Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Welders in Omaha, Nebraska

Welders can find many career and educational opportunities in the Omaha, Nebraska area. There are currently 4,420 working welders in Nebraska; this should grow by 22% to 5,390 working welders in the state by 2016. This is better than the national trend for welders, which sees this job pool shrinking by about 1.6% over the next eight years. In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Welders earn about $15 per hour or $31,200 annually on average in Nebraska and about $16 hourly or $33,560 annually on average nationally. Earnings for welders are not quite as good as earnings in the general category of Foundry and Metal Work in Nebraska and better than general Foundry and Metal Work category earnings nationally.

There are thirty-one schools of higher education in the Omaha area, including two within twenty-five miles of Omaha where you can get a degree to start your career as a welder. Given that the most common education level for welders is less than a high school diploma, you can expect to spend only a short time training to become a welder if you already have a high school diploma.

CAREER DESCRIPTION: Welder

In general, welders use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Welders bolt components to set required configurations and positions for welding. They also remove rough spots from workpieces, using portable grinders or scrapers. Equally important, welders have to chip or grind off excess weld or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. They are often called upon to weld components in flat or overhead positions. They are expected to operate safety equipment and use safe work habits. Finally, welders recognize and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.

Every day, welders are expected to be able to control objects and devices with precise control. They need to see details at a very fine level of focus. It is also important that they visualize how things come together and can be organized.

It is important for welders to ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. They are often called upon to examine workpieces for defects and measure workpieces with straightedges or templates to insure conformance with specifications. They also ready all material surfaces to be welded, ensuring that there is no loose or thick scale, slag or other foreign matter. They are sometimes expected to monitor the fitting and welding processes to avoid overheating of components or warping or expansion of material. Somewhat less frequently, welders are also expected to operate manual or semi-automatic welding apparatus to fuse metal segments.

Welders sometimes are asked to operate metal shaping and bending machines, such as brakes and shears. And finally, they sometimes have to decide on and install torches, torch tips and flux, in line with welding chart specifications or types and thicknesses of metals.

Like many other jobs, welders must be thorough and dependable and be reliable.

Similar jobs with educational opportunities in Omaha include:

  • Aircraft Parts Assembler. Assemble, fit, and install parts of airplanes, space vehicles, or missiles, such as tails, wings, fuselage, bulkheads, stabilizers, landing gear, rigging and control equipment, or heating and ventilating systems.
  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Machinist. Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, shop mathematics, and machining procedures.
  • Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Welder Training

Southeast Community College Area - Lincoln, NE

Southeast Community College Area, 301south 68th Street Place, Lincoln, NE 68510-2449. Southeast Community College Area is a large college located in Lincoln, Nebraska. It is a public school with primarily 2-year programs and has 10,557 students. Southeast Community College Area has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated one, zero, and thirty-five students respectively in 2008.

Metropolitan Community College Area - Omaha, NE

Metropolitan Community College Area, 30 & Fort Street, Omaha, NE 68111-1610. Metropolitan Community College Area is a large college located in Omaha, Nebraska. It is a public school with primarily 2-year programs and has 15,055 students. Metropolitan Community College Area has less than one year, one to two year, and associate's degree programs in Welding Technology/Welder which graduated three, one, and two students respectively in 2008.

CERTIFICATIONS

Radiographic Interpreter: The program, based upon requirements contained within AWS B5.

For more information, see the American Welding Society website.

Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.

For more information, see the American Welding Society website.

LOCATION INFORMATION: Omaha, Nebraska

Omaha, Nebraska
Omaha, Nebraska photo by Yassie

Omaha is located in Douglas County, Nebraska. It has a population of over 438,646, which has grown by 12.5% in the past ten years. The cost of living index in Omaha, 81, is well below the national average. New single-family homes in Omaha are valued at $105,100 on average, which is far less than the state average. In 2008, 1,576 new homes were built in Omaha, down from 1,905 the previous year.

The three big industries for women in Omaha are health care, educational services, and finance and insurance. For men, it is construction, accommodation and food services, and professional, scientific, and technical services. The average commute to work is about 18 minutes. More than 28.7% of Omaha residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 9.0%, is higher than the state average.

The unemployment rate in Omaha is 4.7%, which is greater than Nebraska's average of 4.5%.

The percentage of Omaha residents that are affiliated with a religious congregation, 54.5%, is more than the national average but less than the state average. Calvary Baptist Church, Calvary Chapel of Omaha and Calvary Foursquare Gospel Church are all churches located in Omaha. The most common religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the Lutheran Church.

Omaha is home to the Gibson and the Cedar Hills Golf Course as well as Al Caniglia Field and Adams Park. Shopping malls in the area include Frederick Square Shopping Center, North Park Shopping Center and Oak View Mall. Visitors to Omaha can choose from Countryside Suites, Hampton Inn Omaha-Central and Townhouse Inn for temporary stays in the area.