Popular Careers

Career Development

Career development resources for aspiring professionals.

Career Change Center

Career change guides, tutorials and resources for professionals in transition.

Job Search Resources

Job search resources, websites, guides and directories for job seekers.


Career and Education Opportunities for Heat Treating Equipment Operators in St. Paul, Minnesota

Many educational and employment opportunities exist for heat treating equipment operators in the St. Paul, Minnesota area. About 280 people are currently employed as heat treating equipment operators in Minnesota. By 2016, this is expected to shrink by 11% to about 250 people employed. This is not quite as good as the national trend for heat treating equipment operators, which sees this job pool shrinking by about 10.6% over the next eight years. Heat treating equipment operators generally set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Heat treating equipment operators earn approximately $16 per hour or $33,550 annually on average in Minnesota. Nationally they average about $15 hourly or $32,030 per year. Earnings for heat treating equipment operators are not quite as good as earnings in the general category of Foundry and Metal Work in Minnesota and not quite as good as general Foundry and Metal Work category earnings nationally.

There are five schools within twenty-five miles of St. Paul where you can study to be a heat treating equipment operator, among seventy-seven schools of higher education total in the St. Paul area. Heat treating equipment operators usually hold a high school diploma or GED, so you can expect to spend only a short time studying to be a heat treating equipment operator if you already have a high school diploma.

CAREER DESCRIPTION: Heat Treating Equipment Operator

In general, heat treating equipment operators set up, operate, or tend heating equipment, such as heat-treating furnaces, flame-hardening machines, induction machines, or vacuum equipment to temper, harden, or heat-treat metal or plastic objects.

Every day, heat treating equipment operators are expected to be able to respond quickly in general. They need to focus attention on specific tasks without being distracted. It is also important that they maintain precise control of objects and devices through a range of movements.

It is important for heat treating equipment operators to remove components from furnaces after specified times, and air dry or cool components in water or other baths. They are often called upon to read production schedules and work orders to establish processing sequences and heat cycle requirements for objects to be heat-treated. They also decide on types and temperatures of baths and quenching media needed to attain specified part hardness and ductility, using heat-treating charts and knowledge of methods and metals. They are sometimes expected to record times that components are removed from furnaces to document that objects have attained specified temperatures for specified times. Somewhat less frequently, heat treating equipment operators are also expected to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations.

Heat treating equipment operators sometimes are asked to place completed workpieces on conveyors, using cold rods or chain hoists, or signal crane operators to transport them to subsequent stations. They also have to be able to examine components to insure metal shades and colors conform to given requirements, utilizing knowledge of metal heat-treating And finally, they sometimes have to decide on flame temperatures and induction heating coils needed, on the basis of degree of hardness required and properties of stock to be treated.

Like many other jobs, heat treating equipment operators must be reliable and be thorough and dependable.

Similar jobs with educational opportunities in St. Paul include:

  • Buffing Machine Operator. Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
  • Layout Technician. Lay out reference points and dimensions on metal or plastic stock or workpieces, such as sheets, plates, or machine parts, for further processing. Includes shipfitters.
  • Mold Machine Operator. Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
  • Solderer. Braze or solder together components to assemble fabricated metal parts, using soldering iron, torch, or welding machine and flux.
  • Tool and Die Maker. Analyze specifications, lay out metal stock, set up and operate machine tools, and fit and assemble parts to make and repair dies, cutting tools, and machinists' hand tools.
  • Welder. Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
  • Welding Operator. Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, or heat treat metal products, components, or assemblies.

EDUCATIONAL OPPORTUNITIES: Heat Treating Equipment Operator Training

Minneapolis Community and Technical College - Minneapolis, MN

Minneapolis Community and Technical College, 1501 Hennepin Ave, Minneapolis, MN 55403-1779. Minneapolis Community and Technical College is a medium sized college located in Minneapolis, Minnesota. It is a public school with primarily 2-year programs and has 9,539 students. Minneapolis Community and Technical College has a one to two year program in Machine Tool Technology/Machinist which graduated two students in 2008.

Saint Paul College - A Community and Technical College - Saint Paul, MN

Saint Paul College - A Community and Technical College, 235 Marshall Ave, Saint Paul, MN 55102-9808. Saint Paul College - A Community and Technical College is a medium sized college located in Saint Paul, Minnesota. It is a public school with primarily 2-year programs and has 5,388 students. Saint Paul College - A Community and Technical College has a less than one year program in Machine Shop Technology/Assistant which graduated two students in 2008.

Anoka Technical College - Anoka, MN

Anoka Technical College, 1355 W Hwy 10, Anoka, MN 55303. Anoka Technical College is a small college located in Anoka, Minnesota. It is a public school with primarily 2-year programs and has 2,072 students. Anoka Technical College has a one to two year program in Machine Tool Technology/Machinist which graduated ten students in 2008.

Dunwoody College of Technology - Minneapolis, MN

Dunwoody College of Technology, 818 Dunwoody Blvd, Minneapolis, MN 55403-1192. Dunwoody College of Technology is a small college located in Minneapolis, Minnesota. It is a private not-for-profit school with primarily 4-year or above programs. It has 1,611 students and an admission rate of 68%. Dunwoody College of Technology has an associate's degree and a two to four year program in Machine Tool Technology/Machinist which graduated ten and one students respectively in 2008.

Hennepin Technical College - Brooklyn Park, MN

Hennepin Technical College, 9000 Brooklyn Blvd, Brooklyn Park, MN 55445. Hennepin Technical College is a medium sized college located in Brooklyn Park, Minnesota. It is a public school with primarily 2-year programs and has 5,617 students. Hennepin Technical College has less than one year, one to two year, and associate's degree programs in Machine Tool Technology/Machinist which graduated fifteen, three, and four students respectively in 2008.

LOCATION INFORMATION: St. Paul, Minnesota

St. Paul, Minnesota
St. Paul, Minnesota photo by Gridge

St. Paul is located in Ramsey County, Minnesota. It has a population of over 279,590, which has shrunk by 2.6% in the past ten years. The cost of living index in St. Paul, 99, is near the national average. New single-family homes in St. Paul are valued at $213,300 on average, which is well below the state average. In 2008, thirty new homes were built in St. Paul, down from seventy-four the previous year.

The three most popular industries for women in St. Paul are educational services, health care, and finance and insurance. For men, it is educational services, professional, scientific, and technical services, and construction. The average commute to work is about 21 minutes. More than 32.0% of St. Paul residents have a bachelor's degree, which is higher than the state average. The percentage of residents with a graduate degree, 12.0%, is higher than the state average.

The unemployment rate in St. Paul is 7.4%, which is greater than Minnesota's average of 7.0%.

The percentage of St. Paul residents that are affiliated with a religious congregation, 61.3%, is more than both the national and state average. Zion Church, Convent of the Visitation and Saint Paul Cathedral are some of the churches located in St. Paul. The most prominent religious groups are the Catholic Church, the Evangelical Lutheran Church in America and the Baptist General Conference.

St. Paul is home to the Saint Paul Orphange and the Wilder Center as well as Terrace Park and East View Playground.