Career and Education Opportunities for Solderers in St. Paul, Minnesota
St. Paul, Minnesota provides a wide variety of opportunities, both career and educational, for solderers. The national trend for solderers sees this job pool shrinking by about 1.6% over the next eight years. In general, solderers braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
Solderers earn approximately $17 hourly or $36,520 per year on average in Minnesota. Nationally they average about $16 per hour or $33,560 yearly. Incomes for solderers are better than in the overall category of Foundry and Metal Work in Minnesota, and better than the overall Foundry and Metal Work category nationally.
There are seventy-seven schools of higher education in the St. Paul area, including six within twenty-five miles of St. Paul where you can get a degree to start your career as a solderer. The most common level of education for solderers is a high school diploma or GED. You can expect to spend only a short time studying to be a solderer if you already have a high school diploma.
CAREER DESCRIPTION: Solderer
In general, solderers braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
Every day, solderers are expected to be able to see details at a very fine level of focus. They need to control and manipulate objects at a fine level of detail. It is also important that they move quickly in order to hold onto or control objects and devices.
It is important for solderers to heat soldering irons or workpieces to specified temperatures for soldering, using gas flames or electric current. They are often called upon to clean workpieces to remove dirt and excess acid, using chemical solutions or grinders. They also examine seams for defects, and rework faulty joints or broken components. They are sometimes expected to melt and separate brazed or soldered joints to remove and straighten damaged or misaligned components, using hand torches, irons or furnaces. Somewhat less frequently, solderers are also expected to clean joints of workpieces with wire brushes or by dipping them into cleaning solutions.
Solderers sometimes are asked to decide on torch tips and brazing alloys from data charts or work orders. and turn dials to set intensity and duration of ultrasonic impulses, in line with work order specifications. And finally, they sometimes have to melt and apply solder to fill holes and seams of fabricated metal products, using soldering equipment.
Like many other jobs, solderers must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in St. Paul include:
- Auto Body Painter. Operate or tend painting machines to paint surfaces of transportation equipment, such as automobiles, buses, and airplanes.
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Prepress Technician. Set up and prepare material for printing presses.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
EDUCATIONAL OPPORTUNITIES: Solderer Training
Saint Paul College - A Community and Technical College - Saint Paul, MN
Saint Paul College - A Community and Technical College, 235 Marshall Ave, Saint Paul, MN 55102-9808. Saint Paul College - A Community and Technical College is a medium sized college located in Saint Paul, Minnesota. It is a public school with primarily 2-year programs and has 5,388 students. Saint Paul College - A Community and Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated nineteen and seven students respectively in 2008.
Dakota County Technical College - Rosemount, MN
Dakota County Technical College, 1300 145th Street East, Rosemount, MN 55068-2999. Dakota County Technical College is a small college located in Rosemount, Minnesota. It is a public school with primarily 2-year programs and has 2,919 students. Dakota County Technical College has a one to two year program in Welding Technology/Welder which graduated eleven students in 2008.
Hennepin Technical College - Brooklyn Park, MN
Hennepin Technical College, 9000 Brooklyn Blvd, Brooklyn Park, MN 55445. Hennepin Technical College is a medium sized college located in Brooklyn Park, Minnesota. It is a public school with primarily 2-year programs and has 5,617 students. Hennepin Technical College has a less than one year and a one to two year program in Welding Technology/Welder which graduated twelve and nine students respectively in 2008.
Minneapolis Community and Technical College - Minneapolis, MN
Minneapolis Community and Technical College, 1501 Hennepin Ave, Minneapolis, MN 55403-1779. Minneapolis Community and Technical College is a medium sized college located in Minneapolis, Minnesota. It is a public school with primarily 2-year programs and has 9,539 students. Minneapolis Community and Technical College has a less than one year program in Welding Technology/Welder which graduated two students in 2008.
Anoka Technical College - Anoka, MN
Anoka Technical College, 1355 W Hwy 10, Anoka, MN 55303. Anoka Technical College is a small college located in Anoka, Minnesota. It is a public school with primarily 2-year programs and has 2,072 students. Anoka Technical College has a less than one year program in Welding Technology/Welder which graduated nine students in 2008.
Dunwoody College of Technology - Minneapolis, MN
Dunwoody College of Technology, 818 Dunwoody Blvd, Minneapolis, MN 55403-1192. Dunwoody College of Technology is a small college located in Minneapolis, Minnesota. It is a private not-for-profit school with primarily 4-year or above programs. It has 1,611 students and an admission rate of 68%. Dunwoody College of Technology has a one to two year program in Welding Technology/Welder which graduated twenty-one students in 2008.
Radiographic Interpreter: The program, based upon requirements contained within AWS B5.
For more information, see the American Welding Society website.
Certified Robotic Arc Welding: The Certification Program for Robotic Arc Welding - Operators and Technicians (CRAW) allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation.
For more information, see the American Welding Society website.
LOCATION INFORMATION: St. Paul, Minnesota
St. Paul is located in Ramsey County, Minnesota. It has a population of over 279,590, which has shrunk by 2.6% in the past ten years. The cost of living index in St. Paul, 99, is near the national average. New single-family homes in St. Paul are valued at $213,300 on average, which is well below the state average. In 2008, thirty new homes were built in St. Paul, down from seventy-four the previous year.
The three most popular industries for women in St. Paul are educational services, health care, and finance and insurance. For men, it is educational services, professional, scientific, and technical services, and construction. The average commute to work is about 21 minutes. More than 32.0% of St. Paul residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.0%, is higher than the state average.
The unemployment rate in St. Paul is 7.4%, which is greater than Minnesota's average of 7.0%.
The percentage of St. Paul residents that are affiliated with a religious congregation, 61.3%, is more than both the national and state average. Zion Church, Convent of the Visitation and Saint Paul Cathedral are some of the churches located in St. Paul. The most prominent religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the Baptist General Conference.
St. Paul is home to the Saint Paul Orphange and the Wilder Center as well as Terrace Park and East View Playground.