Career and Education Opportunities for Mold Machine Operators in St. Paul, Minnesota
St. Paul, Minnesota provides a wide variety of opportunities, both career and educational, for mold machine operators. There are currently 4,020 working mold machine operators in Minnesota; this should shrink by 8% to about 3,710 working mold machine operators in the state by 2016. This is not quite as good as the national trend for mold machine operators, which sees this job pool shrinking by about 4.4% over the next eight years. In general, mold machine operators set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
The income of a mold machine operator is about $14 per hour or $30,830 per year on average in Minnesota. In the U.S. as a whole, their income is about $13 per hour or $27,390 yearly on average. Incomes for mold machine operators are not quite as good as in the overall category of Foundry and Metal Work in Minnesota, and not quite as good as the overall Foundry and Metal Work category nationally.
The St. Paul area is home to seventy-seven schools of higher education, including two within twenty-five miles of St. Paul where you can get a degree as a mold machine operator. Given that the most common education level for mold machine operators is a high school diploma or GED, it will take only a short time to learn to be a mold machine operator if you already have a high school diploma.
CAREER DESCRIPTION: Mold Machine Operator
In general, mold machine operators set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
Every day, mold machine operators are expected to be able to lift, push and move large and heavy objects. They need to control objects and devices with precise control. It is also important that they move quickly in order to hold onto or control objects and devices.
It is important for mold machine operators to observe continuous operation of automatic machines to insure that products meet specifications and to uncover jams or malfunctions, making adjustments as needed. They are often called upon to measure and visually inspect products for surface and dimension defects in order to insure conformance to given requirements, using precision measuring instruments. They also cool products after processing to inhibit distortion. They are sometimes expected to position and secure workpieces on machines, and start feeding mechanisms. Somewhat less frequently, mold machine operators are also expected to maintain inventories of materials.
Mold machine operators sometimes are asked to adjust equipment and workpiece holding fixtures, such as mold frames and cutting tables, to insure proper functioning. They also have to be able to repair or remove damaged molds or other equipment, using hand tools, hand-powered presses, or jib cranes and observe meters and gauges to confirm and record temperatures, pressures, and press-cycle times. And finally, they sometimes have to set up dies onto machines or presses, then coat dies with parting agents, in line with work order specifications.
Like many other jobs, mold machine operators must be thorough and dependable and be reliable.
Similar jobs with educational opportunities in St. Paul include:
- Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
- Heat Treating Equipment Operator. Set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.
- Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
- Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
- Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
- Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
- Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.
- Woodworking Machine Setter and Operator. Set up, operate, or tend woodworking machines, such as drill presses, lathes, and wood nailing machines.
EDUCATIONAL OPPORTUNITIES: Mold Machine Operator Training
Dunwoody College of Technology - Minneapolis, MN
Dunwoody College of Technology, 818 Dunwoody Blvd, Minneapolis, MN 55403-1192. Dunwoody College of Technology is a small college located in Minneapolis, Minnesota. It is a private not-for-profit school with primarily 4-year or above programs. It has 1,611 students and an admission rate of 68%. Dunwoody College of Technology has an associate's degree and a two to four year program in Graphic and Printing Equipment Operator, General Production which graduated eight and zero students respectively in 2008.
Hennepin Technical College - Brooklyn Park, MN
Hennepin Technical College, 9000 Brooklyn Blvd, Brooklyn Park, MN 55445. Hennepin Technical College is a medium sized college located in Brooklyn Park, Minnesota. It is a public school with primarily 2-year programs and has 5,617 students. Hennepin Technical College has less than one year, one to two year, and associate's degree programs in Graphic and Printing Equipment Operator, General Production which graduated one, one, and seven students respectively in 2008.
National Certification in Plastics : The National Certification in Plastics (NCP) program is a national, voluntary certification examination that tests plastics operations employees' skills and knowledge.
For more information, see the Society of Plastics Industry website.
LOCATION INFORMATION: St. Paul, Minnesota
St. Paul is located in Ramsey County, Minnesota. It has a population of over 279,590, which has shrunk by 2.6% in the past ten years. The cost of living index in St. Paul, 99, is near the national average. New single-family homes in St. Paul are valued at $213,300 on average, which is well below the state average. In 2008, thirty new homes were built in St. Paul, down from seventy-four the previous year.
The three most popular industries for women in St. Paul are educational services, health care, and finance and insurance. For men, it is educational services, professional, scientific, and technical services, and construction. The average commute to work is about 21 minutes. More than 32.0% of St. Paul residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.0%, is higher than the state average.
The unemployment rate in St. Paul is 7.4%, which is greater than Minnesota's average of 7.0%.
The percentage of St. Paul residents that are affiliated with a religious congregation, 61.3%, is more than both the national and state average. Zion Church, Convent of the Visitation and Saint Paul Cathedral are some of the churches located in St. Paul. The most prominent religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the Baptist General Conference.
St. Paul is home to the Saint Paul Orphange and the Wilder Center as well as Terrace Park and East View Playground.