Career and Education Opportunities for Welding Operators in St. Paul, Minnesota
Welding operator career and educational opportunities abound in St. Paul, Minnesota. There are currently 540 working welding operators in Minnesota; this should grow by 4% to 560 working welding operators in the state by 2016. This is better than the national trend for welding operators, which sees this job pool shrinking by about 7.0% over the next eight years. In general, welding operators set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
A person working as a welding operator can expect to earn about $16 hourly or $34,260 yearly on average in Minnesota and about $15 hourly or $31,610 yearly on average in the U.S. as a whole. Earnings for welding operators are not quite as good as earnings in the general category of Foundry and Metal Work in Minnesota and not quite as good as general Foundry and Metal Work category earnings nationally.
There are seventy-seven schools of higher education in the St. Paul area, including six within twenty-five miles of St. Paul where you can get a degree to start your career as a welding operator. The most common level of education for welding operators is a high school diploma or GED. You can expect to spend only a short time training to become a welding operator if you already have a high school diploma.
CAREER DESCRIPTION: Welding Operator
In general, welding operators set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
Every day, welding operators are expected to be able to articulate ideas and problems. They need to see details at a very fine level of focus. It is also important that they move quickly in order to hold onto or control objects and devices.
It is important for welding operators to give directions to other staff regarding machine set-up and use. They are often called upon to prepare and tend welding machines that join or bond components to fabricate metal products or assemblies. They also load or feed workpieces into welding machines to join or bond components. They are sometimes expected to correct problems by adjusting controls or by stopping machines and opening holding devices. Somewhat less frequently, welding operators are also expected to read blueprints and production schedules to establish product or job instructions and specifications.
Welding operators sometimes are asked to observe meters and machine operations to insure that soldering or brazing processes meet specifications. They also have to be able to tend auxiliary equipment used in welding processes And finally, they sometimes have to prepare and tend welding machines that join or bond components to fabricate metal products or assemblies.
Like many other jobs, welding operators must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in St. Paul include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
EDUCATIONAL OPPORTUNITIES: Welding Operator Training
Saint Paul College - A Community and Technical College - Saint Paul, MN
Saint Paul College - A Community and Technical College, 235 Marshall Ave, Saint Paul, MN 55102-9808. Saint Paul College - A Community and Technical College is a medium sized college located in Saint Paul, Minnesota. It is a public school with primarily 2-year programs and has 5,388 students. Saint Paul College - A Community and Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated nineteen and seven students respectively in 2008.
Dakota County Technical College - Rosemount, MN
Dakota County Technical College, 1300 145th Street East, Rosemount, MN 55068-2999. Dakota County Technical College is a small college located in Rosemount, Minnesota. It is a public school with primarily 2-year programs and has 2,919 students. Dakota County Technical College has a one to two year program in Welding Technology/Welder which graduated eleven students in 2008.
Hennepin Technical College - Brooklyn Park, MN
Hennepin Technical College, 9000 Brooklyn Blvd, Brooklyn Park, MN 55445. Hennepin Technical College is a medium sized college located in Brooklyn Park, Minnesota. It is a public school with primarily 2-year programs and has 5,617 students. Hennepin Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twelve and nine students respectively in 2008.
Minneapolis Community and Technical College - Minneapolis, MN
Minneapolis Community and Technical College, 1501 Hennepin Ave, Minneapolis, MN 55403-1779. Minneapolis Community and Technical College is a medium sized college located in Minneapolis, Minnesota. It is a public school with primarily 2-year programs and has 9,539 students. Minneapolis Community and Technical College has a less than one year program in Welding Technology/Welder which graduated two students in 2008.
Anoka Technical College - Anoka, MN
Anoka Technical College, 1355 W Hwy 10, Anoka, MN 55303. Anoka Technical College is a small college located in Anoka, Minnesota. It is a public school with primarily 2-year programs and has 2,072 students. Anoka Technical College has a less than one year program in Welding Technology/Welder which graduated nine students in 2008.
Dunwoody College of Technology - Minneapolis, MN
Dunwoody College of Technology, 818 Dunwoody Blvd, Minneapolis, MN 55403-1192. Dunwoody College of Technology is a small college located in Minneapolis, Minnesota. It is a private not-for-profit school with primarily 4-year or above programs. It has 1,611 students and an admission rate of 68%. Dunwoody College of Technology has a one to two year program in Welding Technology/Welder which graduated twenty-one students in 2008.
LOCATION INFORMATION: St. Paul, Minnesota
St. Paul is located in Ramsey County, Minnesota. It has a population of over 279,590, which has shrunk by 2.6% in the past ten years. The cost of living index in St. Paul, 99, is near the national average. New single-family homes in St. Paul are valued at $213,300 on average, which is well below the state average. In 2008, thirty new homes were built in St. Paul, down from seventy-four the previous year.
The three most popular industries for women in St. Paul are educational services, health care, and finance and insurance. For men, it is educational services, professional, scientific, and technical services, and construction. The average commute to work is about 21 minutes. More than 32.0% of St. Paul residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.0%, is higher than the state average.
The unemployment rate in St. Paul is 7.4%, which is greater than Minnesota's average of 7.0%.
The percentage of St. Paul residents that are affiliated with a religious congregation, 61.3%, is more than both the national and state average. Zion Church, Convent of the Visitation and Saint Paul Cathedral are some of the churches located in St. Paul. The most prominent religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the Baptist General Conference.
St. Paul is home to the Saint Paul Orphange and the Wilder Center as well as Terrace Park and East View Playground.