Shopping Center, The Mall of New Hampshire and Second Street Shoppes Shopping Center. Visitors to Manchester can choose from TAGE Inn & Suites, CNHParking and Firebird Motel for temporary stays in the area.